Menu

SAP Message Class CU

Messages Varianten / Konfiguration

Recommended Now

Fire TV Stick Lite Essentials Bundle

This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.

Check it out on amazon.com →

The Message Class CU (Messages Varianten / Konfiguration) is a standard Message Class in SAP ERP and is part of the package CUMT.

Technical Information

Message Class CU
Short Text Messages Varianten / Konfiguration
Package CUMT

Messages

ID Language Text
000 D Die Beziehung & wird noch nicht verwendet
001 D Die Beziehung & ist bereits vorhanden
002 D Die Beziehung & ist nicht vorhanden
003 D Bitte eine Beziehungsart auswählen
004 D Bitte nur eine Beziehungsart auswählen
005 D Die Beziehung & wurde geändert
006 D Die Beziehung & wurde hinzugefügt
007 D Die Beziehung & wurde gelöscht
008 D Die Beziehung & wird bereits von & bearbeitet
009 D Keine Änderung der Beziehung
010 D Beziehungsbaustein ist nicht vorhanden
011 D Die Bezeichnung in der Anmeldesprache & kann nicht gelöscht werden
012 D Allgemeiner Fehler beim Sperren
013 D Interner Fehler: &1, &2, &3, &4
014 D Beziehung & ist bereits zugeordnet
015 D Bitte das Blockende markieren
016 D Bitte erst einen Eintrag makieren
018 D Fehler in der Nummernkreisverwaltung
019 D Dokumentation für Beziehung & ist in der Sprache & nicht vorhanden
020 D Mehrfachklassifikation für Beziehung & ist nicht zulässig
021 D Fehler beim Lesen der Dokumentation für Beziehung & &
022 D Fehler beim Kopieren der Dokumentation für Beziehung & &
023 D Bitte eine gültige Zeile auswählen
024 D Bitte zuerst eine Beziehungsnamen angeben
025 D Es ist noch kein Beziehungswissen vorhanden
026 D Es existiert bereits ein Eintrag für die Sprache &
027 D Die Beziehungsart & ist in diesem Umfeld nicht zulässig
028 D Interner Fehler beim Syntax-Check des Beziehungswissens
029 D Interner Fehler beim Compilieren des Beziehungswissens
030 D Pflegeberechtigung & ist in diesem Umfeld nicht zulässig
031 D Pflegeberechtigung & schließt für dieses Objekt eine Zuordnung aus
032 D Mehr als eine Verwendung vorhanden (Nur zentrale Pflege möglich)
033 D Lokale Beziehungen können nicht zentral gepflegt werden
034 D Beziehungsstatus wurde auf & gesetzt
035 D Freigabestatus bei fehlerhaftem Beziehungswissen ist nicht zulässig
036 D Freigabestatus kann ohne Beziehungswissen nicht gesetzt werden
037 D Ungültiger Beziehungsname: &
038 D Bitte den Cursor auf eine gültige Zeile positionieren
039 D Der Beziehungsname darf nicht numerisch sein
040 D Regeln und Constraints sind nur vom Beziehungsnetz aus pflegbar
041 D Beziehungsnetz hier nicht pflegbar
042 D & ist bereits dem Beziehungsnetz & zugeordnet
043 D & ist kein Beziehungsnetz
044 D Bei Beziehungsnetz nur lokale Pflege mit Namen möglich
045 D Wechseln von SCE nicht möglich, solange Zuordnungen existieren
047 D Beziehungsnetz wurde fehlerfrei generiert
048 D Beziehungart der Vorlage & passt nicht
049 D Für Änderungen zum & hier bereits Änderungsnr & benutzt
050 D Beziehung ist seit & als gelöscht gekennzeichnet
051 D Beziehung & muß mit Änderungsnummer gepflegt werden
052 D Ändern der Vergangenheit (&)
053 D Kein Änderungsdienst daher Tagesdatum (&) übernommen
054 D Neue Kompilerversion, bitte Beziehungsnetz & neu generieren
055 D Beziehung & erst ab & vorhanden
056 D Beziehung & hat Status &
057 D Beziehung & hat am & keinen ausführbaren Code
058 D Löschkennzeichen wird mit gleicher Änderungsnummer zurückgenommen
059 D Beziehungspflege dieses Objekts erfordert Änderungsnummer
060 D Beziehung & wird verwendet
061 D Gewünschte Beziehungsart unzulässig für bestimmte bestehende Zuordnungen
062 D Beziehung & wird mehrfach verwendet
063 D Netzgenerierung wurde abgebrochen, es werden keine Änderungen gesichert
064 D Fehler beim Laden des Netzes, bitte Netzgenerierung starten
065 D Beziehung & wird gerade als Beziehungsnetz gepflegt
066 D &1 für Zuordnung von Beziehungswissen nicht vorgesehen
067 D Daten für Feld &1 fehlen
068 D &1 ist &2 nicht zugeordnet, kann also nicht gelöscht werden
069 D Wert &1 für Feld &2 ungültig
070 D Dokumentation ohne Bezeichnung in Sprache &1 nicht pflegbar
071 D Wechsel der Änderungsnummer erfordert CUKD_API_INIT Aufruf
072 D &1 : Fehler/Warnungen sind aufgetreten
073 D ALLOCATION_NUMBER: &1 ALLOCATION_TABLE: &2 ECM_NUMBER: &3
074 D Neues Datum &2 unzulässig für &1, es gibt Daten für Bez. &3 zum Datum &4
075 D Neues Datum &2 unzulässig für &1, wegen Zuordn.daten von Bez. &3 zum &4
076 D Neues Datum &2 unzulässig für &1, Aenderungsnummerkonflikt mit Merkmal &3
077 D Customizing Tabelle TCUX nicht gepflegt
078 D Sie haben keine Berechtigung zur Anzeige dieser Beziehung (siehe &1)
079 D Sie haben keine Berechtigung zur Pflege dieser Beziehung (siehe &1)
080 D Die Pflegeberechtigung &1 kann nicht von der Vorlage uebernommen werden
090 D Es wurden keine Beziehungen selektiert
091 D Kompilat für Beziehungsnetz ist nicht anzeigbar
100 D Fehler beim INSERT mit RC=& in Datei & & &
101 D Fehler beim UPDATE mit RC=& in Datei & & &
102 D Fehler beim DELETE mit RC=& in Datei & & &
110 D Fehler: Externe Eingabedaten, ext. Pos: &1 Instanz: &2 Objekt: &3
111 D Eingabefehler bei Merkmal: &1 Wert: &2 Ursache: &3
112 D Fehler: Konfigurationseinstieg, ext. Pos: &1 Ursache: &4
113 D Achtung: Folgende externe Eingaben konnten nicht verarbeitet werden:
114 D INST: Inst:&1, Typ:&2, Obj:&3
115 D VAL: Inst(?):&1, Merkmal:&2, Wert:&3
116 D VAL: Inst:&1, Merkmal(?):&2, Wert:&3
117 D COND: Inst:&1, Kondition:&2, Faktor:&3
