000 |
D |
****** Allgemeines ****************************************************** |
001 |
D |
Verbuchung nur möglich durch Verteilungseinheit &1 |
002 |
D |
&1 |
003 |
D |
Von &1 nach &2 kann &3 laut Verteilungsmodell nicht verteilt werden |
004 |
D |
Nachricht zu Verteilungspaket &1 wurde erfolgreich eingebucht |
005 |
D |
Es kann nur jeweils ein Verteilungspaket verbucht werden |
006 |
D |
Syntax-Fehler in Nachricht: Keine Kopfinformationen zum Paket vorhanden |
007 |
D |
Keine Nachricht übergeben |
008 |
D |
Fehler bei der Eingangsverarbeitung des Verteilungspakets |
009 |
D |
Objekt-Nachricht ist in Verteilungseinheit &1 obsolet |
010 |
D |
Quittung zu Verteilungseinheit &1 wurde eingebucht |
011 |
D |
Verteilungspaket &1 ist nicht vorhanden |
012 |
D |
Es kann nur jeweils eine Quittung verarbeitet werden |
013 |
D |
&1 Nachrichten aufgebaut |
014 |
D |
Fehler bei der Statusänderung des Verteilungspakets |
015 |
D |
Fehler beim Schreiben des Anwendungs-Logs |
016 |
D |
Job &1 mit der ID &2 angelegt |
030 |
D |
****** Application-Log (DSPACKAGE - OUTBOUND) *************************** |
031 |
D |
Instanz &1 für Paket &2 |
032 |
D |
Bearbeite Instanz &1 : &2 |
034 |
D |
Prüfung der Objektliste (&1 Objekte) : |
035 |
D |
&1, '&2 &3' (&4) |
036 |
D |
....Keine Nachricht wurde erzeugt |
037 |
D |
....Für den Korrektureintrag wird eine Funktion benötigt (I, U, D) |
038 |
D |
....Nachricht &1 wurde erzeugt |
044 |
D |
Aufbau der Nachrichten (&1 Objekte) : |
046 |
D |
....Objekte des Objekttyps &1 werden nicht von Paketen verteilt |
047 |
D |
....Fehler in der Ausgangsverarbeitung des Objekttyps &1 |
048 |
D |
....Es konnte keine Instanz des Objektyps &1 erzeugt werden |
060 |
D |
...Fehler im asynchronen RFC: Abbruch der Ausgangsverarbeitung. |
080 |
D |
****** Application-Log (DSPACKAGE - INBOUND) **************************** |
081 |
D |
Verarbeite Verteilungseinheit aus folgenden Paketen : |
082 |
D |
..Korrekturpaket &1 |
083 |
D |
..Originalpaket &1 |
089 |
D |
.. &1, '&2 (&3)' : Wurde mit Warnung verbucht (Status &4) |
090 |
D |
Objekte der Hierarchieebene &1 : |
091 |
D |
..Fehlerhafte Objekte vorhanden. |
092 |
D |
.. &1, '&2 (&3)' : Keine Nachricht gefunden |
093 |
D |
.. &1, '&2 (&3)' : Ist bereits verarbeitet (Status 53) |
094 |
D |
.. &1, '&2 (&3)' : Wurde erfolgreich vearbeitet (Status &4) |
095 |
D |
.. &1, '&2 (&3)' : Fehler in der Verarbeitung (Status &4) |
096 |
D |
.. &1, '&2 (&3)' : Wurde auf 'obsolet' gesetzt (Status &4) |
097 |
D |
Vorgänger-Einheit &1 ist noch nicht eingebucht |
098 |
D |
Nachverbuchen der Objekte des Typs &1: |
099 |
D |
Es wird nur die manuelle Selektion verbucht |
100 |
D |
Verteilungspaket &1 erhält folgenden Status: &2 |
101 |
D |
.. &1, '&2 (&3)' : Bereits Fehler in Objektinstanz |
150 |
D |
****** API- / DB-Schnittstelle ****************************************** |
151 |
D |
Paket ist freigegeben, Nur Verteilungs-/Statusinformationen änderbar |
152 |
D |
Kopfdaten des Verteilungspakets sind unvollständig |
153 |
D |
Nicht alle Objekte einem Objekttyp zugeordnet |
154 |
D |
Doppelte Einträge werden aus der Objektliste entfernt |
155 |
D |
Kein vollständiger Bezug der Korrektur zum Originalpaket vorhanden |
156 |
D |
Originalpaket &1 ist nicht vorhanden |
