This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.
Check it out on amazon.com →The Message Class KE_CHACO (Nachrichtenklasse für Ergebnisbereichsmerge / -split) is a standard Message Class in SAP ERP and is part of the package KE.
Message Class | KE_CHACO |
Short Text | Nachrichtenklasse für Ergebnisbereichsmerge / -split |
Package | KE |
ID | Language | Text |
---|---|---|
000 | D | Bitte wählen Sie unterschiedliche Ergebnisbereiche aus |
001 | D | Feld &1 aus Ergebnisbereich &2 ist bereits zugeordnet |
002 | D | Die Felder &1 und &3 sind inkompatibel |
003 | D | Die Felder &1 und &3 sind inkompatibel |
004 | D | Bitte treffen Sie zunächst eine Zuordnung |
005 | D | Zu Mengenfeld &1 aus Erg.bereich &2 existiert kein Mengeneinheitsfeld |
006 | D | Es existieren bereits eine Zuordnung bzw. Selektionen -> Siehe Langtext |
007 | D | Das Feld &1 ist ungültig, da es nicht in Ergebnisbereich &2 existiert |
008 | D | Die Einfügen von Datensätzen in Tabelle &1 schlug fehl |
009 | D | Die Zuordnungen wurden erfolgreich in den Tabellen &1 und &2 verbucht |
010 | D | Bitte geben Sie gültige Druckparameter an |
011 | D | Für die Ergebnisbereiche &1 und &2 existiert keine Zuordnung |
012 | D | Bitte weisen Sie bitte mindestens ein Wert- oder Mengenfeld zu |
013 | D | Feld &1 existiert nicht mehr in Ergebnisbereich &2 |
014 | D | Die Felder &1 und &3 sind inkompatibel |
015 | D | Die Generierung eines Subroutinenpools aus Programm &1 war fehlerhaft |
016 | D | Feld &1 existiert nicht in Ergebnisbereich &2 -> Siehe Langtext |
017 | D | Feld &1 fehlt in Ergebnisbereich &2 und kann nicht selektiert werden |
018 | D | Wert &1 existiert nicht für Merkmal &2 und wird daher nicht übernommen |
019 | D | Feld &1 existiert nicht in Ergebnisbereich &2 -> Siehe Langtext |
020 | D | Beim Exportieren von Daten in den Datenbankpuffer trat ein Fehler auf |
021 | D | Beim Importieren von Daten aus dem Datenbankpuffer trat ein Fehler auf |
022 | D | RFC-Fehler: &1 |
023 | D | Die Datei &1 konnte nicht geöffnet werden |
024 | D | Die Datei &1 konnte nicht geschlossen werden |
025 | D | Beim Schreiben von Daten in Datei &1 trat ein Fehler auf |
026 | D | Bitte wählen Sie zwei unterschiedliche Dateinamen aus |
027 | D | Bitte wählen Sie mindestens 1000 Sätze pro Paket |
028 | D | Bitte wählen Sie maximal 10 Prozesse |
029 | D | Beim Löschen von Datei &1 trat ein Fehler auf |
030 | D | Für Ergebnisbereich &1 und &2 wurde noch kein Datenexport durchgeführt |
031 | D | Beim Lesen von Daten aus Datei &1 trat ein Fehler auf |
032 | D | Für Ergebnisbereich &1 und &2 war der Datenexport nicht vollständig |
033 | D | Für Ergebnisbereich &1 und &2 wurde bereits ein Datenexport durchgeführt |
034 | D | Für Ergebnisbereich &1 und &2 wurde bereits ein Datenexport durchgeführt |
035 | D | Tabelle TKECHACOAD und TKECHACOBL sind inkonsistent |
036 | D | Bitte beachten Sie die Auswirkungen des Programms -> Siehe Langtext |
037 | D | Für Ergebnisbereich &1 und &2 wurde bereits ein Datenexport durchgeführt |
038 | D | Datenübernahme von Ergebnisbereich &1 nach &2 |
039 | D | |
040 | D | Beginn der Übernahme: &1, &2 |
041 | D | Ende der Übernahme: &1, &2 |
042 | D | Übernahmeart: &1 |
043 | D | & & & & |
044 | D | Anzahl gelesener Einzelposten: &1 |
045 | D | Verarbeitung von Block &1: &2 |
046 | D | Es wurden keine den Selektionen entsprechenden Protokolle gefunden |
047 | D | Die Merkmalswerte von Feld &1 werden nicht verprobt -> Siehe Langtext |
048 | D | Bitte geben Sie ein Bewertungsdatum für die Plandaten an |
049 | D | Das Löschen von Datensätzen aus Tabelle &1 schlug fehl |
050 | D | &1 Protokolle wurden erfolgreich gelöscht |