118 D PART_OF: Vater &1 (?), fuer Pos:&3, Obj:&4
119 D PART_OF: Vater &1, Sohn &2 (?) POS:&3, Obj:&4
131 D Schließen Sie zunächst den Modus des Beziehungswissens
132 D Markieren Sie eine Beziehung
134 D Positionieren Sie den Cursor auf einer Beziehung
200 D Positionsstatus ist unvollständig
201 D Status & ist nicht definiert
202 D Bitte nur einen Status auswählen
300 D Das Wissensbasisobjekt & ist bereits vorhanden
301 D Das Wissensbasisobjekt & ist nicht vorhanden
302 D Das Wissensbasisobjekt & ist erst ab & vorhanden
303 D Das Wissensbasisobjekt & wird bereits von & bearbeitet
304 D Sie können die Pflegeberechtigung &1 nicht vergeben
305 D Sie haben keine Berechtigung zur Pflege von &1 &2
306 D Sie dürfen nicht die Pflegeberechtigung &1 vergeben
307 D Wissensbasisobjekt & gesichert.
308 D Download der Wissensbasis & durchgeführt
309 D Download nicht möglich: Wissensbasis ist nicht freigegeben.
310 D Sprachschlüssel & nicht vorhanden (Bitte Eingabe überprüfen)
311 D Bitte Bezeichnung für Sprache & pflegen.
312 D Bitte Sprachschlüssel für Bezeichnung & angeben.
313 D Für den Sprachschlüssel & gibt es bereits einen Eintrag.
314 D Die Bezeichnung in der Log-In Sprache darf nicht gelöscht werden
319 D Beziehungsnetz &1 besitzt Folgestand mit Änderungsnummer &2 ( &3)
320 D Profilname für Bezeichnung & fehlt
321 D Bezeichnung für Profil & fehlt
322 D Der Profilname & ist bereits vergeben
323 D Bitte die Klassenart zur Klasse & angeben
324 D Bitte Eintrag & für Material vorher löschen
325 D Bitte die OO-Klasse für das Profil & angeben
326 D Die Klasse &1 existiert nicht in der Klassenart &2
327 D Bitte mindestens ein Profil zur Wissensbasis & pflegen
330 D Aufgabenname für Bezeichnung & fehlt
331 D Bezeichnung für Aufgabe & fehlt
332 D Der Aufgabenname & ist bereits vergeben
335 D SCE-Modus nicht aktiv. Pflege von Aufgaben und Ereignissen nicht erlaubt.
340 D Ereignisname für Bezeichnung & fehlt
341 D Bezeichnung für Ereignis & fehlt
342 D Der Ereignisname & ist bereits vergeben
345 D Für die Klasse &1 gibt es in der Sprache &2 keine Bezeichnung
346 D Für das Material &1 gibt es in der Sprache &2 keine Bezeichnung
347 D Die Reihenfolge der Vorgängerklassen ist nicht eindeutig
350 D Pfadname & enthält Leerzeichen - bitte stattdessen MS-DOS Namen benutzen
355 D KNUM wird in CUOB zugwiesen, fehlt aber in der CUKB (Netz: &)
356 D Prozedur/Aktion &1 an &2 im SCE nicht unterstützt
359 D Variantentabelle &1 zum Datum &2 nicht vorhanden
360 D Variantentabelle &1 enthält leere Zellen in Spalte &2
361 D Sprachabhängige Bezeichnung in &1 fehlt für Variantentabelle &2
364 D Sprachabhängige Bezeichnung in &1 fehlt für Merkmal &2 (bzw. Werte dazu)
365 D Merkmal &1 an &2 hat bereits einen Wert in anderer Klassenart als &3
366 D Merkmal & ist keiner Klasse zugeordnet und wird in Beziehung benutzt
367 D Merkmal & in Klasse & mit benutzerdef. Datentyp
370 D Version &1 für &2 ist bereits vorhanden
371 D Version &1 für &2 ist nicht vorhanden
372 D Die Wissenbasis &1 in der Version &2 wird gerade von &3 bearbeitet
373 D Das Wissensbasisobjekt & ist nicht freigegeben
375 D Sie haben keine Berechtigung zum Anzeigen (und Exportieren) von &1 &2
376 D Version &1 für &2 wird noch verwendet
377 D Version &1 für &2 gesichert
378 D Es wurden keine Änderungen zum letzten Build durchgeführt
379 D Version &1 für &2 gelöscht
380 D Generierung fehlerfrei beendet
381 D Generierung mit Warnungen beendet
382 D Generierung fehlerhaft
383 D Version &1 für &2 mit Warnungen gesichert
384 D UDEF Merkmale wurden Klasse (&1) &2 gelöscht
385 D & kann nicht umbenannt werden, da bereits eine Runtime-Version existiert
386 D & kann nicht gelöscht werden, da bereits eine Runtime-Version existiert
387 D SCREEN_DEP-&1 nicht untersützt, Merkmal &2 in Beziehung &3, &4
388 D Generierung für SCREEN_DEP: Beziehung &1, &2, Facette &3
389 D & konnte nicht exportiert werden
390 D Die exportierten Dateien für die Wissensbasis & wurden nicht gelöscht
391 D & konnte nicht in die Datenbank geladen werden
392 D Benutzer &1 konnte SCE Datenbankschema nicht in Datensource &2 anlegen
393 D Fehler in Objektmerkmal &1 wegen Ursache &2 (-> siehe Langtext)
394 D Kein Merkmal für Variantenkonditionen vorhanden
395 D Ungültiger Eintrag im Wertebereich von Merkmal &1
400 D Interner Fehler: &1 &2 &3 &4
401 D Material &1 hat keine Stückliste (Appl &2, Werk &3, SY-SUBRC &4)
402 D POS_NR (&1) in Stückliste von (&2) undefiniert
403 D POS_TYPE (&1) in Stückliste (&2) undefiniert
404 D POS_MENGE für &1 in Stückliste von &2 ist größer als 32767
405 D Klasse &1 kann keine Stückliste haben
410 D Merkmal &1 ist keiner Klasse zugeordnet
411 D Kein Konfig.profil für Material &1 vorhanden (Appl &2, Klassenart &3)
412 D Variantentabelle &1 in Beziehung &2 nicht freigegeben
419 D Aufruf von &2 scheitert mit &1 für die Argumente &3 &4
420 D Die Datenbank &1 ist nicht installiert bzw. nicht im Pfad eingetragen
425 D Bitte Datensource, Benutzer und Kennwort eingeben
430 D & gelöscht
435 D Kompilation von Beziehungsnetz &1
436 D Klasse (&2)&1
437 D Klasse (&2)&1 - Merkmal &3
438 D Material &1 - Konfig.profil &2 (&3, &4)
439 D Constraintnetz &1 - Constraint &2
440 D Regelnetz &1 - Regel &2
442 D Variantentabelle &1 - Spalte &2
443 D Merkmal &2
444 D Merkm. &2 - Wert &3
445 D &1 Position &2
505 D Beginn der Verarbeitung von Beziehungswissen &1 &2
600 D Beziehung nicht gefunden: &1 &2 &3 &4
601 D Beziehung nicht freigegeben: &1 &2 &3 &4