157 |
D |
Originalpaket &1 kann noch ohne Korrektur geändert werden |
158 |
D |
Keine Änderungen des verbuchten Verteilungspakets &1 möglich |
159 |
D |
Ungleiche Verteilungsrichtung von Korrektur- (&1) und Originalpaket (&2) |
160 |
D |
Zum Originalpaket &1 existiert noch die offene Korrektur &2 |
161 |
D |
Für Objekte in Korrekturen ist eine Änderungsfunktion vorgeschrieben |
162 |
D |
Es wird die Verteilungspaketnummer &1 verwendet |
163 |
D |
Objekttyp &1 ist nicht vorhanden |
164 |
D |
Verteilungsrichtung &1 unbekannt (Ausgang = 1, Eingang = 2) |
165 |
D |
Korrekturpaket ist bereits Original &1 zugeordnet |
166 |
D |
Paketart &1 unbekannt ('O' : Originalpaket, 'C' : Korrekturpaket) |
167 |
D |
Objekttyp &1 ist in Einheiten des Typs &2 nicht verteilbar |
168 |
D |
Verteilungsmodell erlaubt keine Verteilung von Paketen nach &1 |
169 |
D |
Keine Änderungen des abgelehnten Verteilungspakets &1 möglich |
170 |
D |
Verteilungspaket-Typ &1 ist nicht vorhanden |
171 |
D |
>>>> Verarbeitung in Funktionsbaustein &1 |
172 |
D |
<<<< Verarbeitung in Funktionsbaustein &1 |
173 |
D |
Es konnte keine Verteilungspaket-Nummer vergeben werden |
174 |
D |
Änderungen am Verteilungspaket &1 werden verbucht |
175 |
D |
Eigentümer '&1' ist nicht erlaubt ('L': lokales Sytem , 'R': Partner) |
176 |
D |
Verteilungspaket &1 existiert bereits |
177 |
D |
Lokale Korrekturen im Eingang dürfen nur Objekte löschen |
178 |
D |
Vorgängerpaket &1 der Korrektur existiert nicht |
179 |
D |
Paketname &1 wird in der Einheit bereits verwendet |
180 |
D |
Nach &1 existieren noch weitere Korrekturen zum Originalpaket &2 |
181 |
D |
Eingehende Verteilungspakete müssen ihre Nachrichten-Nummer enthalten |
182 |
D |
Status &1 ist für die Richtung &2 des Verteilungspakets nicht vorgesehen |
183 |
D |
Pakettyp &1 der Verteileinheit erlaubt keine Korrekturen |
184 |
D |
Pakettyp &1 der Verteileinheit erlaubt keine Korrekturen im Zielsystem |
185 |
D |
Quittung an das Quellsystem &1 gesandt |
186 |
D |
Quittung konnte nicht an das Quellsystem &1 gesandt werden |
187 |
D |
Der zugeordnete Middlewaretyp &2 erlaubt keine Verteilung nach &3 |
188 |
D |
Ungültige Änderungsfunktion &1 des Objektes {'I', 'U', 'D'} |
189 |
D |
Zur Objektinstanz des Verteilungspakets existieren noch keine Daten |
190 |
D |
Schlüsselfelder &1 werden von der Instanz übernommen |
191 |
D |
Paketart &1 wird von der Instanz übernommen |
192 |
D |
Paket &1 ist bereits freigegeben, Löschung ist nicht mehr möglich |
193 |
D |
Vorgängerpaket &1 wurde noch nicht verteilt |
194 |
D |
Paketschlüssel entspricht nicht dem der aktuellen Instanz |
195 |
D |
Es können nur Pakete mit Richtung '1' (Ausgang) verteilt werden |
196 |
D |
Paket wurde bereits verteilt |
197 |
D |
System verteilt nur freigegebene Pakete |
198 |
D |
Status &1 wird intern vergeben und kann nicht extern gesetzt werden |
199 |
D |
Es existiert kein änderbares Paket in der Verteilungseinheit |
201 |
D |
Intervall für Nummernkreisobjekt &1 konnte nicht angelegt werden |
202 |
D |
Nur eingehende Pakete verarbeitbar |
203 |
D |
Nicht alle Pakete freigegeben und genehmigt |
204 |
D |
Paket ist gesperrt, Nur Verteilungs-/ Statusinformationen änderbar |
205 |
D |
Verteilungseinheit muß zuerst genehmigt werden |