051 | D | Bitte geben Sie einen Ausgabe- bzw. Fehlerdateinamen an |
052 | D | &1 im &2: Erfolgreich beendet |
053 | D | &1 im &2: Mit Fehlern beendet |
054 | D | Bitte wählen Sie mindestens eine der Optionen 'Testlauf' bzw. 'Echtlauf' |
055 | D | Verarbeitungsmodus: &1 |
056 | D | Das Programm kann nur in Releases >= 4.5 verwendet werden |
057 | D | Anzahl umgesetzter Tabellenzeilen: &1 |
058 | D | Bitte geben Sie genau einen alten Ergebnisbereich an |
059 | D | Alter Ergebnisbereich &1: &2 |
060 | D | Beginn: &1 / &2 |
061 | D | Ende: &1 / &2 |
062 | D | Schritt &1: &2 |
063 | D | Das Aktualisieren von Datensätzen aus Tabelle &1 schlug fehl |
064 | D | &1 Statussätze wurden erfolgreich gelöscht |
065 | D | In Kundensystemen wird Programm &1 automatisch im Testlauf ausgeführt |
066 | D | Beim Lesen des Nummernkreisobjekts COPA_OBJ / &1 trat ein Fehler auf |
067 | D | Kostenrechnungskreis: &1 |
068 | D | Maximaler Nummernkreisstand COPA_OBJ im alten Ergebnisbereich &1: &2 |
069 | D | Addiertes Sicherheitsdelta: &1 |
070 | D | Neuer Nummernkreisstand COPA_OBJ im neuen aktiven Ergebnisbereich &1: &2 |
071 | D | Tabelle &1 enthält bereits Daten -> Siehe Langtext |
072 | D | Tabelle &1 existiert nicht |
073 | D | Der Nummernkreisstand von COPA_OBJ / &1 ist nicht null -> Siehe Langtext |
074 | D | Ergebnisobjekte wurden noch nicht im &1 kopiert |
075 | D | Ergebnisobjekte wurden bereits im &1 kopiert |
076 | D | Nummernkreis COPA_OBJ / &1 wurde noch nicht im &2 hochgesetzt |
077 | D | Nummernkreis COPA_OBJ / &1 wurde bereits im &2 hochgesetzt |
078 | D | Ergebnisobjekte wurden noch nicht im &1 gelöscht |
079 | D | Ergebnisobjekte wurden bereits im &1 gelöscht |
080 | D | Der zu setzende Nummernkreisstand &1 für COPA_OBJ / &2 ist zu klein |
081 | D | Anzahl geprüfter Tabellenzeilen: &1 |
082 | D | Ergebnisobjekt &1 existiert nicht in Ergebnisbereich &2 |
083 | D | Tabelle &1 wurde nicht gelöscht, da noch Daten in Mandant &2 existieren |
084 | D | Tabelle &1 wird bereits in einer Umsetzung verwendet -> Siehe Langtext |
085 | D | Geschäftsjahr: &1 |
100 | D | Bitte beachten Sie die Auswirkungen des Programms -> Siehe Langtext |
101 | D | Für diese Selektion existiert kein Ergebnisobjekt |
102 | D | Bitte schränken Sie die Selektion auf ein Ergebnisobjekt ein |
103 | D | Die alten Customizingzuordnungen wurden erfolgreich gesichert |
104 | D | &1 wurde bereits umgesetzt -> Siehe Langtext |
105 | D | &1 wurden bereits umgesetzt -> Siehe Langtext |
106 | D | &1 noch nicht erfolgreich im Testlauf konvertiert -> Siehe Langtext |
107 | D | &1 noch nicht erfolgreich im Testlauf konvertiert -> Siehe Langtext |
108 | D | Zum Werk &1 wurde kein Buchungskreis gefunden |
109 | D | Buchungskreis aus Werk: Buchungskreis &1 und &2 sind verschieden |
110 | D | Verkaufsorganisation &1 existiert nicht |
111 | D | Buchungskreis aus Verkaufsorg.: Buchungskreis &1 und &2 sind verschieden |
112 | D | Zum Buchungskreis &1 wurde kein Kostenrechnungskreis gefunden |
113 | D | Es wurde weder ein Buchungkreis noch ein Kostenrechnungskreis gefunden |
114 | D | Kostenrechnungskr. &1 aus Tabelle und &2 aus Org.daten sind inkonsistent |
115 | D | Ergebnisbereich &1: |
116 | D | Kostenrechnungskreis &1 ist zugeordnet, existiert aber nicht |
117 | D | Ergebnisbereich ist nicht zugeordnet |
118 | D | &1 ist aktiv |
119 | D | Tabelle &1 existiert nicht und wird daher nicht konvertiert |
120 | D | Konvertierung von Tabelle &1 |
121 | D | Für den Echtlauf muß Programm &1 im Hintergrund ausgeführt werden |
122 | D | Bitte starten Sie Program &1 für den Echtlauf im Hintergrund |
123 | D | Bitte geben Sie einen Identifizierer für den User-Exit an |
124 | D | Bei aktiviertem User-Exit muß ein Identizierer angegeben werden |