602 D Quelltext von Beziehung nicht gefunden: &1 &2 &3 &4
603 D Fehler in Quelltext einer Beziehung: &1 &2 &3 &4
604 D Fehler in Einzelbeziehung: &1 &2 &3 &4
607 D Fehler in Beziehungsnetz: &1 &2 &3 &4
610 D Beziehungskode veraltet: &1 &2 &3 &4
650 D *** messages for config data maintanance via API
651 D Es existiert keine Bezeichnung zum Beziehungswissen & (intern: &)
652 D Es existiert kein Quelltext zum Beziehungswissen & (intern: &)
653 D Es existiert keine Dokumentation zum Beziehungswissen & (intern: &)
654 D Es existiert keine Beziehung mit dem Namen & (intern: &)
700 D Es gibt keine konfigurierbaren Objekte
701 D KonfigurationsProfil für Material & ist noch nicht angelegt
702 D KonfigurationsProfil für Material & ist bereits angelegt
703 D Material & ist noch nicht angelegt
704 D Material & ist nicht für Variantenkonfiguration vorgesehen
705 D Es gibt kein weiteres konfigurierbares Objekt
706 D Klasse & & ist nicht vorhanden
707 D Klasse & & ist nicht aktiv
708 D Klasse & & ist nicht gültig
710 D Bitte einen Profilnamen angeben
711 D Bitte geben Sie einen anderen Profilnamen an
714 D Bitte nur ein Profil markieren
715 D Das Profil & zum Material & wird noch verwendet
716 D Datum & wurde aus Änderungsnummer übernommen
717 D Gültig-ab-Datum liegt in der Vergangenheit
718 D Die Angabe einer Änderungsnummer ist erforderlich
719 D Sie haben für Objekte der Klassenart & keine Berechtigung.
720 D Bitte unter den konfigurierten Objekten auswählen
721 D Klassenart & ist nicht vorhanden
722 D Klassenart & ist nicht für Variantenkonfiguration vorgesehen
723 D Bitte geben sie eine Klassenart an
725 D Klassenart & ist nicht angelegt
726 D & ist das erste zur Bearbeitung markierte Profil
728 D Es wurde keine weiteres Profil zur Bearbeitung markiert
729 D Bitte ein Profil auswählen
730 D Bitte ein Profil markieren
731 D Klassenart & kann für Materialien nicht verwendet werden
733 D Status & ist für Materialien nicht vorgesehen
735 D Klassenart & kann für IH-Anleitung nicht verwendet werden
736 D Status & ist für Standardnetze nicht vorgesehen
737 D Keine Konfigurationsprofile zur Änderungsnummer & vorhanden
738 D Profil & zum Standardnetz & & wegen Verwendung nicht löschbar
739 D Bitte geben Sie eine Stücklistenanwendung an
740 D Das Konfigurationsprofil zum Material & wird angelegt
741 D Das Konfigurationsprofil zum Material & wird geändert
742 D Das Konfigurationsprofil zum Material & wurde nicht verändert
743 D Das Konfigurationsprofil zum Standardnetz & & wird angelegt
744 D Das Konfigurationsprofil zum Standardnetz & & wird geändert
745 D Das Konfigurationsprofil zum Standardnetz & & wurde nicht verändert
746 D Änderungsnummer & ist nicht vorhanden
747 D Änderungen mit Datum & sind nur mit Änderungsnummer & zulässig
748 D Änderungsnummer & erlaubt keine Änderungen im Beziehungswissen
749 D Beziehungswissen ist ohne Inhalt
750 D Es gibt keine konfigurierten Objekte zum Material &
751 D Es gibt keine konfigurierten Objekte zum Standardnetz & &
752 D Konfigurationsprofil zum Material & ist am & nicht gültig
753 D Konfigurationsprofil zum Standardnetz & & ist am & nicht gültig
754 D Klasse & & wurde zum konfigurierbaren Material gesetzt
755 D Keine Änderungsnummer zum Material & vorhanden
756 D Keine Änderungsnummer zum Standardnetz & & vorhanden
757 D Zum Profil & sind bereits Kundenauftragsstücklisten erfaßt
759 D & ist nicht als konfigurierbares Objekt definiert
760 D Die maximale Anzahl Alternativ-Modi ist bereits erreicht
761 D Sie haben keine Berechtigung für die verwendeten Klassenarten
762 D Anwendungssicht & ist für Klassenart & nicht vorgesehen
763 D Freigabe für Profil & wird zurückgenommen
764 D Profilname & wird schon an anderer Stelle verwendet
765 D Freigabe erst möglich, wenn eine Klasse der Klassenart & zugeordnet ist
766 D Datumsverschiebung bei Material & Profil & nicht zulässig
767 D Datumsverschiebung bei Standardnetz & & Profil & nicht zulässig
768 D Bitte pflegen Sie zunächst die Stücklistenanwendung
769 D Sie haben keine Berechtigung für eine Variantenklassenart
770 D Das Konfigurationsprofil zum Standardnetz & & ist noch nicht angelegt
771 D Das Konfigurationsprofil für Standardnetz & & ist schon angelegt
772 D Sie haben keine Berechtigung für das Standardnetz & &
773 D Standardnetz & Alternative & ist noch nicht vorhanden
774 D Das Standardnetz & ist von Benutzer & gesperrt
775 D Das Standardnetz kann aus Systemgründen derzeit nicht gesperrt werden
776 D Sie haben keine Berechtigung zur Auswahl eines Profils der Klassenart &1
780 D Konfigurationsprofil zum Material & wurde schon verarbeitet
781 D Konfigurationsprofil zum Standardnetz & & wurde schon verarbeitet
790 D Konfigurierte Objekte - Einstellung 'Kundenauftrag' nicht änderbar
791 D Konfigurierte Objekte - Einstellung 'Kundenauftrag' nicht erlaubt
792 D Mehrstufig konfigurierte Objekte - Einstellung mehrstufig nicht änderbar
793 D Konfigurierte Objekte - die Einstellung ist evtl. nicht änderbar
794 D Konfigurierte Obj. - Einstellung 'Kundenauftrag mehrst.' nicht änderbar
795 D Einstufig konfigurierte Objekte - Einstellung 'keine' nicht erlaubt
799 D & & & &
803 D Klassenart & kann für IH-Anleitungen nicht verwendet werden
804 D Die IH-Anleitung & ist von Benutzer & gesperrt
805 D Status & ist für IH-Anleitungen nicht vorgesehen
806 D IH-Anleitung & Alternative & ist noch nicht vorhanden
807 D Das Konfigurationsprofil zur IH-Anleitung & & ist noch nicht angelegt