206 |
D |
Verteilungspaket wurde nur zur Anzeige instanziiert |
207 |
D |
Verteilungseinheit wurde nur zur Anzeige instanziiert |
208 |
D |
Verteilungseinheit existiert bereits |
209 |
D |
Verteilungseinheit ist nicht vorhanden |
210 |
D |
Objektschlüssel angeben |
211 |
D |
Objekttyp angeben |
212 |
D |
Paket &1 ist nicht in der Einheit enthalten |
213 |
D |
Pakettyp &1 des Originalpakets erlaubt keine Korrekturen im Quellsystem |
214 |
D |
Paketname &1 ist für die externe Nummernvergabe nicht zugelassen |
215 |
D |
Service wird vom Objekttyp &1 nicht angeboten |
216 |
D |
Objekt ist bereits in der Einheit enthalten und wird aktualisiert |
217 |
D |
Bisherige Eintrag zu diesem Objekt wird gelöscht |
218 |
D |
Einheit ist eingebucht oder abgelehnet, Nur noch Anzeige möglich |
219 |
D |
Service wird von der Middleware &1 nicht angeboten |
221 |
D |
Kein Objekt selektiert |
222 |
D |
Nur Objekte freigegebener Pakete berücksichtigt |
223 |
D |
Original ist nicht freigegeben |
224 |
D |
Instanz &1 kann nicht wiederhergestellt werden |
225 |
D |
Keine Berechtigung zum Anlegen des Verteilungspakets |
226 |
D |
Keine Berechtigung zum Ändern des Verteilungspakets |
227 |
D |
Keine Berechtigung zum Anzeigen des Verteilungspakets |
228 |
D |
Keine Berechtigung zum Löschen des Verteilungspakets |
229 |
D |
Funktionsaufruf wurde mit Fehler beendet. |
230 |
D |
Verteilungspaket existiert bereits |
231 |
D |
Verteilungspaket ist nicht vorhanden |
232 |
D |
Instanz &1 für Einheit |
233 |
D |
Job &1, ID &2 ist zu dieser Einheit bereits eingeplant |
234 |
D |
Datum für die Jobeinplanung muß in der Zukunft liegen |
235 |
D |
Objekt &1, '&2 (&3)' ist nicht verteilbar |
236 |
D |
Parameter für den Batch-Job sind unvollständig |
237 |
D |
Verbuchung wird nach Serialisierungsebene &1 regulär abgebrochen |
238 |
D |
Objektschlüssel &1, '&2 (&3)' ist unvollständig |
239 |
D |
Vervollständigt wurde : &1, '&2 (&3)' |
240 |
D |
Quellobjekte können nur im Originalpaket angegeben werden |
241 |
D |
Objekttyp &1 ist für Quellobjekte nicht vorgesehen |
242 |
D |
Objekt &1, '&2 (&3)' kann nicht als Quellobjekt verwendet werden |
243 |
D |
Das Objekt ist bereits in der Liste vorhanden |
244 |
D |
Geben Sie eine Objektgültigkeit an |
245 |
D |
Abgleich mit der Replikations-Tabelle schlug fehl |
246 |
D |
Replikations-Tabelle wurde erfolgreich aktualisiert |
247 |
D |
Fehler beim aktualisieren der Replikations-Tabelle |
248 |
D |
Replikations-Tabelle filterte keine Objekte aus |
249 |
D |
Folgende Objekte wurden durch die Replikations-Tabelle ausgefiltert: |
250 |
D |
&1, '&2 (&3)' |
251 |
D |
Vorgänger-Einheiten können nur im Originalpaket angegeben werden |
252 |
D |
Der Name der Vorgängereinheit muß angegeben werden |
253 |
D |
Vorgänger-Verteilungseinheit &1 existiert nicht |
254 |
D |
Doppelte Einträge wurden aus der Vorgänger-Liste entfernt |
255 |
D |
Verteilungseinheit darf sich selbst nicht als Vorgänger haben |
256 |
D |
.. Weitere Verbuchung der fehlerhaften Instanz(en) wird abgebrochen |
257 |
D |
Serialisierung wurde aktalisiert, Paket kann nun freigegeben werden |
258 |
D |
Freigabe des Pakets wurde abgebrochen |
259 |
D |
Identifizierung der Objekt-Nachrichten ist erfolgt |
260 |
D |
Genehmigung der Einheit wurde abgebrochen |
