Menu

SAP Message Class 37

Screen Painter

Recommended Now

All-new Echo Dot Smart speaker with Alexa

This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.

Check it out on amazon.com →

The Message Class 37 (Screen Painter) is a standard Message Class in SAP ERP and is part of the package SCRP.

Technical Information

Message Class 37
Short Text Screen Painter
Package SCRP

Messages

ID Language Text
000 D Bitte als Dynpronummer nur numerische Werte verwenden
001 D Bitte eine Dynpronummer < 9000 verwenden
002 D Bitte eine Dynpronummer >= 9000 verwenden
003 D Das Generieren wurde abgebrochen
004 D Textelement benötigt einen Namen zur Übersetzung
005 D Dynpro &1 &2 konnte nicht gesichert werden
006 D Dynpro & & wurde ohne Prüfung gesichert
007 D Dynpro & & wurde gelöscht
008 D Die Bearbeitung des Dynpros & & wurde abgebrochen
009 D Das Dynpro & & konnte nicht importiert werden
010 D Dynpro & & ist nicht vorhanden
011 D Es wurde kein Dynpro selektiert
012 D Es wurde kein Datenelementzusatz selektiert
013 D Dynpro ist nicht vorhanden, kann hinzugefügt werden
014 D Anzuzeigendes Dynpro wurde nicht gefunden
015 D OK-Code-Feld von Dynpro & & fehlt oder ist fehlplaziert
016 D Dynpro & & hat unzulässige Werte für Spalten- oder Zeilenanzahl
017 D Element & in & & hat unzulässigen Wert für Zeile, Spalte oder Länge
018 D Dynpronummer 0 ist nicht vorgesehen
019 D Die Ablauflogik in Dynpro & & ist leer
020 D Selektionsdynpro (Reportgenerierung macht Dynproänderungen wirkungslos)
021 D Dynpro-Header unvollständig: Programmname oder Dynpronummer
022 D &1 &2 ist kein Subscreen-Dynpro (Include-Dynpro)
023 D Die Aktion wurde abgebrochen
024 D Zeichen &1 im Elementnamen nicht erlaubt
025 D Bitte geben Sie eine Kurzbeschreibung an
026 D Das Dynpro &1 &2 ist geschützt. Bitte Erläüterung im Langtext beachten
027 D Aus der Liste der Tabellen wurde nichts ausgewählt
028 D Tabelle wurde nicht im Dictionary gefunden
029 D Generiertes Dynpro nicht aktuell
030 D Dynpronummern 8500-8999 bitte nur für Partnerentwicklungen verwenden
031 D Dynpronummern 8500-8999 bitte nur für Partnerentwicklungen verwenden
032 D Im Kundennamensraum bitte keine Dynpros anlegen
033 D &1 &2 &3
034 D Für Dynpro & & wurde eine Version erzeugt
035 D Für Dynpro & & wurde keine Version erzeugt
036 D Bitte Programmnamen angeben
038 D Suchhilfe & ist nicht aktiv im Dictionary vorhanden
039 D Field-Id & zum Matchcode-Objekt & ist nicht aktiv im Dictionary vorhanden
040 D Format & ist im Screen Painter nicht vorgesehen
041 D Format aus dem Data Dictionary im Screen Painter nicht vorgesehen
042 D Bitte sowohl Feld-Id als auch Feldnamen für den Subkey angeben
043 D Bitte dem Dynproelement zuerst einen Namen geben
044 D Feld & kann kein Matchcode Subkey zugeordnet werden
045 D Dict-Feldname ist bereits im Bild vorhanden
046 D Dict-Feld &-& wurde im Dictionary nicht gefunden
047 D Der Platz für Dict-Feld ist nicht ausreichend
048 D Typ & aus Dictionary für Dynproelement & ist nicht zulässig
049 D Eintrag in eine Loop-Folgezeile ist nicht vorgesehen
050 D Name & ist bereits bei einem anderen Dynproelement vorhanden
051 D Element & in & & hat Länge 0, Bearbeitungsmöglichkeiten eingeschränkt
052 D Element & in & & ist ein Splitter Control, Bearbeitung nicht möglich
054 D Letzte Zeile ist belegt (Einfügen ist nicht möglich)
055 D Einfügen einer Zeile im Loop ist nicht möglich
056 D Löschen einer Loop-Zeile ist nicht möglich
057 D Einfügen einer Zeile innerhalb eines Rahmens ist nicht möglich
059 D Loop-Anfangszeile darf nicht leer sein
060 D Bitte den Cursor auf ein (passendes) Dynproelement positionieren
061 D Bitte den Cursor auf ein grafisches Element positionieren
062 D Bildgrenzen (&1 Zeilen, &2 Spalten) überschritten
063 D Kollision am Zielort (Operation wurde nicht ausgeführt)
064 D Festlegung Loop-Block-Endezeile nur ohne Folgezeilen
065 D Loop-Block-Endezeile nicht größer als Anfangszeile
066 D Platz für Loop-Folgezeilen ist nicht ausreichend
067 D Var.Loop beansprucht ganze Zeilenbreite (Operation nicht ausgeführt)
068 D Erfolgreiche Umwandlung in einen fixen (nicht resize-fähigen) Steploop
069 D Erfolgreiche Umwandlung in einen variablen (resize-fähigen) Steploop
070 D Erfolgreiche Umwandlung in ein Table Control
071 D Cursor außerhalb des Dynpros ist nicht zulässig
072 D Umwandlung in Table Control beendet (& Spaltenüberschrift(en)n gelöscht)
073 D Markierung in Loop-Folgezeilen ist nicht zulässig
074 D Umwandlung in Table Control wurde abgebrochen
075 D Bitte der Zeilenmarkierspalte einen Namen geben
076 D Überschneidung Ziel-Block mit Loopzeilen
077 D Maximale Bildgrenzen (&1 Zeilen, &2 Spalten) überschritten
078 D Überschneidung Markierung mit Loopzeilen
080 D Bitte durch Markieren die ausgewählten Felder plazieren
081 D Keine Felder ausgewählt (Bitte Vorauswahl überprüfen)
082 D Zu wenig Platz für Tabellen/Programmfelder (Felder nicht plaziert)
083 D Bitte Felder durch Funktion 'Einsetzen' aus Zwischenspeicher plazieren
084 D Name ist bereits vorhanden (Anlegen durch Einsetzen ist nicht möglich)
085 D ZWSpeicher hat unpassenden Inhalt (Einsetzen nicht möglich)
086 D Unverträgliche Attributkombination zur Zeilenmarkierbarkeit
087 D Das Zeilenmarkierelement & wird gelöscht
088 D Das Zeilenmarkierelement kann nicht gelöscht oder ausgeschnitten werden
089 D Einsetzen von & wird übergangen, da im Zwischenspeicher nur Textfeld
090 D Bitte den Cursor auf ein eingabebereites Feldnamensfeld positionieren
091 D Bitte zuerst einen Namen eintragen (Element existiert noch nicht)
092 D Bitte zuerst das Spaltenelement für die Tabellenspalte & anlegen
093 D Zu & ist im Data Dictionary kein Überschriftstext definiert
094 D Bitte eine Spaltenbreite > 0 angeben
095 D Vorige Spalten werden ebenfalls fixiert
096 D Fixierung nachfolgender Spalten wird ebenfalls aufgehoben
097 D Bitte sichtbare Länge zwischen & und & wählen
098 D Element ist bereits angelegt (Bearbeiten mit Funktion 'Attribute')
099 D Zu & gibt es Spaltenüberschriften, die mit gelöscht werden
100 D Attribut 'Konfigurierbarkeit' für & wird oder bleibt rückgesetzt
101 D Bitte Tabellen-/Feldnamen angeben
102 D Tabelle & ist im Data Dictionary nicht aktiv vorhanden
103 D Bitte einen maximal 30 Zeichen langen Tabellennamen angeben
104 D Zu &1-&2 existiert keine Dictionary Information
105 D Zu & gibt es ein Titelfeld &. Es wird gelöscht
106 D Bitte den Cursor auf ein zulässiges Feldnamensfeld positionieren
108 D Bitte den Cursor auf eine freie Stelle positionieren
109 D Bitte den Cursor auf ein Table Control positionieren
110 D Bitte Cursor auf einem modifizierten Dynproelement positionieren
111 D Modifikation & wurde gelöscht
112 D Das Dynpro hat noch keine Felder, die einen Namen haben
113 D Bildgruppe & zum Programm & wurde in Tabelle TFAWT aufgenommen
114 D Zum Programm & gibt es noch keine Bildgruppe
115 D Tabellen-Dynpro & & ist bereits vorhanden
116 D Dynproelement &1 zu lang, gekürzt auf Länge &2
118 D Feldnamen &1 nicht vorhanden
119 D Dynpro enthält noch keine Drucktasten
120 D Erfolgreiche Umwandlung in Drucktaste(n)
121 D Erfolgreiche Umwandlung in Auswahlknopf/Auswahlknöpfe
122 D Erfolgreiche Umwandlung in Ankreuzfeld(er)
123 D Erfolgreiche Umwandlung in Ein-/Ausgabefeld(er) oder Textfeld(er)
124 D Der Steploop wurde aufgelöst
125 D Das Table Control wurde aufgelöst
126 D Grafisches Element nicht vollständig im Loop (Operation nicht ausgeführt)
127 D Ein-/Ausgabefeld und Textfeld sind nicht im gleichen Loop
128 D Erfolgreiche Umwandlung in Field Control