808 D Sie haben keine Berechtigung für die IH-Anleitung & &
809 D Keine Änderungsnummer zur IH-Anleitung & & vorhanden
810 D Datumsverschiebung bei IH-Anleitung & & Profil & nicht zulässig
811 D KonfigurationsProfil zur IH-Anleitung & & ist am & nicht gültig
812 D Die IH-Anleitung kann aus Systemgründen derzeit nicht gesperrt werden
813 D Das Konfigurationsprofil für IH-Anleitung & & ist schon angelegt
814 D Es gibt keine konfigurierten Objekte zur IH-Anleitung & &
815 D Profil & zur IH-Anleitung & & wegen Verwendung nicht löschbar
816 D Das Konfigurationsprofil zur IH-Anleitung & & wird angelegt
817 D Das Konfigurationsprofil zur IH-Anleitung & & wird geändert
818 D Das Konfigurationsprofil zur IH-Anleitung & & wurde nicht verändert
819 D & & & &
820 D Konfigurationsprofil zur IH-Anleitung & & wurde schon verarbeitet
823 D Klassenart & kann für Muster-LV nicht verwendet werden
824 D Das Muster-LV & ist von Benutzer & gesperrt
825 D Status & ist für Muster-LV nicht vorgesehen
826 D Muster-LV & ist noch nicht vorhanden
827 D Das Konfigurationsprofil zum Muster-LV & ist noch nicht angelegt
828 D Sie haben keine Berechtigung für das Muster-LV &
829 D Keine Änderungsnummer zum Muster-LV & vorhanden
830 D Datumsverschiebung bei Muster-LV & Profil & nicht zulässig
831 D KonfigurationsProfil zum Muster-LV & ist am & nicht gültig
832 D Das Muster-LV kann aus Systemgründen derzeit nicht gesperrt werden
833 D Das Konfigurationsprofil für Muster-LV & ist schon angelegt
834 D Es gibt keine konfigurierten Objekte zum Muster-LV &
835 D Profil & zum Muster-LV & wegen Verwendung nicht löschbar
836 D Das Konfigurationsprofil zum Muster-LV & wird angelegt
837 D Das Konfigurationsprofil zum Muster-LV & wird geändert
838 D Das Konfigurationsprofil zum Muster-LV & wurde nicht verändert
840 D Konfigurationsprofil zum Muster-LV & wurde schon verarbeitet
850 D ** Configurator API messages
851 D Lesen der Merkmale zur Instanz &
860 D Einstellung Auftragsstückliste und Kundenauftrag nicht erlaubt
861 D Überprüfen Sie die Einstellungen zur Auftragsstückliste
862 D Auftragsstückliste nicht erlaubt, wenn keine Stücklistenauflösung
863 D Kundenauftrag nicht erlaubt, wenn keine Stücklistenauflösung
865 D Überprüfen Sie die Einstellungen zum Kundenauftrag
868 D Keine Pflege möglich! Kundenauftrag ist nicht markiert
869 D Keine Pflege möglich! Auftragsstückliste ist nicht markiert
870 D Start mit 'Konfig.-Struktur' nicht möglich. Markierung erforderlich
871 D Start mit 'Ergebnis' nicht möglich! Markierung erforderlich
872 D Start mit 'Stammdaten' nicht möglich! Markierung erforderlich
873 D Design & wird bereits bei Objekten mit anderer Klassenzuordnung verwendet
874 D Alternative Sprache existiert nicht
875 D Status & existiert nicht für Konfigurationsprofile zum Objekt &
878 D Konfig.-Struktur bei Einstellung Konfig.-Browser nicht erlaubt
882 D Konfig.-Struktur nicht möglich, da Konfig.-Browser gesetzt ist
884 D Fehler beim Prüfen bzw. Löschen des Oberflächendesigns
885 D Oberflächendesign wird von Vorlagematerial &2 übernommen
886 D Oberflächendesign wird nicht von Vorlagematerial &2 übernommen
887 D Pflege im Kundenauftrag ist nur bei ergebnisorientierter Ablage erlaubt
890 D Konfigurierte Objekte! Beim Verschieben sind Inkonsistenzen möglich
000 E Dependency & has not yet been used
001 E Dependency & already exists
002 E Dependency & does not exist
003 E Please select a dependency type
004 E You can only select one dependency type
005 E Dependency & has been changed
006 E Dependency & has been created
007 E Dependency & has been deleted
008 E Dependency & is already being processed by &
009 E Dependency was not changed
010 E Dependency does not exist
011 E The description in logon language & cannot be deleted
012 E General locking error
013 E Internal error: &1, &2, &3, &4
014 E Dependency & already assigned
015 E Select the end of the block
016 E Please select an entry first
017 E Indicate where you want the entries to be inserted
018 E Number range error
019 E Documentation for dependency & not available in language &
020 E Multiple classification not allowed for dependency &
021 E Error reading documentation for dependency & &
022 E Error copying documentation for dependency & &
023 E Select a valid line
024 E Please enter a dependency name first
025 E No object dependencies exist for this object
026 E There is already an entry in language &
027 E Dependency type & not allowed for this object
028 E Internal error in syntax check for object dependency
029 E Internal error compiling object dependencies
030 E Maintenance authorization & not allowed for this object
031 E Maintenance authorization & does not allow assignments to this object
032 E Used more than once - can only be maintained centrally
033 E Local dependencies cannot be maintained centrally
034 E Dependency status has been set to &
035 E Released status not allowed if the source code contains errors
036 E You cannot set status 'released' without object dependencies
037 E Invalid dependency name: &
038 E Position the cursor on a valid line item
039 E The dependency name cannot be numeric
040 E Rules and constraints can only be maintained from the dependency net
041 E Dependency net cannot be maintained here
042 E & is already assigned to dependency net &
043 E & is not a dependency net
044 E Dependency net can only be maintained locally with name
045 E You cannot change from SCE while assignments exist