125 | D | Anzahl geprüfter Tabellenzeilen mit Ergebnisobjekt: &1 |
126 | D | Davon fehlerhaft: &1 |
127 | D | Im Quellergebnisbereich &1 ist die Profit-Center-Sicht nicht aktiv |
128 | D | Alter Ergebnisbereich: &1 |
129 | D | Neuer aktiver Ergebnisbereich: &1 |
130 | D | Start der Umsetzung: &1, &2 |
131 | D | Ende der Umsetzung: &1, &2 |
132 | D | Bitte sichern Sie zunächst die alten Customizingzuordnungen |
133 | D | Die alten Customizingzuordnungen wurden bereits gesichert |
134 | D | Es existieren keine alten Customizingzuordnungen zwischen &1 und &2 |
135 | D | Die alten Customizingzuordnungen wurden erfolgreich gelöscht |
136 | D | Für die Zuordnung &1 / &2 war nur buchhalterische Ergebnisrechnung aktiv |
137 | D | Für Ergebnisbereich &1 ist nur kalkulatorische Ergebnisrechnung aktiv |
138 | D | Ergebnisbereich &1 ist nur für kalkulatorische Ergebnisrechn. definiert |
139 | D | Bitte aktivieren Sie die Merkmalswertverprobung für Ergebnisbereich &1 |
140 | D | Die Merkmalswertverprobung für Ergebnisbereich &1 ist nicht aktiviert |
141 | D | In Tabelle &1 existiert kein Feld &2. Tabelle &3 wird nicht konvertiert |
142 | D | Tabelle &1 wurde erfolgreich angelegt |
143 | D | Tabelle &1 kann nicht in sich selbst kopiert werden |
144 | D | Feld &1 existiert bereits in Tabelle &2 |
145 | D | Tabelle &1 existiert nicht und wird daher nicht &2 |
146 | D | In Tabelle &1 existiert kein Feld &2. Tabelle &3 wird nicht &4 |
147 | D | &1 &2 hat keine Bezeichnung aus dem Kundennamensraum 'Z*' bzw. 'Y*' |
148 | D | Tabelle &1 existiert nicht und wird daher nicht &2 |
149 | D | In Tabelle &1 existiert kein Feld &2. Tabelle &3 wird nicht &4 |
150 | D | Anzahl zu verdichtender Tabellenzeilen in Tabelle &1: &2 |
151 | D | Anzahl nach Tabelle &1 kopierter Tabellenzeilen: &2 |
152 | D | Anzahl nach Tabelle &1 zurückgeschriebener Tabellenzeilen: &2 |
153 | D | Anzahl gelöschter Tabellenzeilen in Tabelle &1: &2 |
154 | D | Das Sperren des ABAP-Dictionary-Objekts von Tabelle &1 schlug fehl |
155 | D | Tabelle &1 ist im ABAP Dictionary nicht aktiv |
156 | D | Tabelle &1 wurde erfolgreich gelöscht |
157 | D | Tabelle &1 wurde nicht gelöscht, da noch Referenzen existieren |
158 | D | Beim Löschen des TADIR-Eintrags von Tabelle &1 trat ein Fehler auf |
159 | D | Tabelle &1 wird bereits durch Benutzer &2 bearbeitet |
160 | D | Beim Sperren von Tabelle &1 trat ein Fehler auf |
161 | D | Tabelle &1 wurde nicht gelöscht |
162 | D | Entwicklungsklasse &1 existiert nicht |
163 | D | Tabelle &1 wurde nicht gelöscht, da in Mandant &2 noch Daten existieren |
164 | D | Ergebnisrechnung ist nicht aktiv |
165 | D | Anzahl aktualisierter Einzelposten: &1 |
166 | D | Tabelle &1 und die CO-Summentabellen sind inkonsistent |
167 | D | Ergebnisbereich &1 und &2 haben verschiedene Geschäftsjahresvarianten |
168 | D | Tabellendefinition wurde bereits im &1 kopiert |
169 | D | Tabellendefinition wurde noch nicht im &1 kopiert |
170 | D | Daten wurden bereits im &1 kopiert |
171 | D | Daten wurden noch nicht im &1 kopiert |
172 | D | Daten wurden bereits im &1 konvertiert |
173 | D | Daten wurden noch nicht im &1 konvertiert |
174 | D | Einzelposten wurden bereits im &1 aktualisiert |
175 | D | Einzelposten wurden noch nicht im &1 aktualisiert |
176 | D | Daten wurden bereits im &1 verdichtet |
177 | D | Daten wurden noch nicht im &1 verdichtet |
178 | D | Daten wurden bereits im &1 zurückgeschrieben |
179 | D | Daten wurden noch nicht im &1 zurückgeschrieben |
180 | D | Daten wurden bereits im &1 gelöscht |
181 | D | Daten wurden noch nicht im &1 gelöscht |
182 | D | Tabellendefinition wurde bereits im &1 gelöscht |