129 D Aktion wurde abgebrochen
130 D Dynpro & & wurde gesichert und generiert
131 D Es wurden keine Syntaxfehler gefunden
132 D Dynpro & & wurde im Anzeigemodus generiert
133 D Table Control & ist bereits horizontal resize-fähig. Nicht ausgeführt
134 D Table Control & ist bereits vertikal resize-fähig. Nicht ausgeführt
135 D Loop enthält unzulässiges Element (Operation nicht ausgeführt)
136 D Einfügen einer Zeile in einem Bereich ist nicht möglich
137 D Löschen einer Zeile in einem Bereich oder Rahmen ist nicht möglich
138 D Markierung überschneidet sich mit einem Bereich
139 D Der Name ist bereits einem anderen Bereich zugeordnet
140 D Größe des Bereichs oder Controls unzulässig
141 D Bitte Ende des Bereiches markieren
142 D Platz ist nicht ausreichend für einen Bereich
143 D Element kann nicht im Loop-Block angelegt werden
144 D Ein Loop ist bereits variabel (vertikal resize-fähig). Nicht ausgeführt
145 D Gewünschtes Textfeld (Schlüsselwort) ist im Dict nicht vorhanden
146 D Platz für Feld kürzer als im Dict festgelegt
147 D 1..4 Texte aus Dict, V variable Texte aus Dict, F fixe Modifikation
148 D Textfeld wird als modifiziert gekennzeichnet, da im Dict nicht vorhanden
149 D Dynprobearbeitung wurde abgebrochen
150 D Zeilenzahl nur zwischen 'belegt' und maximal & möglich
151 D Spaltenzahl nur zwischen 'belegt' und maximal & möglich
153 D Drucken Dynpro wurde abgebrochen
154 D Dynpro &1 &2 wurde aktiviert
155 D Dynpro &1 &2 wurde generiert
156 D Dynpro ist zu groß (Pflegegröße ist nicht änderbar)
157 D Markierte Zeile ist nicht löschbar
159 D Dynpro & & konnte nicht angelegt werden
160 D Zwischenspeicher ist leer
161 D Feldname & ist bereits im Dynpro vorhanden
162 D Fehler beim Sichern (Generieren ist nicht möglich)
163 D Zieldynpro ist bereits vorhanden (Bitte zuerst löschen)
164 D Zu kopierendes Dynpro ist nicht vorhanden
165 D Dynpro & & wurde hinzugefügt
166 D & &
167 D &
168 D Bitte Wert für &1 angeben
169 D Bitte Dynpronamen angeben
170 D Zwischenspeicher wurde belegt mit & Zeilen & Spalten
171 D Kopieren Dynpro wurde abgebrochen
173 D Löschen Dynpro wurde abgebrochen
175 D Bitte eine Bearbeitungsart auswählen
178 D Das OK-Code-Element kann nicht gelöscht werden
180 D Platz reicht nicht aus (Dynproelement wird abgeschnitten)
181 D Maximale Länge ist &1 Zeichen
182 D In Loopzeilen nur Ankreuzfelder,Auswahlknöpfe und Drucktasten vorgesehen
183 D Drucktasten benötigen zur Definition einen Namen
184 D Funktion ist derzeit noch nicht unterstützt
185 D Bitte markieren Sie nur ein einzelnes Dynproelement
186 D Markierung überschneidet sich mit einem graphischen Element
187 D Bitte rechte untere Ecke des Rahmens durch Markieren festlegen
188 D Gewünschte Rahmenverkürzung ist wegen Textverlust nicht möglich
189 D Gewünschte Verlängerung der Rahmens ist nicht möglich
190 D Bitte Loopende unterhalb des ersten Loopblockes markieren
191 D Mindestens zwei Loopblöcke beim Markieren berücksichtigen
192 D Bitte Loopende nicht unterhalb des vorgesehenen Bereiches markieren
193 D Als Drucktaste darf nur ein einzelnes Element markiert sein
194 D Attribut 'Eingabe' beim Wandeln in Rahmen oder Drucktasten entzogen
195 D Gewünschte Rahmenhöhe ist zu klein
196 D Gewünschte Rahmenbreite ist zu klein
197 D Es ist kein Platz für die Rahmenseitenkante vorhanden
198 D Rahmen schneidet oder berührt ein anderes Dynproelement
199 D Der Platz reicht für eine Drucktaste nicht aus
200 D Benutzer & bearbeitet bereits das Dynpro & &
201 D Sie besitzen keine Berechtigung zur Anzeige
202 D Sie besitzen keine Berechtigung zum Ändern
203 D Das Programm & existiert noch nicht
204 D Nicht ausführbare Elementveränderungen in einer Dynprozeile
205 D Grafische Elemente können nicht Muß-Eingabefelder sein
206 D Text zu Ankreuzfeld oder Auswahlknopf kann kein Ein-/Ausgabefeld sein
207 D Gewünschte Verlängerung ist nicht möglich ( gekürzt)
208 D Text, Ein/Ausgabe-Schablone und Icon dürfen nicht gleichzeitig fehlen
209 D Element ist zu lang (Sichtbare Feldlänge wird gekürzt)
210 D Das umzubenennende Dynpro ist nicht vorhanden
211 D Dynpro & & wurde in & & umbenannt
212 D Das Umbenennen wurde abgebrochen
213 D Sichtbare Länge ist kleiner als definierte Länge (Nicht gewandelt)
214 D Zeichen @ ist als erstes Textzeichen nicht zulässig (Nicht ausgeführt)
215 D Länge 0 ist nicht zulässig (Nicht ausgeführt)
216 D & ist hier kein zulässiger Icon-Name (Bitte Eingabehilfe benutzen)
217 D Permanente Eingabehilfetaste für & wird zur Laufzeit ignoriert werden
218 D Bitte mindestens definierte Länge & verwenden
219 D Typwechsel zwischen Textfeld und Ein/Ausgabefeld ist nicht möglich
220 D Platz ist nicht ausreichend für Icon der Länge & (Nicht ausgeführt)
221 D Eingabefeldern kann kein Icon zugeordnet werden
222 D Dem Element & ist ein Icon zugeordnet(Nicht wandelbar in graf. Element)
223 D Sichtbare Länge kleiner als Icon-Länge (Nicht ausgeführt)
224 D Icon & ist kein zulässiges Drucktasten-Icon (Nicht gewandelt)
225 D Icon & nur als Drucktasten-Icon zulässig (Nicht gewandelt)
226 D Nur Eingabefelder können Muß-Felder sein (Nicht ausgeführt)
228 D Umwandlung in FieldControl nur für Einzelelement möglich
230 D & hat unzulässigen Programmtyp I oder S
232 D Fehler bei Aufbau des ContainerControls. Programm beendet
233 D Fehler bei Aufbau des TreeControls.
234 D Ansicht aktualisiert
235 D Bitte gültigen Eintrag wählen.
236 D Zu diesem Objekt ist kein Kontextmenu verfübar.
237 D Dokumentation ist nicht verfügbar.
238 D Fehler im Aufbau der Dokuanzeige(&1). Aktion abgebrochen.
239 D Aufruf des Editors fehlgeschlagen.Aktion abgebrochen.
240 D Grafischer Layout Editor nicht aktiv oder konnte nicht abgebrochen werden
241 D Grafischer Layout Editor wurde abgebrochen
242 D Grafischer Layout Editor: F1-Hilfe über Performance Assistant unmöglich
250 D Datei enthält kein Dynpro
251 D Dynpro-Datei wurde in einem unverträglichen Release erstellt
252 D Die Versionen des Dynpros &1 stimmen überein
260 D Das Anlegen einer Modifikation wurde abgebrochen
261 D Das Dynpro ist modifiziert. Löschen deshalb nicht möglich
270 D Funktionstyp 'Lokale GUI-Funktion' ist hier nicht zulässig
271 D Drop-down box: Visualisierte Länge muß >= 3 sein
272 D Drop-down box: Visualisierte Länge muß größer als &1 sein
273 D Drop-down box: Definierte Länge darf höchstens &1 sein
274 D Rollbarer Subscreen: Bitte minimale Länge &1 einhalten
275 D Rollbarer Subscreen: Bitte minimale Höhe &1 einhalten
276 D Funktionscode darf nicht mit '/' beginnen
277 D Referenzfeld &1 existiert nicht im Dynpro oder hat falschen Typ
314 D Element & überschreitet Pflegebereich (&/&) des Dynpros
315 D Element & überlappt sich mit anderen Elementen oder berührt sie
320 D Editieren von Ablauflogiken nur mit Standardzeilenlänge(72) möglich
330 D Ablauflogik enthält ein Feldsymbol &1. Testen nicht möglich
331 D Fehler: Ablauflogik enthält das Control &1, die Elementliste aber nicht
400 D ************* Nachrichten aus Klassen des Screen Painters ************
401 D Interner Fehler: Strukturfehler in D023S, Property Bag ohne Header
402 D Interner Fehler: Strukturfehler in D023S, Property Bag ohne Body
403 D Interner Fehler: Property Bag zu &1 existiert nicht
404 D Interner Fehler: Typ des Dynproelements &1 nicht bestimmbar
405 D Interner Fehler: Syntaxfehler in Property String &1
406 D Property-Tag &1 unbekannt
407 D Bitte geben Sie dem Dynproelement einen Namen
408 D Bitte geben Sie dem Attribut '&1' einen Wert
409 D Attribut &1 zum Property-Tag &2 unbekannt