046 E You need not regenerate dependency network
047 E Dependency net was generated successfully
048 E Dependency type of & is not suitable
049 E Changes already made on & with change number &
050 E Dependency marked for deletion since &
051 E Dependency & must be processed with a change number
052 E Change in past (&)
053 E No engineering change management, therefore current date (&) taken
054 E New compiler version, please regenerate dependency net &
055 E Dependency & does not exist until &
056 E Dependency & has status &
057 E Dependency & has no executable code on &
058 E Deletion indicator removed with same change number
059 E Change number required when maintaining dependencies for this object
060 E Dependency & is in use
061 E Dependency type not allowed for certain existing assignments
062 E Dependency & used more than once
063 E Net generation terminated - no changes were saved
064 E Error loading net - please start net generation
065 E Dependency & already maintained as dependency net
066 E You cannot assign object dependencies to &1
067 E Data missing for field &1
068 E &1 is not assigned to &2 so cannot be deleted
069 E Value &1 not valid for field &2
070 E Documentation cannot be maintained without description in language &1
071 E Change of change number requires CUKD_API_INIT call
072 E &1: error/warning messages
073 E ALLOCATION_NUMBER: &1 ALLOCATION_TABLE: &2 ECM_NUMBER: &3
074 E New date &2 not allowed for &1 - data exists for dep. &3 on &4
075 E New date &2 not allowed for &1 - assignment data exists for dep. &3 on &4
076 E New date &2 not allowed for &1 - change number conflict with char. &3
077 E Customizing table TCUX not maintained
078 E You are not authorized to display this dependency (see &1)
079 E You are not authorized to maintain this dependency (see &1)
080 E Maintenance authorization &1 cannot be copied from the source
090 E No dependencies were selected
091 E Compilation for dependency net cannot be displayed
100 E INSERT error with RC-& in file & & &
101 E UPDATE error with RC-& in file & & &
102 E DELETE error with RC-& in file & & &
104 E Functions cannot be placed in the menu bar
105 E Recursive menu definitions are not possible
106 E Nesting is too deep
107 E Cannot perform any more inserts
108 E No inserts allowed with funciton key setting
109 E No menu can be assigned to a function key
110 E Error with ext. input data: ext. item &1, inst. &2, object &3
111 E Input error with char. &1, value &2, cause: &3
112 E Error: initial confign screen, ext. item: &1, cause: &4
113 E Caution: the following external input could not be processed:
114 E INST: Inst:&1, Type:&2, Object:&3
115 E VAL: Inst(?):&1, Characteristic:&2, Value:&3
116 E VAL: inst. &1, char.(?) &2, value &3
117 E COND: inst: &1, condition: &2, factor: &3
118 E PART_OF: parent &1 (?), for item &3, obj. &4
119 E PART_OF: parent &1, child &2 (?), item &3, obj. &4
120 E Please choose a menu bar
122 E Please choose a menu
123 E Please choose a function
124 E Please choose a function key setting
125 E Please choose a pushbutton setting
126 E Function code $ is not supported in reports
127 E Please specify a function code
128 E Selected menu is nested too deeply
129 E All menus $ are nested too deeply
130 E Menu type 'I' can be used only in the menu bar
131 E End the dependency session first
132 E Select a Dependency
133 E Include menus (type 'I') are allowed only in the menu bar
134 E Place the cursor on a dependency
135 E Menu $ contains entries. An Include menu cannot contain entries
136 E You have not selected a menu
137 E Interface has been saved and generated
138 E No errors found in the fast path
139 E Function code $ does not exist
140 E Function code $ already exists
141 E Function code $ has been renamed as $
142 E Please specify the old and the new function code
143 E System functions cannot be selected
144 E System functions cannot be overwritten
145 E Text changed in $
146 E Include menus can be used only in the menu bar
148 E Function key $ should not be assigned to the first pushbutton
149 E No errors found in the pushbutton settings
150 E Function codes are not permitted in the form <xx>
151 E No errors in the texts
152 E Special characters '<' and '>' are not permitted in texts
154 E Menus conform to the standards
155 E The distribution of functions conforms to the standards
156 E You have already chosen a function. Please copy it.
157 E The function you have chosen does not belong to the menu bar
159 E The value $ is not allowed in the menu bar
160 E Please enter a letter contained in the word
161 E Status $ has been deleted
162 E Status $ has been renamed as $
163 E Status $ already exists
164 E Status $ does not exist, but can be created
165 E Status $ has been copied to $
166 E Choose a menu (select with 'X' or press F2)
167 E The menu you selected contains errors (possibly recursive definitions)
168 E The GUI interface has no syntax errors and conforms to the standards
170 E Status $ of program $ does not exist
171 E Separator lines can be inserted only in menus
172 E Specify a number for the function key
174 E Titles of interface $ have been saved
177 E No syntax errors found
178 E Function key $ is set by the system
179 E Function 'Choose' not supported here
180 E Text for function key $ cannot be changed
181 E Function type N is used several times
182 E Fast path $ is not in the text $
184 E Function $ $ has been deleted from all menus and function keys