261 |
D |
Angegebene Gültigkeit wurde korrigiert |
262 |
D |
'Strenge Serialisierung' und 'Nachverbuchbarkeit' schließen sich aus |
263 |
D |
Fehler in der Job-Verwaltung |
264 |
D |
Korrektur kann nur in Einheiten des Typs &1 eingefügt werden |
265 |
D |
Serialisierungsebenen wurden neu berechnet |
266 |
D |
&1 Nachrichten wurden noch nicht ans Zielsystem übergeben |
267 |
D |
&1 Nachrichten wurden noch nicht identifiziert |
268 |
D |
Objekt &1, '&2 &3' ist nicht gültig |
269 |
D |
Objekt kann nicht angezeigt werden |
270 |
D |
Objekt kann nur mit Änderungsnummer gelöscht (deaktiviert) werden |
271 |
D |
Es wurden alle Nachrichten an das Zielsystem übergeben |
272 |
D |
Es wurden alle Nachrichten identifiziert |
273 |
D |
Die Segmentdefinition &1 ist nicht vorhanden |
274 |
D |
Das UPS wurde erfolgreich eingerichtet |
275 |
D |
Keine Berechtigung zum Anlegen des UPS-Customizings |
276 |
D |
Keine Berechtigung zum Ändern des UPS-Customizings |
277 |
D |
Keine Berechtigung zum Anzeigen des UPS-Customizings |
278 |
D |
Keine Berechtigung zum Löschen des UPS-Customizings |
300 |
D |
****** DYNPO-Verarbeitung *********************************************** |
301 |
D |
Kein Protokoll : Fehlerinformation im Text des Nachrichten-Status |
302 |
D |
Nur Originalpakete erlaubt, Original zum Korrekturpaket wird selektiert |
303 |
D |
Verteilungseinheit &1 wurde gelöscht |
304 |
D |
Korrekturpaket &1 wurde gelöscht |
330 |
D |
******** Serialisierungsengine ****************************************** |
331 |
D |
FUB &: Serialisierungsgraph ist zyklisch (rekursiv) |
332 |
D |
FUB &: Serialisierungsgraph ist inkonsistent |
490 |
D |
******** PROCESS FLOW *************************************************** |
491 |
D |
Automatische Freigabe wird durchgeführt... |
492 |
D |
Automatisches Senden wird durchgeführt... |
493 |
D |
Automatische Genehmigung wird durchgeführt... |
494 |
D |
Automatische Einbuchung wird durchgeführt... |
500 |
D |
******** CUSTOMIZING **************************************************** |
501 |
D |
Objekttyp muß einer Verwendung zugeordnet sein |
502 |
D |
Geben Sie eine Beschreibung ein |
503 |
D |
Zur Sprache &1 ist bereits eine Beschreibung gepflegt |
504 |
D |
Objekttyp &1 wird noch in Pakettypen verwendet |
505 |
D |
DDIC-Struktur &1 ist nicht vorhanden |
506 |
D |
Nachrichtentyp &1 ist nicht vorhanden |
507 |
D |
IDoc-Typ &1 ist nicht vorhanden |
508 |
D |
Objekttyp &1 wurde gesichert |
509 |
D |
Geben Sie einen Objektyp ein |
510 |
D |
Objekttyp &1 existiert bereits |
511 |
D |
Zugehörige Service wird entfernt |
512 |
D |
Geben Sie einen Nachrichtentyp ein |
513 |
D |
Geben Sie einen IDoc-Typ ein |
514 |
D |
Objekttyp &1 wurde gelöscht |
515 |
D |
Zuerst Dynpro &1 berarbeiten |
516 |
D |
Keine Berechtigung zum Ändern |
517 |
D |
Keine Berechtigung zum Anzeigen |
520 |
D |
Geben Sie einen Pakettyp ein |
521 |
D |
Pakettyp &1 existiert bereits |
522 |
D |
Pakettyp &1 wurde gesichert |
523 |
D |
Pakettyp &1 wurde gelöscht |
524 |
D |
Pakettyp &1 wird bereits in Verteilungseinheiten verwendet |
525 |
D |
Objekttyp &2 wird bereits in Paketen des Typs &1 verwendet |
526 |
D |
Objekttyp &1 wird bereits in Verteilungspaketen verwendet |
527 |
D |
Die Verbuchung wird abgebrochen |