410 D Interner Fehler: Property String zu &1 länger als &2
411 D &1 existiert nicht oder ist kein zulässiger Bezeichner
420 D Zum Custom Control &1 gibt es bereits ein Control Composite
421 D Zum Custom Control &1 gibt es noch kein Control Composite
498 D Interner Fehler: Funktion &1 nicht mehr unterstützt
499 D Interner Fehler: Funktion ist in Entwicklung
500 D ****************EU Screen Painter **************************************
501 D Die Versionsverwaltung wurde abgebrochen
502 D Dynpro & & existiert bereits
503 D Der Name & ist bereits im Dynpro & vorhanden
504 D Die Tabelle & ist nicht im Data Dictionary enthalten
505 D Das Data Dictionary enthält zu & keine Feldinformation
506 D Der Typ von & ist in einem Dynpro nicht möglich
507 D Die Textlänge ist 0 (Bitte einen anderen Text auswählen)
508 D Das Data Dictionary enthält zu & keinerlei Texte
509 D Das Dynpro & & ist frei von Inkonsistenzen
510 D Ablauflogik von Dynpro & & ist fehlerhaft (Bitte Syntax prüfen)
511 D Programm & ist fehlerhaft (Bitte Syntax prüfen)
512 D Das Anlegen eines Dynpros wurde ohne Sichern abgebrochen
513 D Das Drucken wurde abgebrochen
514 D Dynpros & & existieren nicht
515 D Bitte den Cursor auf eine Dynpronummer positionieren
516 D Bitte den Cursor auf eine Dynpronummer positionieren
517 D Anlegen des Tabellendynpros abgebrochen
518 D Dynpro &1 &2 konnte nicht generiert werden: &3
519 D Dynpro ist durch Korrektur oder Textübersetzung gesperrt
520 D Bitte Programm und Dynpronummer angeben
521 D & enthält tiefe Strukturen. Übernehmen nicht möglich
522 D Fehler beim Löschen von &
523 D Interner Fehler in &1 &2
524 D Interner Fehler im Scanner (Speicher nicht ausreichend)
525 D & ist durch eine Korrektur gesperrt
526 D Feld &1 gibt es in (aktiver Fassung von) Tabelle &2 nicht
527 D Graf. Layout Editor nicht verfügbar (Fortsetzung mit alphanum. Editor)
528 D Feld & gibt es in (generierter Fassung von) Programm & nicht
529 D Die Dynprobezeichnung & & ist unzulässig
530 D Bitte den Cursor auf ein Auswahlfeld positionieren
531 D Bitte genau einen Dynprotyp auswählen
532 D Das Einstellen wurde abgebrochen
533 D Bitte Cursor auf einen nichtleeren Namen positionieren
534 D Eine Datendefinition für & existiert nicht in &
535 D Das Auswählen wurde abgebrochen
536 D Bitte den Cursor auf ein eingabebereites Feld positionieren
537 D Bitte den Cursor auf ein Dynproelement positionieren
538 D Bitte dem Dynproelement einen Namen geben
539 D Bitte den Cursor auf ein DDIC-Feld positionieren
540 D Umwandlung ist nicht möglich (Ein/Ausgabefeld & ist länger als 1)
541 D Umwandlung ist nicht möglich (Typ von & ist nicht CHAR oder NUMC)
542 D Umwandlung von Textfeld & in graf. Element ist nicht möglich
543 D Kein Element im markierten Bereich umwandelbar in graf. Element
544 D Umwandlung ist nicht möglich (Button und Text sind nicht benachbart)
545 D Umwandlung ist nicht möglich (Zwei Buttons benachbart)
546 D Bitte Cursor so positionieren, daß mehrere Elemente ganz umfaßt werden
547 D Auswahlfelder wurden zu graf. Gruppe zusammengefaßt
548 D Graf. Gruppe wurde in einzelne Auswahlknöpfe aufgelöst
549 D Ankreuzfelder und Auswahlknöpfe in Elementliste nicht löschbar
550 D Bitte Element & mit in den markierten Bereich aufnehmen
551 D Bitte allen Elementen des markierten Bereichs einen Namen geben
552 D Ankreuzfelder und Auswahlknöpfe benötigen einen Namen
553 D Namen & ist schon an ein grafisches Element vergeben
554 D Namen & ist schon an Ein/Ausgabefeld oder Textfeld vergeben
555 D Bereiche benötigen einen eindeutigen Namen (Operation nicht ausgeführt)
556 D Bitte zuerst den Namen & des OK-Code-Elementes löschen
557 D & ist ein Bereich (Subscreen) (Operation nicht ausgeführt)
558 D Keine Beanstandungen zum Layout
559 D Modifikationsmodus: Markierter Bereich enthält unerlaubte Elemente
560 D Dynpro & & wurde ohne Sichern mit voller Ablauflogik generiert
561 D Dynpro & & wurde ohne Sichern ohne PAI-Teil der Ablauflogik generiert
562 D & & ist Selektions- oder Vorlagedynpro (keine Prüfung)
563 D Dynpro-Konsistenzprüfung für & mußte abgebrochen werden
564 D Nur eines von zwei Elementen & liegt im Loop (Wandeln nicht möglich)
565 D & darf nicht gelöscht werden. Übernehmen nicht möglich.
566 D Bitte genügend Platz für Eingabehilfe-Icon reservieren
567 D Element eines Databound Controls kann nicht gelöscht werden
568 D Element & ist keine Drucktaste oder hat keine zugeordnete Funktion
569 D Funktion im Modifikationsmodus für Originalelement & nicht ausführbar
570 D Der markierte Bereich überschneidet sich mit einem Rahmen
571 D Der markierte Bereich schneidet Auswahlknöpfe oder Ankreuzfelder
572 D Modifikationen in & & zurückgenommen. Original wiederhergestellt
573 D Dynpro & noch nicht modifiziert oder Original existiert nicht
574 D Modifikation: Lese-/Schreibfehler für Sourcen von &
575 D Kein Versionen zu Dynpro & gefunden
576 D Version zu Dynpro & wurde zurückgeholt
577 D Die Layoutprüfung zu Dynpro &1 &2 ergab keine Fehler
578 D Dynpro & unterscheidet sich nicht vom Original
579 D Testen Dynpro: Generierungsfehler in Ablauflogik für &1
580 D Bitte Ende des Loop-Blocks (Wiederholungsblock) markieren
581 D Bitte den Cursor so positionieren, daß Elemente ganz umfaßt werden
582 D Kein Platz für mindestens 2 Loop-Wiederholungsblöcke verfügbar
583 D Andere Elemente werden geschnitten (Loop nicht verändert)
584 D Rekursives CALL SCREEN für &1 &2 ist nicht möglich
585 D Support Package System: Änderungen am Dynpro nur eingeschränkt möglich
586 D Testen wurde abgebrochen
587 D & & wird auf Standard 21x83 umgestellt, noch ungesichert
588 D Testen ist nicht möglich (Bitte die Ablauflogik prüfen)
589 D Testen ist z.Z. nicht möglich (Sperrtabelle voll oder Sperrfehler)
590 D Interner Fehler bei & (Dynpro & & ist beschädigt oder unvollständig)
591 D Interner Fehler (Illegaler Parameter & von Funktionsbaustein &)
592 D Interner Fehler unter &1 (&2 wurde nicht gefunden)
593 D Interner Fehler (Falsches Dynpro & &)
594 D Interner Fehler unter &1 (&2 nicht ausführbar)
595 D Interner Fehler: Profile-Parameter &1 hat unzulässigen Wert &2
596 D Logon mit Unicode ON in Unicode-System. Fortsetzung mit Alpha-Screen
597 D Interner Fehler unter &1 (Starterprogramm &2 nicht gefunden)
598 D GUI-Release & kleiner als System-Release &. Fortsetzung mit Alpha-Screen
599 D Interner Fehler (Unvollständige Datenübertragung bei & &)
600 D &
601 D GUI ist kein GUI für Windows (Fortsetzung mit alphanumerischem Editor)
602 D Element & ist modifiziert gegenüber Data Dictionary
603 D Element & stimmt nicht mit Definition im Programm überein
604 D Elementname & ist bereits vorhanden (Name nicht geändert)
606 D Minimale Elementlänge unterschritten (Element nicht verändert)
607 D Elementname &-& konnte nicht gegen Dictionary verglichen werden
608 D Elementname & konnte nicht gegen Programmfelder verglichen werden
609 D Eingabe muß numerisch und positiv sein (Wert nicht verändert)
610 D Bildgrenze überschritten (Element nicht verändert)
611 D Überlappung oder Berührung (Element nicht verändert)
612 D Feldname & ist kein zulässiger Dictionary-Name ('-' fehlt)
614 D Feldname darf nicht leer sein (Name nicht geändert)
615 D Text darf nicht mit Unterstrich beginnen ('_' durch '#' ersetzt)
617 D Element wird modifiziert, da keiner der Dictionary-Texte paßt
618 D Gewünschter Text ist im Dictionary nicht vorhanden
619 D Element ist kürzer als im Dictionary festgelegt
620 D Ein/Ausgabe-Schablone muß mit Unterstrich beginnen (1. Zeichen ersetzt)