185 E Menu $ has been deleted from all menu bars and menus
186 E Function $ $ has been deleted, it was not in use anywhere
187 E Menu $ has been deleted, it was not in use anywhere
189 E Display mode: Interface of program $ is already in use
193 E Status $ does not exist
194 E Window size specifications are taken into accoutn only with modal status
195 E You must specify the window size with modal status
196 E Status $ of program $ has not been created
197 E Include attributes can be maintained only for include menus
199 E Specify one status type only
200 E Item status is incomplete
201 E Status & is not defined
202 E Please select one status only
203 E All menu bars are used in at least one status
204 E All unused menu bars have been deleted
205 E Selected menu bar has been deleted
206 E All function key settings are in use
207 E All unused function keys and pushbuttons have been deleted
208 E Selected function keys and pushbuttons have been deleted
209 E All pushbutton settings are in use
210 E All unused pushbutton settings have been deleted
211 E Selected pushbutton setting has been deleted
212 E All function are in use
213 E All unused functions have been deleted
214 E Selected function has been deleted
215 E All menus are in use
216 E All unused menus have been deleted
217 E Selected menu has been deleted
218 E Standard functions cannot be activated without a function code
219 E Please do not set the ENTER key in online screens
220 E Choose a status for printing
222 E All functions of the status $ in program $ have been activated
223 E No status has been created for program $
224 E No titles have yet been created for the program $
225 E Interface $ cannot be generated due to syntax errors
226 E Functions cannot be deactivated in this part of the list
227 E Selected object cannot be deleted
228 E Selected menu bar has been deleted with references
229 E Selected funciton key setting has been deleted with references
230 E Selected pushbutton setting has been deleted with references
231 E Function codes beginning with '+' are modifiable
232 E No match found for $
233 E Pushbuttons can only be moved
263 E Please specify a function code and a name
264 E Program $ does not exist
266 E $ is not an SAP menu
267 E SAP menu $ does not exist
268 E Menu text space is not allowed
269 E Title $ already exists
270 E Screen $ of the program $ does not exist
271 E Screen $ of the program $ contains errors (standard screen)
272 E Title $ does not exist
273 E No titles exist for program $
274 E Use the cursor to specify the destination
275 E Please choose only one option
276 E Please choose a menu bar
277 E Area menu $ has been saved
278 E Area menu $ has been saved and generated
300 E Knowledge-base object & already exists
301 E Knowledge-base object & does not yet exist
302 E Knowledge-base object & does not exist until &
303 E Knowledge-base object & is being processed by &
304 E You cannot assign maintenance authorization &1
305 E You are not authorized to maintain &1 &2
306 E You cannot assign maintenance authorization &1
307 E Knowledge-base object & saved
308 E Knowledge base & downloaded
309 E Download not possible: knowledge base is not released
310 E Language key & not defined (check your entry)
311 E Enter a description in language &
312 E Enter a language key for description &
313 E An entry already exists for language key &
314 E You cannot delete the description in the logon language
315 E Function has not been executed
316 E SAP menu $ has not yet been created
317 E $ is already defined as a transaction
318 E Status $ of interface $ has already been created
319 E Dependency net &1 has subsequent status with change number &2 (&3)
320 E Profile name missing for description &
321 E Description missing for profile &
322 E Profile name & has already been assigned
323 E Enter the class type of class &
324 E Delete entry & for material first
325 E Enter OO class for profile &
326 E Class &1 does not exist in class type &2
327 E Enter at least one profile for knowledge base &
329 E Title $ does not exist
330 E Task name missing for description &
331 E Description missing for task &
332 E Task name & has already been assigned
335 E SCE mode not active - maintenance of tasks and events not allowed
340 E Event name missing for description &
341 E Description missing for event &
342 E Event name & has already been assigned
345 E Class &1 has no description in language &2
346 E Material &1 has no description in language &2
347 E The sequence of superior classes is ambiguous
350 E Path name & contains blanks - use MS-DOS name instead
355 E KNUM is assigned in CUOB but missing in CUKB (net: &)
356 E Procedure/action &1 for &2 not suppoerted in the SCE
359 E Variant table &1 does not exist on date &2
360 E Variant table &1 contains blanks in column &2
361 E Variant table &2 has no language-dependent description in &1
364 E Characteristic &2 (or its values) has no description in &1
365 E Characteristic &1 for &2 has a value in a class type other than &3
366 E Characteristic & is not assigned to a class and is used in dependencies
367 E Characteristic & in class & with user-defined data type
370 E Version &1 of &2 already exists
371 E Version &1 of &2 does not exist
372 E Knowledge base &1, version &2 is being processed by &3
373 E Knowledge-base object & is not released
375 E You are not authorized to display (or export) &1 &2
376 E Version &1 for &2 is still in use