528 |
D |
Änderungen an diesen Einstellungen sind nicht erlaubt |
529 |
D |
Pakettyp &1 wird Middleware-Typ &2 zugewiesen |
532 |
D |
Die zentralen Einstellungen wurden gesichert |
600 |
D |
Es entsprachen keine Einheiten den Selektionskriterien! |
895 |
D |
|
896 |
D |
|
897 |
D |
|
898 |
D |
|
899 |
D |
&1 &2 &3 &4 |
000 |
E |
****** General ****************************************************** |
001 |
E |
Posting only possible with ALE distribution unit &1 |
002 |
E |
&1 |
003 |
E |
From &1 to &2, &3 cannot be distributed according to the distrib. model |
004 |
E |
ALE distribution packet &1 has been successfully posted |
005 |
E |
Only one distribution packet can be posted at a time |
006 |
E |
Syntax error in message: No header information available for the packet |
007 |
E |
No message has been transferred |
008 |
E |
Error while processing the inbound distribution packet |
009 |
E |
Object message is obsolete in ALE distribution unit &1 |
010 |
E |
Receipt for ALE distribution unit &1 was posted |
011 |
E |
ALE distribution packet &1 does not exist |
012 |
E |
Only one receipt at a time can be processed |
013 |
E |
&1 messages created |
014 |
E |
Error while changing the status of the ALE distribution packet |
015 |
E |
Error writing application log |
016 |
E |
Job &1 created with ID &2 |
030 |
E |
****** Application Log (DSPACKAGE - OUTBOUND) *************************** |
031 |
E |
Instance &1 for packet &2 |
032 |
E |
Processed instance &1: &2 |
034 |
E |
Object list check (&1 objects) : |
035 |
E |
&1, '&2 &3' (&4) |
036 |
E |
....No message has been created |
037 |
E |
... A function (I, U, D) is required for the correction entry |
038 |
E |
....Message &1 has been created |
044 |
E |
Generation of messages (&1 objects): |
046 |
E |
....Objects of object type &1 are not distributed by packets |
047 |
E |
....Error in the outbound processing of object type &1 |
048 |
E |
....An instance of object type &1 could not be created |
060 |
E |
Error in asynchronous RFC, output processing canceled |
080 |
E |
****** Application Log (DSPACKAGE - INBOUND) **************************** |
081 |
E |
Processed ALE distribution unit from following packets: |
082 |
E |
..Correction packet &1 |
083 |
E |
..Original packet &1 |
089 |
E |
.. &1, '&2 (&3)': Posted with warning (status &4) |
090 |
E |
Objects in hierarchy level &1 : |
091 |
E |
..Objects containing errors exist. |
092 |
E |
.. &1, '&2 (&3)': No message found |
093 |
E |
.. &1, '&2 (&3)' : Already processed (status 53) |
094 |
E |
.. &1, '&2 (&3)' : Successfully processed (status &4) |
095 |
E |
.. &1, '&2 (&3)' : Error during processing (status &4) |
096 |
E |
.. &1, '&2 (&3)' : Set to 'obsolete' (status &4) |
097 |
E |
Preceding unit &1 is not yet posted |
098 |
E |
Reposting of object of type &1: |
099 |
E |
Only the manual selection is posted |
100 |
E |
ALE distribution packet &1 contains the following status: &2 |
101 |
E |
.. &1, '&2 (&3)' : Already errors in object instance |
150 |
E |
****** API / DB Interface ****************************************** |
151 |
E |
Packet is released, only distribution/status information can be changed |
152 |
E |
Header data of the distribution packet is incomplete |
153 |
E |