621 D Icon & ist nicht bekannt (Icon-Name nicht geändert)
622 D Text darf nicht mit Icon-Code beginnen ('@' durch '#' ersetzt)
623 D Icon & ist für diesen Objekttyp nicht zulässig (Icon-Name nicht geändert)
624 D Attributname &->& konnte nicht gegen Klassenbibl. verglichen werden
625 D Feldname & ist kein zulässiger Klassenattributname ('->' fehlt)
626 D Format & paßt nicht zum Property-Format &
627 D Format & des Dictionary-Feldes & paßt nicht zum Property-Format &
628 D Funktionscode darf nicht mit Schrägstrich beginnen ('/' entfernt)
650 D Var. Steploop konnte nicht angepaßt werden (Dynpro-Größe nicht verändert)
653 D Kollision am Zielort (Element nicht plaziert)
654 D Überschreitung der Bildgrenzen (Element nicht plaziert)
655 D Kollision am Zielort (Gruppe nicht plaziert)
656 D Kollision am Zielort, weil Font zu klein (Element nicht plaziert)
661 D OkCode-Feld & konnte nicht aus Dictionary geholt werden
664 D Keine Objekte gelesen
665 D Minimale Dynpro-Größe & unterschritten (Größe nicht verändert)
666 D Maximale Dynpro-Größe & überschritten (Größe nicht verändert)
667 D Element(e) außerhalb der neuen Grenzen (Dynpro-Größe nicht verändert)
668 D Minimale Länge des Steploops unterschritten(Dynpro-Größe nicht verändert)
669 D Min.Länge des var.Steploops unterschritten (Dynpro-Größe nicht verändert)
670 D Dynpro konnte nicht auf Datei gesichert werden
671 D Dynpro auf Datei gesichert
672 D XSynchronize ist angeschaltet (Ausschalten mit Ctrl-x)
673 D Es ist bereits ein variabler Steploop definiert
674 D Fixer Steploop neben variablem nicht erlaubt (Steploop nicht angelegt)
675 D Elementname & ist bereits vorhanden (Text nicht übernommen)
676 D Name(n) bereits vorhanden. Betreffende Elemente unbenannt übernehmen?
700 D Es sind weder Ein/Ausgabe-Schablone noch Text eingeschaltet
701 D Übernahme im Testmodus nicht möglich
702 D Dictionary-Tabelle muß genau spezifiert werden
703 D Feld & ist entweder leer, nicht zulässig oder bereits in Elementliste
704 D Felder sind entweder leer, nicht zulässig oder bereits in Elementliste
705 D Ein/Ausgabefeld & hat keinen Namen
707 D Feld & ist zu lang (auf maximale Feldlänge & gekürzt)
708 D Selektion enthält nicht übernehmbare Felder
709 D Selektion im Anzeigemodus nicht möglich
720 D Unzulässiger Typ für Reiterelement im Tabstrip
721 D Unzulässiger Typ für Seitenelement im Tabstrip
722 D Keine Tabstrip-Seite ausgewählt
723 D Unreferenziertes Seitenelement wurde gelöscht
724 D Kollision mit Seitenelement im Tabstrip
728 D Seitenelement & nicht gefunden. Referenz nicht übernommen
730 D Unzulässiger Typ für Element im Databound Control
750 D Maximale Elementgröße überschritten
751 D Minimale Elementgröße erreicht
752 D Kollision am Zielort (Element nicht verschoben)
753 D OkCode kann nicht gelöscht werden
754 D Bildgrenze überschritten (Element nicht verschoben)
755 D Überlappung oder Berührung
756 D Bild- bzw. Behältergrenze erreicht
758 D Fixer Steploop neben variablem nicht erlaubt (Steploop nicht verschoben)
759 D Icon-Name ist leer
760 D Element darf nur Ausgabe-, nicht Eingabefeld sein
761 D Status-Icon erlaubt keinen Text
762 D Interner Fehler (Bild für Icon & im Screen Painter nicht bekannt)
763 D Kollision am Zielort (Element verkürzt und rollbar gemacht)
764 D Behälterwechsel im Modifikationsmodus nicht erlaubt
765 D & ist CHAR 1-Feld. Umwandeln in
766 D Elementname zu lang (max. & Zeichen)
770 D Keine Leerzeile für Rahmen gefunden (Umwandlung nicht möglich)
771 D Keine Leerspalte für Rahmen gefunden (Umwandlung nicht möglich)
772 D Textfeld ist leer (Umwandlung nicht möglich)
773 D Drucktaste ist leer (Umwandlung nicht möglich)
774 D Drucktasten-Icon ist nicht mit Text vereinbar (Umwandlung nicht möglich)
775 D Referenzelement & nicht gefunden
780 D Selektion enthielt kein Element
781 D Kollision am Zielort (Gruppe nicht verschoben)
782 D Bildgrenze überschritten (Gruppe nicht verschoben)
785 D Gruppe muß mindestens 2 Auswahlknöpfe enthalten
786 D Gruppe darf nur Auswahlknöpfe enthalten
788 D Fixer Steploop neben variablem nicht erlaubt (Gruppe nicht verschoben)
789 D Geschachtelte Steploops sind nicht erlaubt (Steploop nicht angelegt)
790 D Auswahlknopf ohne Feldname (Gruppe nicht angelegt)
791 D Kollision am Zielort (& Element(e) verkürzt oder nicht übernommen)
792 D Gruppenelemente in verschiedenen Containern
793 D Elemente einer Auswahlknopfgruppe in verschiedenen Containern
800 D Inkrement für mehrzeiligen Steploop zu klein (Steploop nicht verändert)
801 D Minimale Steploop-Größe erreicht
802 D Maximale Steploop-Größe erreicht
803 D Kollision am Zielort (Steploop nicht verschoben)
804 D Steploop enthält unzulässiges Elem.für Table Control (Konv.nicht möglich)
805 D Überlappung von Steploops
806 D Umwandlung nicht möglich
807 D Nicht genug Platz für Steploop
808 D Mindestgröße des Steploops unterschritten
809 D Fixer Steploop neben variablem nicht erlaubt (Steploop nicht verändert)
810 D Bricht das Anlegen des neuen Dynpro-Elements ab
811 D Legt ein neues Textfeld auf dem Dynpro an
812 D Legt ein neues Ein/Ausgabefeld auf dem Dynpro an
813 D Legt eine neue Drucktaste auf dem Dynpro an
814 D Legt ein neues Ankreuzfeld auf dem Dynpro an
815 D Legt einen neuen Auswahlknopf auf dem Dynpro an
816 D Legt einen neuen Rahmen auf dem Dynpro an
817 D Legt einen neuen Subscreen auf dem Dynpro an
818 D Legt ein neues Table Control auf dem Dynpro an
819 D Legt ein neues Ein/Ausgabefeld für ein Status-Icon auf dem Dynpro an
820 D &
821 D Bitte das Textfeld auf dem Dynpro plazieren
822 D Bitte das Ein/Ausgabefeld auf dem Dynpro plazieren
823 D Bitte die Drucktaste auf dem Dynpro plazieren
824 D Bitte das Ankreuzfeld auf dem Dynpro plazieren
825 D Bitte den Auswahlknopf auf dem Dynpro plazieren
826 D Bitte den Rahmen auf dem Dynpro plazieren
827 D Bitte den Subscreen auf dem Dynpro plazieren
828 D Bitte das Table Control auf dem Dynpro plazieren
829 D Bitte das Ein/Ausgabefeld auf dem Dynpro plazieren
830 D Bitte das Element auf dem Dynpro plazieren
831 D Bitte die Gruppe auf dem Dynpro plazieren
832 D Gruppenselektion enthielt unplazierte Elemente
833 D Selektion darf keine unplazierten Elem.enthalten (Element(e) ausgenommen)
834 D Element ist in bereits markiertem Elem.enthalten (Element nicht markiert)
835 D Element enthält bereits markiertes Element (Element nicht markiert)
836 D Element(e) in Container nicht sichtbar (Element(e) nicht markiert)
837 D Zeichen & ist im Elementnamen nicht zulässig
838 D Soll das Element auf das Dictionary Bezug nehmen?
839 D Elementname darf nicht nur aus Ziffern bestehen
840 D Legt ein neues Custom Control auf dem Dynpro an
841 D Bitte das Custom Control auf dem Dynpro plazieren
842 D Legt einen neuen Tabstrip auf dem Dynpro an
843 D Bitte den Tabstrip auf dem Dynpro plazieren
844 D Legt einen neues Databound Control auf dem Dynpro an
845 D Bitte das Databound Control auf dem Dynpro plazieren
846 D Ruft Wizard zum Anlegen eines neuen Table Controls auf dem Dynpro
847 D Bitte das Table Control auf dem Dynpro plazieren (Wizard folgt)
848 D Ruft Wizard zum Anlegen eines neuen Tabstrips auf dem Dynpro
849 D Bitte den Tabstrip auf dem Dynpro plazieren (Wizard folgt)
850 D Kollision im Table Control (Element nicht aufgenommen)
851 D Unzulässiges Element für Table Control (Konversion nicht möglich)
852 D Überschriftselement im Table Control verkürzt
853 D Minimale Höhe des Table Controls unterschritten
854 D Minimale Breite des Table Controls unterschritten
855 D Unzulässiger Typ für Überschriftselement im Table Control