377 E Version &1 of &2 saved
378 E No changes have been made since the last build
379 E Version &1 of &2 deleted
380 E Generation completed successfully
381 E Generation completed with warning messages
382 E Generation error
383 E Version &1 for &2 saved with warning messages
384 E UDEF characteristics were deleted for class (&1) &2
385 E & cannot be renamed because a runtime version exists
386 E & cannot be deleted, because a runtime version exists
387 E SCREEN_DEP-&1 not supported, characteristic &2 in dependency &3, &4
388 E Generation for SCREEN_DEP: dependency &1, &2, facet &3
389 E & could not be exported
390 E Exported files for knowledge base & were not deleted
391 E & could not be loaded to the database
392 E User &1 could not create SCE database schema in data source &2
393 E Error in reference characteristic &1 due to cause &2 (-> see long text)
394 E No characteristic found for variant conditions
395 E Invalid entry in allowed values for characteristic &1
400 E Internal error: &1 &2 &3 &4
401 E Material &1 has no BOM (BOM application &2, plant &3, SY-SUBRC &4)
402 E POS_NR (&1) in BOM of (&2) not defined
403 E POS_TYPE (&1) in BOM of (&2) not defined
404 E POS_MENGE for &1 in BOM of &2 is greater than 32767
405 E Class & cannot have a BOM
410 E Characteristic &1 is not assigned to a class
411 E No config. profile exists for material &1 (appl. &2, class type &3)
412 E Variant table &1 is not released in dependency &2
413 E Status $ of program $ has been deleted
415 E Status $ of program $ has been copied under the name $
416 E No status has yet been created
419 E Call &2 failed with &1 for arguments &3 &4
420 E Database &1 is not installed or not in this path
425 E Enter data source, user, and password
427 E Program $ has not yet been created
429 E Only maintenance is possible with status short texts
430 E & deleted
431 E Specify a status
432 E Choose a status
433 E Program $ has type $
434 E Interface $ already exists
435 E Compilation of dependency net &1
436 E Class (&2)&1
437 E Class (&2)&1 - characteristic &3
438 E Material &1 - configuration profile &2 (&3, &4)
439 E Constraint net &1 - constraint &2
440 E Rule net &1 - rule &2
442 E Variant table &1 - column &2
443 E Characteristic &2
444 E Characteristic &2 - value &3
445 E &1 item &2
505 E Start of processing for dependency &1 &2
600 E Dependency not found: &1 &2 &3 &4
601 E Dependency not released: &1 &2 &3 &4
602 E Source code of dependency not found: &1 &2 &3 &4
603 E Error in source code of dependency: &1 &2 &3 &4
604 E Error in single dependency: &1 &2 &3 &4
607 E Error in dependency net: &1 &2 &3 &4
610 E Dependency code outdated: &1 &2 &3 &4
650 E *** Messages for Config Data Maintanance via API
651 E No description exists for dependency & (internal: &)
652 E No source code exists for dependency & (internal: &)
653 E No documentation exists for dependency & (internal: &)
654 E No dependency exists with the name & (internal: &)
700 E There are no configurable objects
701 E Configuration profile for material & not yet created
702 E Configuration profile for material & already created
703 E Material & has not yet been created
704 E Material & is not defined for variant configuration
705 E There are no other configurable objects
706 E Class & & does not exist
707 E Class & & is not active
708 E Class & & is not valid
710 E Enter a profile name
711 E Enter a different profile name
714 E Please select one profile only
715 E Profile & for material & is in use
716 E Date & copied from change number
717 E Valid-from date is in the past
718 E Please enter a change number
719 E You are not authorized for objects of class type &
720 E Please select one of the configurable objects
721 E Class type & not defined
722 E Class type & is not defined for variant configuration
723 E Please enter a class type
725 E Class type & not created
726 E & is the first profile selected for processing
728 E No more profiles were selected for processing
729 E Please select a profile
730 E Please select a profile
731 E Class type & cannot be used for materials
733 E Status & is not defined for materials
735 E Class type & cannot be used for general maintenance task lists
736 E Status & not supported for standard networks
737 E No configuration profiles exist for change number &
738 E Profile & for std network & & is in use and cannot be deleted
739 E Please enter a BOM application
740 E Configuration profile for material & created
741 E Configuration profile for material & changed
742 E No changes were made to configuration profile for material &
743 E Configuration profile for standard network & & created
744 E Configuration profile for standard network & & changed
745 E No changes were made to configuration profile for standard network & &
746 E Change number & does not exist
747 E Changes on & only allowed with change number &
748 E Change number & does not allow changes to object dependencies
749 E Object dependency has no content
750 E There are no configured objects for material &
751 E No configured objects exist for standard network & &
752 E Configuration profile for material & not valid on &
753 E Configuration profile for standard network & & not valid on &
754 E Class & & set for configurable material
755 E No change number found for material &
756 E No change number found for standard network & &
757 E Order BOMs already created for profile &
758 E Please check your settings for the BOM explosion result