Not all objects assigned to an object type |
154 |
E |
Duplicated entries are removed from the object list |
155 |
E |
No complete reference to the correction for the original packet available |
156 |
E |
Original packet &1 does not exist |
157 |
E |
Original packet &1 can still be changed without correction |
158 |
E |
The updated ALE distribution packet &1 cannot be changed |
159 |
E |
Distribution direction of correction (&1) and original packet (&2) differ |
160 |
E |
The open correction &2 is still available for original packet &1 |
161 |
E |
A change function is stipulated for objects in corrections |
162 |
E |
ALE distribution packet number &1 is being used |
163 |
E |
Object type &1 does not exist |
164 |
E |
Distribution direction &1 not known (outbound - 1, inbound - 2) |
165 |
E |
Correction packet is already assigned to original packet &1 |
166 |
E |
Packet type &1 not known ('O': Original packet, 'C': Correction packet) |
167 |
E |
Object type &1 cannot be distributed into units of type &2 |
168 |
E |
Distribution model does not allow any distribution of packets to &1 |
169 |
E |
No changes can be made to the rejected ALE distribution packet &1 |
170 |
E |
Distribution packet type &1 does not exist |
171 |
E |
>>>> Processing in Function Module &1 |
172 |
E |
<<<< Processing in Function Module &1 |
173 |
E |
An ALE distribution packet number could not be assigned |
174 |
E |
Changes to ALE distribution packet &1 posted |
175 |
E |
Owner '&1' is not allowed ('L': Local system, 'R': Partner) |
176 |
E |
ALE distribution packet &1 already exists |
177 |
E |
Local corrections in inbound processing can only delete objects |
178 |
E |
Predecessor packet &1 of correction does not exist |
179 |
E |
Packet name &1 is already used in the unit |
180 |
E |
After &1 there are still more corrections for original packet &2 |
181 |
E |
Inbound ALE distribution packets must include message numbers |
182 |
E |
Status &1 is not intended for direction &2 of the distribution packet |
183 |
E |
Packet type &1 of distribution unit does not allow corrections |
184 |
E |
Packet type &1 of dist. unit does not allow corrections in target system |
185 |
E |
Receipt sent to source system &1 |
186 |
E |
Receipt could not be sent to source system &1 |
187 |
E |
The assigned middleware type &2 does not allow distribution to &3 |
188 |
E |
Invalid change function &1 of object {'I', 'U', 'D'} |
189 |
E |
No data exists for the object instance of the ALE distribution packet |
190 |
E |
Key fields &1 are accepted by the instance |
191 |
E |
Packet type &1 adopted by the instance |
192 |
E |
Packet &1 has already been released and can no longer be deleted |
193 |
E |
Preceding packet &1 has not been distributed |
194 |
E |
Packet key does not correspond to the current instance |
195 |
E |
Only packets with direction '1' (outbound) can be distributed |
196 |
E |
Packet has already been distributed |
197 |
E |
System only distributes released packets |
198 |
E |
Status &1 is assigned internally and cannot be set externally |
199 |
E |
No packet in the distribution unit can be changed |
201 |
E |
Interval for number range object &1 could not be created |
202 |
E |
Only inbound packets can be processed |
203 |
E |
Not all packets released and approved |