856 D Unzulässiger Typ für Spaltenelement im Table Control
857 D Kollision mit Überschriftselement im Table Control
858 D Keine Spalte für Überschriftselement im Table Control
859 D Überschriftselement wurde gelöscht
860 D Überschriftselement(e) wurde(n) gelöscht
861 D Überschriftselement wurde ebenfalls gelöscht
862 D Überschriftselement(e) wurde(n) ebenfalls gelöscht
863 D Table Control enthält noch Elemente. Wollen Sie wirklich löschen?
864 D Wollen Sie das Titelelement wirklich löschen?
865 D Wollen Sie das Überschriftselement wirklich löschen?
866 D Wollen Sie die Überschriftselemente wirklich löschen?
867 D Das Überschriftselement wird auch gelöscht. Wirklich löschen?
868 D Die Überschriftselemente werden auch gelöscht. Wirklich löschen?
869 D Bitte legen Sie ein Titelelement für das Table Control an
870 D Bitte legen Sie Überschriftselemente für das Table Control an
871 D Bitte geben Sie dem Zeilenmarkierelement einen Namen
872 D Legt eine neue Dialoghilfe-Drucktaste auf dem Dynpro an
873 D Bitte die Dialoghilfe-Drucktaste auf dem Dynpro plazieren
875 D Knoten wurde nicht gefunden.
881 D Daten für Dynpro & & wurden nicht gefunden
882 D Verbindung zum SAP-System verloren (Programm wird beendet)
883 D Funktion im Testmodus nicht verfügbar
884 D &
885 D Daten können nicht aufbereitet werden. Programm beenden?
886 D Daten konnten nicht übergeben werden. Programm beenden?
887 D Interner Fehler beim Datenaustausch. Programm beenden?
888 D Table Controls im graf.Layout Editor erst ab Rel.3.0C unterstützt
889 D Windowsystem &1 im grafischen Layout Editor nicht unterstützt
890 D Bietet Icons zur Selektion an
891 D Zeichenkette nicht gefunden
898 D Funktion ist noch nicht implementiert
899 D Kann über den 'Web Dynpro Builder' ('View ändern...') angelegt werden
000 E Use only numeric values for screen number
001 E Use a screen number < 9000
002 E Use a screen number >- 9000
003 E Generation terminated
004 E Text element needs a name for translation
005 E Unable to save screen &1 &2
006 E Screen & & saved without checking
007 E Screen & & deleted
008 E Processing of screen & & terminated
009 E Unable to import screen & &
010 E Screen & & does not exist
011 E No screen selected
012 E No data element supplement selected
013 E Screen does not exist but can be created
014 E Screen not found
015 E Command field of screen & & is missing or in the wrong place
016 E Screen & & has invalid values for number of columns or lines
017 E Element & in screen & & has an invalid value for line, column or length
018 E Screen number 0 is not permitted
019 E Flow logic in screen & & is empty
020 E Selection screen: Report generation makes screen changes ineffective
021 E Screen header incomplete: Program name or screen number missing
022 E &1 &2 is not a subscreen
023 E Action cancelled
024 E Character &1 in element name not allowed
025 E Enter a short description
026 E Screen &1 &2 is protected, See the long text for more information
027 E No selection made from list of tables
028 E Table not found in ABAP Dictionary
029 E Generated screen is not the current version
030 E Screens 8500-8999 should only be used for partner developments
031 E Screens 8500-8999 should only be used for partner developments
032 E Do not create screens in customer namespace
033 E &1 &2 &3
034 E Version generated for screen & &
035 E No version generated for screen & &
036 E Please specify program name
038 E Search help & is not active in the ABAP Dictionary
039 E Field ID & for matchcode object & not active in ABAP Dictionary
040 E Format & is not permitted in the Screen Painter
041 E ABAP Dictionary format is not permitted in the Screen Painter
042 E Specify both a field ID and a field name for the subkey
043 E Assign a name to the screen element
044 E No matchcode subkey can be assigned to field &
045 E ABAP Dictionary field name already exists on the screen
046 E ABAP Dictionary field &-& not found in Dictionary
047 E Insufficient space for ABAP Dictionary field
048 E ABAP Dictionary type & is not allowed for screen element &
049 E Entry in a loop continuation line is not allowed
050 E Name & has already been assigned to another screen element
051 E Name & in & & has length 0, editing options limited
052 E Element & in & & is a splitter control, cannot be processed
054 E Last line is full, insert not possible
055 E Unable to insert line in loop
056 E Unable to delete loop line
057 E Unable to insert a line within a box
059 E Loop start line must not be blank
060 E Place the cursor on a suitable screen element
061 E Place the cursor on a graphical element
062 E Screen limit exceeded (&1 lines, &2 columns)
063 E Collision at target location. Operation not performed
064 E Specify loop block end line without continuation lines
065 E Loop block end line is smaller than first line
066 E Insufficient space for loop continuation lines
067 E Variable loop requires whole line. Operation not performed
068 E Successful conversion to a fixed (non-resizeable) step loop
069 E Successful conversion to a variable (resizeable) step loop
070 E Successful conversion to a table control
071 E Cursor not allowed outside screen
072 E Conversion to table control completed (& column header(s) deleted)
073 E Selection in loop continuation lines is not allowed
074 E Conversion to table control terminated
075 E Assign a name to the line selection field
076 E Target block overlaps with loop lines
077 E Maximum screen limits exceeded (&1 lines, &2 columns)
078 E Selection overlaps with loop lines
080 E Place the fields by selecting
081 E No fields selected. Please check preselection
082 E Too little space for table/program fields. Fields not placed
083 E Place fields from clipboard with 'Paste' function
084 E Name already exists (You cannot create by insertion)
085 E Contents of temp. storage are inappropriate (unable to insert)
086 E Invalid attribute combination for line selection
087 E The line selection element & will be deleted
088 E Unable to delete or cut out line selection element
089 E Insert & ignored because temporary storage contains only a text field
090 E Place the cursor on a field which can accept input
091 E Enter a name first (element does not yet exist)
092 E Create the column element for table column & first
093 E No header text is defined for & in the ABAP Dictionary
094 E Specify a column width > 0
095 E Previous columns are also fixed
096 E Fixing of subsequent columns also cancelled
097 E Choose a visible length between & and &
098 E Element already exists (edit with 'Attributes' function)
099 E & has column headers, which will also be deleted
100 E Attribute 'Configurability' for & will be or remains reset
101 E Specify table/field name
102 E Table & not active in ABAP Dictionary
103 E Specify a table name no longer than 30 characters
104 E No Dictionary information found for &1-&2
105 E For &, a title field & exists. It will be deleted
106 E Position the cursor on a valid field name field
108 E Place the cursor on a free position
109 E Place the cursor on a table control
110 E Place the cursor on a modified screen element
111 E Modification & deleted
112 E Screen has no fields which have a name
113 E Screen group & for program & saved in Table TFAWT
114 E No screen group exists for program &
115 E Table screen & & already exists
116 E Screen element &1 too long, shortened to length &2
118 E Field name &1 does not exist
119 E The screen does not contain any pushbuttons
120 E Successful conversion to pushbutton(s)