183 | D | Tabellendefinition wurde noch nicht im &1 gelöscht |
184 | D | Tabellendefinitionen können nicht im &1 gelöscht werden |
185 | D | Tabelle &1 ist im ABAP Dictionary bereits aktiv |
186 | D | Ein Datenbankrollback wurde ausgeführt |
187 | D | Es wurden keine Statussätze gefunden |
188 | D | Es wurden keine den Selektionen entsprechenden Statussätze gefunden |
189 | D | Anzahl verdichteter Tabellenzeilen in Tabelle &1: &2 |
190 | D | Anzahl umgesetzter Zeilen in Tabelle CE4XXXX_FLAG: &1 |
191 | D | Fehler beim Einfügen von Ergebnisobjekt &1 in Tabelle &2 |
192 | D | Anzahl umgesetzter Zeilen in sekundärer Tabelle &1: &2 |
000 | E | Select different operating concerns |
001 | E | Field &1 from operating concern &2 has already been assigned |
002 | E | Fields &1 and &3 are incompatible |
003 | E | Fields &1 and &3 are incompatible |
004 | E | Make an assignment first |
005 | E | No unit of measure field exists for quantity field &1 from op.concern &2 |
006 | E | An assignment already exists or selections already exist. See long text |
007 | E | Field &1 is invalid because it does not exist in operating concern &2 |
008 | E | Inserting data records into table &1 failed |
009 | E | Assignments were posted successfully in tables &1 and &2 |
010 | E | Enter valid print parameters |
011 | E | No assignment exists for operating concerns &1 and &2 |
012 | E | Assign at least one value field or quantity field |
013 | E | Field &1 no longer exists in operating concern &2 |
014 | E | Fields &1 and &3 are incompatible |
015 | E | Errors occurred when generating a subroutine pool from program &1 |
016 | E | Field &1 does not exist in operating concern &2. See long text |
017 | E | Field &1 is missing from operating concern &2 and cannot be selected |
018 | E | Value &1 does not exist for characteristic &2. No transfer possible |
019 | E | Field &1 does not exist in operating concern &2. See long text |
020 | E | Error occurred when exporting data to the database buffer |
021 | E | Error occurred when importing data from the database buffer |
022 | E | RFC error: &1 |
023 | E | Could not open file &1 |
024 | E | File &1 could not be closed |
025 | E | Error occurred when writing data to file &1 |
026 | E | Select two different file names |
027 | E | Select at least 1000 records per package |
028 | E | Do not select more than 10 processes |
029 | E | Error occurred when deleting file &1 |
030 | E | No data was exported for operating concerns &1 and &2 |
031 | E | Error occurred when reading data from file &1 |
032 | E | Data export incomplete for operating concerns &1 and &2 |
033 | E | A data export has already been performed for operating concerns &1 and &2 |
034 | E | A data export has already been performed for operating concerns &1 and &2 |
035 | E | Tables TKECHACOAD and TKECHACOBL are inconsistent |
036 | E | Note the effects of the program. See long text |
037 | E | A data export has already been performed for operating concerns &1 and &2 |
038 | E | Data transfer from operating concern &1 to &2 |
039 | E | |
040 | E | Start of the transfer: &1, &2 |
041 | E | End of the transfer: &1, &2 |
042 | E | Transfer type: &1 |
043 | E | & & & & |
044 | E | Number of line items read: &1 |
045 | E | Processing of block &1: &2 |
046 | E | None of the logs corresponding to the selections were found |
047 | E | The characteristic values of field &1 are not checked. See long text |
048 | E | Enter a valuation date for the planning data |
049 | E | Error during deletion of data records from table &1. Deletion failed |
050 | E | &1 logs were deleted successfully |
051 | E | Enter an output file name or an error file name |