204 |
E |
Packet is locked, only distribution/status information can be changed |
205 |
E |
Distribution unit must first be approved |
206 |
E |
Distribution packet has been instantiated for display only |
207 |
E |
Distribution unit has been instantiated for display only |
208 |
E |
Distribution Packet Already Exists |
209 |
E |
Distribution unit does not exist |
210 |
E |
Specify object key |
211 |
E |
Specify object type |
212 |
E |
The unit does not contain packet &1 |
213 |
E |
Packet type &1 of original packet allows no corrections in source system |
214 |
E |
Packet name &1 is not allowed for external number assignment |
215 |
E |
Service is not offered by object type &1 |
216 |
E |
Object is already in the unit and is updated |
217 |
E |
Previous entry for this object is deleted |
218 |
E |
Unit is posted or rejected, you can only display the unit |
219 |
E |
The service is not provided by the middleware &1 |
221 |
E |
No object selected |
222 |
E |
Only objects of released packets taken into account |
223 |
E |
Original is not released |
224 |
E |
Instance &1 cannot be recreated |
225 |
E |
Not authorized to create an ALE distribution packet |
226 |
E |
Not authorized to change an ALE distribution packet |
227 |
E |
Not authorized to display an ALE distribution packet |
228 |
E |
Not authorized to delete an ALE deletion packet |
229 |
E |
Function call terminated with errors |
230 |
E |
Distribution packet exists already |
231 |
E |
Distribution packet does not exist |
232 |
E |
Instance &1 for unit |
233 |
E |
Job &1, ID &2 is already scheduled for this unit |
234 |
E |
Date for job scheduling must be in the future |
235 |
E |
Object &1, '&2 (&3)' cannot be distributed |
236 |
E |
Parameters for the batch job are incomplete |
237 |
E |
Posting is stopped after serialization level &1 |
238 |
E |
Object key &1, '&2 (&3)' is incomplete |
239 |
E |
&1, '&2 (&3)' were completed |
240 |
E |
Source objects can only be entered in the original packet |
241 |
E |
Object type &1 is not planned for source objects |
242 |
E |
Object &1, '&2 (&3)' cannot be used as a source object |
243 |
E |
Object already in the list |
244 |
E |
Enter an object validity |
245 |
E |
Comparision with replication table failed |
246 |
E |
Replication table has been successfully updated |
247 |
E |
Error occurred while updating the replication table |
248 |
E |
No objects are filtered out by the replication table |
249 |
E |
Following objects have been filtered out by the replication table: |
250 |
E |
&1, '&2 (&3)' |
251 |
E |
Preceding units can only be entered in the original packet |
252 |
E |
The name of the preceding unit must be entered |
253 |
E |
Preceding distribution unit &1 does not exist |
254 |
E |
Duplicated entries were removed from the list of predecessors |
255 |
E |
Distribution unit cannot have itself as a predecessor |
256 |
E |
.. Further posting of the instance(s) containing errors cancelled |
257 |
E |
Serialization was updated, packet can now be released |
258 |
E |
Release of packet was cancelled |
259 |
E |
Object messages have been identified |
260 |
E |
Approval of unit has been cancelled |
261 |
E |
Specified validity was corrected |
262 |
E |