121 E Successful conversion to radio button(s)
122 E Successful conversion to checkbox(es)
123 E Successful conversion to input/output field(s) or text field(s)
124 E Step loop dissolved
125 E Table control dissolved
126 E Graphical element not complete in loop. Operation not performed
127 E Input/output field and text field are not in the same loop
128 E Conversion to Field Control successful
129 E Action canceled
130 E Screen & & saved and generated
131 E No syntax errors found
132 E Screen & & generated in display mode
133 E Table contro & can already be resized horizontally, not executed
134 E Table control & can already be resized vertically, not executed
135 E Loop contains an illegal element. Operation not performed
136 E You cannot insert a line in this area
137 E You cannot delete a line in this area
138 E Selection overlaps with an area
139 E This name is already assigned to another area
140 E Size of area or control is unpermitted
141 E Select end of area
142 E Insufficient space for area
143 E Unable to define screen element in loop block
144 E One variable (vertically resizeable) loop already exists. Not executed
145 E Text field (keyword) does not exist in the ABAP Dictionary
146 E Field text is shorter than specified in ABAP/4 Dictionary
147 E 1..4 Texts from Dict, V variable texts from Dict., F fixed modifications
148 E Text field flagged as modified, since it does not exist in the Dictionary
149 E Screen processing cancelled
150 E Number of lines must be between number 'filled' and maximum & only
151 E Number of columns must be between number 'filled' and maximum & only
152 E Max. 20 lines according to GUI standard
153 E Screen print terminated
154 E Screen &1 &2 activated
155 E Screen &1 &2 generated
156 E Screen is too large. Maintenance value cannot be changed
157 E Cannot delete selected line
159 E Screen & & could not be created
160 E Temporary storage is empty
161 E Field name & already exists for screen
162 E Error when saving. Generation not possible
163 E Target screen already exists. Delete first
164 E Screen to be copied does not exist
165 E Screen & & created
166 E & &
167 E &
168 E Enter value for &1
169 E Specify screen name
170 E Temporary storage was filled with & lines & columns
171 E Copy screen cancelled
172 E Create table screen cancelled
173 E Delete screen cancelled
174 E Choose a confirmation
175 E Choose a processing type
176 E Choose only one processing option
177 E Screen contains more than 19 lines. Adjust window
178 E The OK_CODE field cannot be deleted
179 E Table is not permitted for standard maintenance
180 E Not enough space. Element will be truncated
181 E Maximum length is &1 characters
182 E Only checkboxes, radio buttons and pushbuttons allowed in loop lines
183 E The definition of a pushbutton requires a name
184 E Function not supported at present
185 E Select only one screen element
186 E Selection overlaps graphical element
187 E Define lower right corner of box by selection
188 E Desired box reduction not possible due to text loss
189 E Unable to increase size of box
190 E Select loop end below first loop block
191 E Take into account at least two loop blocks when selecting
192 E Do not select loop end below the intended area
193 E Only one element may be selected as a pushbutton
194 E 'Input' attribute lost in conversion to box or pushbutton
195 E Desired box height is too small
196 E Desired box width is too small
197 E There is no space for the box page margin
198 E Box touches or overlaps with another screen element
199 E Insufficient space for a pushbutton
200 E User & is already editing screen & &
201 E You have no display authorization
202 E You are not authorized to make changes
203 E Program & does not exist
204 E Unable to execute element changes in a screen line
205 E Graphic elements cannot be required input fields
206 E Text for checkbox or radio button cannot be an input or output field
207 E Unable to increase length
208 E Text, input/output field and icon cannot all be missing at the same time
209 E Element is too long (visible field length will be shortened)
210 E Screen to be renamed does not exist
211 E Screen & & renamed as & &
212 E Renaming cancelled
213 E Visible length is shorter than defined length. No conversion
214 E Character @ not allowed as first character. Operation not performed
215 E Length 0 is not allowed. Operation not performed
216 E & is not a valid icon name (use input help)
217 E Permanent help key for values for & will be ignored at runtime
218 E Use at least the defined length &
219 E Type change between text field and input/output field is not possible
220 E Not enough space for icon of length &. Operation not performed
221 E Icons cannot be assigned to input fields
222 E An icon is assigned to element &. Unable to convert to graphical element
223 E Visible length is shorter than icon length. Operation not performed
224 E Icon & is not a valid pushbutton icon.
225 E Icon & is allowed only as a pushbutton icon.
226 E Only input fields can be required entry fields. Operation not performed
228 E Conversion to field control only possible for single element
230 E & has an invalid program type I or S
232 E Error while setting up ContainerControl. Program canceled
233 E Error while building tree control
234 E View updated
235 E Choose valid entry
236 E No context menu available for this object
237 E Documentation is not available
238 E Error while building documentation display(&1). Action canceled
239 E Calling editor failed. Action canceled
240 E Graphical Screen Painter not active or could not be canceled
241 E Graphical Screen Painter canceled
242 E Graphical layout editor: F1 help through Performance Assistant impossible
250 E File does not contain a screen
251 E Screen file created in an incompatible Release
252 E Versions of screen &1 are identical
260 E Creation of modification canceled
261 E You cannot delete the screen because it contains enhancements
270 E Function type 'Local GUI function' not allowed
271 E Visible length of the dropdown box must be >- 3
272 E Visual length of the dropdown box must be greater than &1
273 E Defined length of the dropdown box may not be more than &1
274 E Scrollable subscreen: Minimum length is &1
275 E Scrollable subscreen: Minimum height is &1
276 E Function code may not begin with '/'
277 E Reference field &1 does not exist in the screen or has incorrect type
314 E Element & exceeds the maintenance area (&/&) of the screen
315 E Element & touches or overlaps other element
320 E You can only edit the flow logic using the default line length (72 chars)
330 E Flow logic contains a field symbol &1. Test not possible
331 E Error: Flow logic contains control &1, but element list does not
400 E ************* Messages from Screen Painter Classes ************
401 E Internal error: Structure error in D023S, property bag without header
402 E Internal error: Structure error in D023S, property bag without body
403 E Internal error: Property bag does not exist for &1
404 E Internal error: Type of screen element &1 cannot be determined
405 E Internal error: Syntax error in property string &1
406 E Property tag &1 unknown
407 E Assign the screenelement a name
408 E Assign attribute '&1' a value
409 E Attribute &1 for property tag &2 unknown
410 E Internal error: Property string for &1 longer than &2
411 E &1 does not exist or is not a valid label
420 E There is already a Control Composite for Custom Control &1