052 | E | &1 in &2: Successfully completed |
053 | E | &1 in &2: Completed with errors |
054 | E | Select at least one of the options 'Test Run' or 'Update Run' |
055 | E | Processing mode: &1 |
056 | E | The program can only be used in Release 4.5 and higher |
057 | E | Number of converted table lines: &1 |
058 | E | Enter the exact name of the old operating concern |
059 | E | Old operating concern &1: &2 |
060 | E | Start: &1 / &2 |
061 | E | End: &1 / &2 |
062 | E | Step &1: &2 |
063 | E | Data record update from table &1 failed |
064 | E | &1 status records deleted successfully |
065 | E | Program &1 is automatically executed as test run in customer systems |
066 | E | Error occurred when reading number range object COPA_OBJ / &1 |
067 | E | Controlling area: &1 |
068 | E | Maximum number range status COPA_OBJ in old operating concern &1: &2 |
069 | E | Added Safety Delta: &1 |
070 | E | New number range status COPA_OBJ in new active operating area &1: &2 |
071 | E | Table &1 already contains data. See long text |
072 | E | Table &1 does not exist |
073 | E | Number range status of COPA_OBJ / &1 is not zero. See long text |
074 | E | Profitability segments were not yet copied into &1 |
075 | E | Profitability segments were already copied into &1 |
076 | E | Number range COPA_OBJ / &1 has not yet been raised in &2 |
077 | E | Number range COPA_OBJ / &1 has already been raised in &2 |
078 | E | Profitability segments were not yet deleted in &1 |
079 | E | Profitability segments were already deleted in &1 |
080 | E | Number range status &1 to be set for COPA_OBJ / &2 is too small |
081 | E | Number of Checked Table Rows: &1 |
082 | E | Profitability segment &1 does not exist in operating concern &2 |
083 | E | Table &1 was not deleted as data still exists in client &2 |
084 | E | Table &1 is already used in a conversion. See long text |
085 | E | Fiscal year: &1 |
100 | E | Note the effects of the program. See long text |
101 | E | No profitability segment exists for this selection |
102 | E | Restrict the selection to one profitability segment |
103 | E | Old Customizing assignments have been saved successfully |
104 | E | &1 has already been converted. See long text |
105 | E | &1 have already been converted. See long text |
106 | E | &1 not yet converted successfully in test run. See long text |
107 | E | &1 not yet converted successfully in test run. See long text |
108 | E | No company code found for plant &1 |
109 | E | Company code from plant: Company code &1 and &2 are different |
110 | E | Sales organization &1 does not exist |
111 | E | Company code from sales org.: Company codes &1 and &2 are different |
112 | E | No controlling area found for company code &1 |
113 | E | Neither a company code nor a controlling area were found |
114 | E | Controlling area &1 from table and &2 from org. data are inconsistent |
115 | E | Controlling area &1: |
116 | E | Controlling area &1 is assigned but does not exist |
117 | E | Operating concern is not assigned |
118 | E | &1 is active |
119 | E | Table &1 does not exist and cannot therefore be converted |
120 | E | Conversion of table &1 |
121 | E | Program &1 must be executed in the background for the update run |
122 | E | Start program &1 in the background for the update run |
123 | E | Enter an ID for the user exit |
124 | E | An ID has to be specified for an activated user exit |
125 | E | Number of checked table lines with profitability segment: &1 |
126 | E | Of which &1 contain errors |
127 | E | The profit center view is not active in source operating concern &1 |
128 | E | Old operating concern: &1 |
129 | E | New active operating concern: &1 |
130 | E | Start of conversion: &1, &2 |