Strict Serialization and 'Repostability' are mutually exclusive |
263 |
E |
Error in job administration |
264 |
E |
Correction can only be inserted in units of type &1 |
265 |
E |
Serialization levels have been recalculated |
266 |
E |
&1 messages have not yet been transferred to the target system |
267 |
E |
&1 messages have not yet been identified |
268 |
E |
Object &1, '&2 &3' is not valid |
269 |
E |
Object cannot be diplayed |
270 |
E |
Object can only be deleted (deactivated) with change number |
271 |
E |
All messages have been transferred to the target system |
272 |
E |
All messages have been identified |
273 |
E |
Segement definition &1 does not exist |
274 |
E |
UPS has been set up successfully |
275 |
E |
No authorization to create UPS Customizing |
276 |
E |
No authorization to change UPS Customizing |
277 |
E |
No authorization to display UPS Customizing |
278 |
E |
No authorization to delete UPS Customizing |
300 |
E |
****** Screen Processing ******************************************* |
301 |
E |
No log: Error information in text of the message status |
302 |
E |
Only original packets allowed, original of correction packet selected |
303 |
E |
Distribution unit &1 was deleted |
304 |
E |
Correction packet &1 was deleted |
330 |
E |
******** Serialization Engine ****************************************** |
331 |
E |
Function Module &: Serialization Graph is Cyclical (Recursive) |
332 |
E |
Function Module &: Serialization Graph is Inconsistent |
490 |
E |
******** PROCESS FLOW *************************************************** |
491 |
E |
Automatic release is being executed ... |
492 |
E |
Automatic sending is being executed ... |
493 |
E |
Automatic approval is executed ... |
494 |
E |
Automatic posting is being executed ... |
500 |
E |
******** CUSTOMIZING **************************************************** |
501 |
E |
Object type must be assigned to a usage |
502 |
E |
Enter a description |
503 |
E |
A description has already been entered for language &1 |
504 |
E |
Object type &1 is still used in packet types |
505 |
E |
DDIC structure &1 does not exist |
506 |
E |
Message type &1 does not exist |
507 |
E |
IDoc type &1 does not exist |
508 |
E |
Object type &1 was saved |
509 |
E |
Enter an object type |
510 |
E |
Object type &1 already exists |
511 |
E |
Related service removed |
512 |
E |
Enter a message type |
513 |
E |
Enter an IDoc type |
514 |
E |
Object type &1 was deleted |
515 |
E |
First edit screen &1 |
516 |
E |
You are not authorized to make changes |
517 |
E |
No display authorization |
520 |
E |
Enter a packet type |
521 |
E |
Packet type &1 already exists |
522 |
E |
Packet type &1 saved |
523 |
E |
Packet type &1 deleted |
524 |
E |
Packet type &1 is already used in distribution units |
525 |
E |
Object type &2 is already used in packets of type &1 |
526 |
E |
Object type &1 is already used in distribution packets |
527 |
E |
Posting is terminated |
528 |
E |
Changes to these settings are not allowed |
529 |
E |
Packet type &1 is assigned middleware type &2 |
532 |
E |
Central settings have been saved |
600 |
E |
No units corresponded to the selection criteria |
891 |
E |
|
892 |
E |
|
893 |
E |
|
894 |
E |
|
895 |
E |
|
896 |
E |
|
897 |
E |
|
898 |
E |
|
899 |
E |
&1 &2 &3 &4 |