421 E There is not yet a Control Composite for Custom Control &1
498 E Internal error: Function &1 no longer supported
499 E Internal error: Function is being developed
500 E **************** DW Screen Painter **************************************
501 E Version management terminated
502 E Screen & & already exists
503 E Name & is already used in screen &
504 E The table & is not defined in the ABAP Dictionary
505 E The ABAP Dictionary contains no field information about &
506 E The type & is not possible in a screen
507 E The text length is 0. Choose a different text
508 E The ABAP Dictionary contains no texts about &
509 E Screen & & contains no inconsistencies
510 E Flow logic of screen & & contains errors. Check syntax
511 E Program & contains errors. Check syntax
512 E Create screen process cancelled without saving
513 E Printing cancelled
514 E Screens & & do not exist
515 E Place the cursor on a screen number
516 E Place the cursor on a screen number
517 E Create table screen process cancelled
518 E Unable to generate screen &1 &2: &3
519 E Screen locked by a correction or text translation
520 E Specify program and screen number
521 E & contains deep structures. Unable to copy.
522 E Error when deleting &
523 E Internal error in &1 &2
524 E Internal error in scanner - too little memory
525 E & locked by a correction
526 E Field &1 does not exist in (active version of) table &2
527 E Graphical Layout Editor not available. Continue with alphanumeric editor.
528 E The field & does not exist in (the generated version of) program &
529 E The screen description & & is invalid
530 E Place the cursor on a selection field
531 E Choose only one screen type
532 E Setting cancelled
533 E Place the cursor on a name that is not empty
534 E No data definition for & exists in &
535 E Selection cancelled
536 E Place the cursor on a field that can accept input
537 E Place the cursor on a screen element
538 E Assign a name to the screen element
539 E Place the cursor on an ABAP Dictionary field
540 E Conversion not possible. (Input/output field & is longer than 1)
541 E Conversion not possible. Type & is not CHAR or NUMC
542 E Conversion of text field & to graphical element not possible
543 E No element in selected area can be converted to a graphical element
544 E Conversion not possible. Button and text do not match
545 E Conversion not possible. Two buttons defined
546 E Place the cursor so that several elements are completely enclosed
547 E Selection fields combined in a graphical group
548 E Graphical group expanded to individual pushbuttons
549 E You cannot delete checkboxes or radio buttons from the element list
550 E Include element & in the selected area
551 E Enter a name for all elements in the selected area
552 E Pushbuttons and checkboxes require a name
553 E Name & has already been assigned to a graphical element
554 E Name & has already been assigned to a template or field text
555 E Areas must have unique names. Operation not performed
556 E Delete the name & of the OK_CODE field first
557 E & is an area (subscreen). Operation not performed
558 E No layout errors
559 E Modification mode: Selected area contains unpermitted elements
560 E Screen & & has been generated without saving with complete flow logic
561 E Screen & & has been generated without a PAI section in the flow logic
562 E & & is a selection screen or template screen (no check)
563 E Screen consistency check for & had to be terminated
564 E Only one of two elements & is in the loop (unable to convert)
565 E & may not be deleted. Unable to adopt.
566 E Leave enough space for possible entries icon
567 E Unable to delete an element of a databound control
568 E Element & is not a pushbutton or has no assigned function
569 E You cannot use this function in modification mode for original element &
570 E Selected area overlaps a box
571 E Selected area overlaps radio buttons or checkboxes
572 E Modifications in & & undone. Original restored
573 E Screen & has not been modified or no original exists
574 E Modification: Read/write error for sources of &
575 E No versions found for screen &
576 E Version for screen & restored
577 E Layout check of sreen &1 &2 contains no errors
578 E Screen & is the same as the original
579 E Test screen: Generation error in flow logic for &1
580 E Select end of loop block
581 E Place the cursor so that all elements are completely enclosed
582 E No space for at least 2 loop blocks
583 E Other elements will be truncated (loop unchanged)
584 E Recursive CALL SCREEN not possible for &1 &2
585 E Support Package System: Changes to the screen are restricted
586 E Test cancelled
587 E & & converted to standard 21x83, still not saved
588 E Testing not possible. Check the flow logic
589 E Testing not possible at present. Lock table full or lock errors
590 E Internal error in &: Screen & & damaged or incomplete
591 E Internal error: Illegal parameter & from function module &
592 E Internal error with &1 (unable to find &2)
593 E Internal error: Incorrect screen & &
594 E Internal error with &2 (unable to execute &2)
595 E Internal error: Profile parameter &1 has invalid value &2
596 E Logon with Unicode ON in Unicode system. Continue with Alpha screen
597 E Internal error with &1 (unable to find starter program &2)
598 E GUI release & lower than system release &. Continue with alpha screen.
599 E Internal error: Incomplete data transfer with & &
600 E &
601 E GUI is not a GUI for Windows (continue with alphanumeric editor)
602 E Element & modified against ABAP Dictionary
603 E Element & does not match the definition in the program
604 E Field name & already exists. (Unable to change name)
606 E Element length too short (element not changed)
607 E Unable to compare field name &-& against ABAP Dictionary
608 E Unable to compare element name & against program fields
609 E Input not numeric (value not changed)
610 E Screen limit exceeded (element not changed)
611 E Field overlapped or bordered (element not changed)
612 E Field name & is not a valid ABAP Dictionary name ('-' missing)
614 E Field name cannot be blank. Name not changed
615 E Text cannot begin with an underscore ('_' replaced by '#')
617 E Element modified, since none of the Dictionary texts fits
618 E Field text does not exist in ABAP Dictionary
619 E Element is shorter than defined in ABAP Dictionary
620 E I/O template must begin with an underscore. First character replaced
621 E Icon & unknown. Icon name not changed
622 E The text may not begin with an icon code ('@' replaced by '#')
623 E Icon & not permitted for this object type (icon name not changed)
624 E Unable to compare attribute name &->& against the class library
625 E Field name & is not a valid class attribute name ('->' missing)
626 E Format & does not fit property formt &
627 E Format & of the Dictionary field & does not fit the property format &
628 E Function code may not begin with a slash ('/' removed)
650 E Unable to adapt variable step loop. Screen size not changed
653 E Collision at target location (element not placed)
654 E Screen limits exceeded (element not placed)
655 E Collision at target location. Group not placed
656 E Collision at target dest. because font too small (element not placed)
661 E Unable to get command field & from ABAP Dictionary
662 E XSynchronize switched off
664 E No objects read
665 E Screen size & is too small. Size not changed
666 E Screen size & is too large. Size not changed
667 E Element(s) lie outside new limits (screen size not changed)