131 | E | End of conversion: &1, &2 |
132 | E | First save the old Customizing assignments |
133 | E | The old Customizing assignments have already been saved |
134 | E | None of the old Customizing assignments fall between &1 and &2 |
135 | E | The old Customizing assignments were successfully deleted |
136 | E | Only account-based prof. analysis was active for the assignment &1 / &2 |
137 | E | Only costing-based prof. analysis is active for operating concern &1 |
138 | E | Operating concern &1 is only defined for costing-based prof. analysis |
139 | E | Activate the characteristic value check for operating concern &1 |
140 | E | Characteristic value check for operating concern &1 is not activated |
141 | E | No field &2 found in table &1. Table &3 will not be converted |
142 | E | Table &1 created successfully |
143 | E | Table &1 cannot be copied into itself |
144 | E | Field &1 already exists in table &2 |
145 | E | Table &1 does not exist and will therefore not be &2 |
146 | E | No field &2 found in table &1. Table &3 will not be &4 |
147 | E | &1 &2 has no name from customer name space 'Z*' or 'Y*' |
148 | E | Table &1 does not exist and will therefore not be &2 |
149 | E | No field &2 found in table &1. Table &3 will not be &4 |
150 | E | Number of table lines in table &1 to be summarized: &2 |
151 | E | Number of table lines copied to table &1: &2 |
152 | E | Number of table lines written back to table &1: &2 |
153 | E | Number of table lines deleted in table &1: &2 |
154 | E | Locking ABAP Dictionary object of table &1 failed |
155 | E | Table &1 is not active in the ABAP Dictionary |
156 | E | Table &1 was deleted successfully |
157 | E | Table &1 was not deleted because references still exist |
158 | E | Error occurred when deleting the TADIR entry for table &1 |
159 | E | Table &1 is currently being processed by user &2 |
160 | E | Error occurred when locking table &1 |
161 | E | Table &1 was not deleted |
162 | E | Development class &1 does not exist |
163 | E | Table &1 was not deleted because data still exists in client &2 |
164 | E | Profitability analysis is not active |
165 | E | Number of updated line items: &1 |
166 | E | Table &1 and the CO totals tables are inconsistent |
167 | E | Operating concern &1 and &2 have different fiscal year variants |
168 | E | Table definition was already copied in &1 |
169 | E | Table definition has not yet been copied in &1 |
170 | E | Data was already copied in &1 |
171 | E | Data has not yet been copied in &1 |
172 | E | Data has already been converted in &1 |
173 | E | Data has not yet been converted in &1 |
174 | E | Line items have already been updated in &1 |
175 | E | Line items have not yet been updated in &1 |
176 | E | Data has already been summarized in &1 |
177 | E | Data has not yet been summarized in &1 |
178 | E | Data has already been written to &1 |
179 | E | Data has not yet been written to &1 |
180 | E | Data has already been deleted in &1 |
181 | E | Data has not yet been deleted in &1 |
182 | E | Table definition has already been deleted in &1 |
183 | E | Table definition has not yet been deleted in &1 |
184 | E | Table definitions cannot be deleted in &1 |
185 | E | Table &1 is already active in the ABAP Dictionary |
186 | E | A database rollback was performed |
187 | E | No status records were found |
188 | E | No status records were found corresponding to the selections |
189 | E | Number of Summarized Table Lines in Table &1: &2 |
190 | E | Number of Converted Lines in Table CE4XXXX_FLAG: &1 |
191 | E | Error when inserting profitability segment &1 in table &2 |
192 | E | Number of Converted Lines in Secondary Table &1: &2 |