759 E & not defined as a configurable object
760 E The maximum number of alternative sessions has been reached
761 E You are not authorized for these class types
762 E Organizational area & not defined for class type &
763 E Released status for profile & withdrawn
764 E Profile name & already used elsewhere
765 E You cannot release the profile until you assign a class of class type &
766 E Date shift not allowed for material & profile &
767 E Date shift not allowed for standard network & & profile &
768 E Please enter the BOM application first
769 E You have no authorization for variant class types
770 E Configuration profile for standard network & & not yet created
771 E Configuration profile for standard network & & already created
772 E You have no authorization for standard network & &
773 E Standard network & alternative & does not yet exist
774 E Standard network & locked by user &
775 E Standard network cannot be locked for technical reasons
776 E You do not have authorization to choose a profile with class type &1
780 E Configuration profile for material & has already been processed
781 E Configuration profile for standard network & & has already been processed
790 E Configured objects - you cannot change the setting 'sales order'
791 E Configured objects - you cannot select 'sales order'
792 E Multilevel configured objects - You cannot change 'multilevel' setting
793 E Configured objects - you may no longer be able to change the setting
794 E Configured objects - you cannot change 'Sales order multilevel' setting
795 E Single-level configured objects - you cannot select 'None'
799 E & & & &
803 E Class type & cannot be used for general maintenance task lists
804 E General maintenance task list & is locked by user &
805 E Status & not defined for general maintenance task lists
806 E General maintenance task list & does not yet exist
807 E Confign profile for general maintenance task list & & not yet created
808 E You have no authorization for gen. maintenance task list & &
809 E No change numbers found for general maintenance task list & &
810 E Date shift not allowed for general maintenance task list & & profile &
811 E Configuration profile for GM task list & & is not valid on &
812 E The general maintenance task list cannot be locked
813 E Configuration profile already exists for for GM task list & &
814 E There are no configured objects for GM task list & &
815 E Profile & for general task list & & is in use and cannot be deleted
816 E Configuration profile created for general maintenance task list & &
817 E Configuration profile for general maintenance task list & & changed
818 E No changes were made to configuration profile for general task list & &
819 E & & & &
820 E Configuration profile for general task list & & has been processed
823 E Class type & cannot be used for model service specifications
824 E Model service specification & locked by user &
825 E Status & is not defined for model service specifications
826 E Model service specification & does not exist
827 E Configuration profile for model service spec. & not yet created
828 E You have no authorization for model service spec. &
829 E No change numbers found for model service specification &
830 E Date shift not allowed for model service specification & profile &
831 E Configuration profile for model service specification & not valid on &
832 E Model service specification cannot currently be locked due to the system
833 E Configuration profile for model service specification & already created
834 E No configured objects exist for model service specification &
835 E Profile & for model service spec. & is in use and cannot be deleted
836 E Creating configuration profile for model service specification &
837 E Changing configuration profile for model service specification &
838 E Configuration profile for model service specification & was not changed
840 E Configuration profile for model service spec. & already being processed
850 E ** Configurator API Messages
851 E Read characteristics of instance &
860 E Order BOM and sales order settings not allowed
861 E Check your settings for the order BOM
862 E Order BOM not allowed if no BOM explosion
863 E Sales order not allowed if no BOM explosion
865 E Check your settings for the sales order
868 E Maintenance not possible, because sales order is not selected
869 E Maintenance not possible, because order BOM is not selected
870 E Start with 'Configuration structure' not possible: select first
871 E Start with 'Result' not possible: select first
872 E Start with 'Master data' not possible: select first
873 E Design & already used in objects assigned to other classes
874 E Alternative language not defined
875 E Status & not defined for configuration profiles for object &
878 E Configuration structure screen not allowed for confign browser setting
882 E Configuration structure not allowed, because 'Confign browser' is set
884 E Error checking or deleting interface design
885 E Interface design copied from material &2
886 E Interface design not copied from material &2
887 E Maintenance in sales order is only allowed for result-oriented order BOMs
890 E Configured objects: moving may cause inconsistencies
989 E Entry in & does not exist!
990 E Display call characteristics
991 E Display call characteristic values
992 E Display call database fields
993 E Display call formulae
998 E No errors found
999 E Internal error $$$$