668 E Step loop too short. Screen size not changed
669 E Variable step loop too short. Screen size not changed
670 E Unable to save screen in file
671 E Screen saved in file
672 E XSynchronize switched on. Switch off with CTRL x
673 E A variable step loop has already been defined
674 E Fixed step loops not allowed next to variable ones (steploop not created)
675 E Element name & is already in use (text not copied)
676 E Name(s) already in use. Use elements with different names?
700 E Neither template nor text switched on
701 E Cannot transfer to test mode
702 E ABAP Dictionary table must be specified precisely
703 E Field & is either blank, not allowed or already in the element list
704 E Fields are either blank, not allowed or already in element list
705 E Input/output field & has no name
706 E Field(s) already exist in the field list
707 E Field & is too long (it has been shortended to & bytes)
708 E Selection contains fields that cannot be taken over
709 E Selection not possible in display mode
720 E Type not allowed for a title strip element in a tab
721 E Type not allowed for a page element in a tab
722 E No tab page selected
723 E De-referenced page element deleted
724 E Collision with page element in tab
728 E Unable to find page element &. Reference not copied
730 E This type is not permitted for an element in a databound control
750 E Maximum element size exceeded
751 E Element too short
752 E Collision at target location (element not moved)
753 E Unable to delete command in command field
754 E Screen limit exceeded (element not moved)
755 E Field overlapped or bordered
756 E Screen or window limit reached
758 E Fixed step loops not allowed next to variable ones (step loop not moved)
759 E Icon name is blank
760 E Element can only be an output field, not an input field
761 E No text allowed with status icon
762 E Internal error: Screen for icon & unknown in Screen Painter
763 E Collision at target location (element truncated and made scrollable)
764 E You cannot change container in modification mode
765 E & is a CHAR field of length 1, Convert to
766 E Element name too long (max. & characters)
770 E No blank line for margin.
771 E No blank column found for box.
772 E Text field is empty (unable to convert it)
773 E Pushbutton is blank.
774 E Pushbutton icon does not match text.
775 E Reference element & not found
780 E Selection contains no element
781 E Collision at target location. Group not moved
782 E Screen limit exceeded (group not moved)
785 E Group must contain at least 2 pushbuttons
786 E Group can only contain radio buttons
788 E Fixed step loops not allowed next to variable ones (group not moved)
789 E Nested step loops are not allowed (step loop not created)
790 E Radio button does not have field name (unable to create group)
791 E Collision at target location (& field(s) truncated or not copied)
792 E Elements of a group are in different containers
793 E Elements of a group of radio buttons in different containers
800 E Increment for multiple step loop is too small. Step loop not changed
801 E Step loop size too small
802 E Step loop size too large
803 E Collision at target location. Step loop not moved
804 E Step loop contains an invalid element for table control (no conversion)
805 E Overlapping step loops
806 E Conversion not possible
807 E Not enough space for step loop
808 E Step loop size too small
809 E Fixed step loop not allowed next to a variable (step loop unchanged)
810 E Terminates creation of new screen element
811 E Creates a new text field on the screen
812 E Creates a new input/output field on the screen
813 E Creates a new pushbutton on the screen
814 E Creates a new checkbox on the screen
815 E Creates a new radio button on the screen
816 E Creates a new box on the screen
817 E Creates a new subscreen on the screen
818 E Creates a new table control on the screen
819 E Creates a new input/output field for a status icon on the screen
820 E &
821 E Place the text field on the screen
822 E Place the input/output field on the screen
823 E Place the pushbutton on the screen
824 E Place the checkbox on the screen
825 E Place the pushbutton on the screen
826 E Place the box on the screen
827 E Place the subscreen on the screen
828 E Place the table control on the screen
829 E Place the input/output field on the screen
830 E Place the element on the screen
831 E Place the group on the screen
832 E Group selection contains unplaced elements
833 E Selection cannot contain unplaced elements (element(s) excepted)
834 E Element exists in already selected element (element not selected)
835 E Element contains already selected element (element not selected)
836 E Element(s) not visible in container (unable to select element(s))
837 E Character & not allowed in element names
838 E Do you want the element to have an ABAP Dictionary reference
839 E Element name may not consist only of digits
840 E Creates a new custom control on the screen
841 E Place the custom control on the screen
842 E Creates a new tabstrip control on the screen
843 E Place the tabstrip control on the screen
844 E Creates a new databound control on the screen
845 E Place the databound control on the screen
846 E Calls the Wizard to create a new table control on the screen
847 E Place the table control on the screen (Wizard follows)
848 E Calls the Wizard to create a new tabstrip on the screen
849 E Place the tabstrip on the screen (Wizard follows)
850 E Collision in table control (element not included)
851 E Invalid element for table control (conversion not possible)
852 E Header element in table control shortened
853 E Falls short of minimum table control height
854 E Falls short of table control width
855 E Invalid type for header element in table control
856 E Invalid type of column element in table control
857 E Collision with header element in table control
858 E No column for header element in table control
859 E Header element deleted
860 E Header element(s) deleted
861 E Header element also deleted
862 E Header element(s) also deleted
863 E Table control still contains elements. Delete?
864 E Do you really want to delete the title element?
865 E Do you really want to delete the header element?
866 E Do you really want to delete the header elements?
867 E The header element will also be deleted. Delete?
868 E The header elements will also be deleted. Delete?
869 E Create a title element for the table control
870 E Create header elements for the table control
871 E Specify a name for the line selection element
872 E Creates a new online help pushbutton on the screen
873 E Place the online help pushbutton on the screen
875 E Node was not found
881 E Data for screen & & not found
882 E Connection to SAP System lost. Program terminated
883 E Function not available in test mode
884 E &
885 E Unable to format data. Exit program?
886 E Unable to transfer data. Exit program?
887 E Internal error while exchanging data. Exit program?
888 E Table controls not supported in graphical layout editor until Release 30C
889 E Windowing system &1 not supported in graphical layout editor
890 E Offers icons for selection
891 E Character string not found
898 E Function not yet implemented
899 E This can be created using 'Web Dynpro Builder' ('Change View...')
900 E Internal error messages in error log file
901 E Data for screen & & not found
902 E Connection to SAP System lost
903 E Function not available in test mode
904 E &
998 E Function not yet implemented