Menu

SAP Message Class TA

Erweitertes Tabellenwesen (Auswertg, Customizg, clientcopy)

The Message Class TA (Erweitertes Tabellenwesen (Auswertg, Customizg, clientcopy)) is a standard Message Class in SAP ERP and is part of the package STRM.

Technical Information

Message Class TA
Short Text Erweitertes Tabellenwesen (Auswertg, Customizg, clientcopy)
Package STRM

Messages

ID Language Text
000 D Start im Hintergrund..................&
001 D Bitte geben Sie den Namen des Commandfiles ein
002 D Bitte geben Sie die Tabellenspezifikation ein
003 D Nur A/C/T für All/Commandfile/Tabelle möglich: &
004 D Keine mandantenabhängigen, transportierbaren Tabellen gefunden
005 D Commandfile enthält keine mandantenabhängigen Tabellen: &
006 D Keine Tabelleneinträge im Mandanten & für Tabelle & vorhanden
007 D Bitte geben Sie den Quellmandanten an
008 D Quellmandant nicht vorhanden: &
009 D Quellmandant gleich Anmeldemandant
010 D Kein abgebrochener Lauf für Restart vorhanden
011 D Mandant 000 ist geschützt und darf nicht überschrieben werden
012 D Parameter wurde nach dem letzten Lauf verändert
013 D Tabelle & ist nicht mandantenabhängig
014 D Kein Restart möglich, da beim Abbruch noch keine Tabellen kopiert waren
015 D Keine Berechtigung für Mandantenkopie
016 D Mandantenkopie wird durch anderen Mandantenkopie-Job gesperrt
017 D Keine Berechtigung zur Pflege von Benutzerstammdaten (S_USER_GRP)
018 D Keine Berechtigung zur Pflege von Berechtigungsprofilen (S_USER_PRO)
019 D Mandantenexport vom & &
020 D Nummernkreis-Reset....................&
021 D Selektierte Objekte : &
022 D Bearbeitete Objekte : &
023 D Quellmandant : &
024 D Zielmandant : &
025 D Zu bearbeitende Objekte : &
026 D Speicherbedarf in K Bytes : &
027 D Laufzeit in Sekunden : &
028 D Mandantenkopie vom & &
029 D SYSID.................................&
030 D SAP Release...........................&
031 D Host..................................&
032 D User..................................&
033 D Parameter
034 D Quellmandant..........................&
035 D Restart...............................&
036 D Tabellenselektion
037 D mit Anwendungsdaten...................&
038 D mit Benutzerstämmen...................&
039 D ohne HR Daten (Pers.wirtschaft).......&
040 D Testmodus (ohne DB Update)............&
041 D Commandfile...........................&
042 D Tabellenliste.........................&
043 D Zielmandant...........................&
044 D Protkolldatei.........................&
045 D Protokollverzeichnis..................&
046 D auch Matchcodes ermitteln + kopieren..&
047 D Mandantenimport vom & &
048 D Interner Fehler: Modus nicht möglich, nur C/E/I erlaubt
049 D Keinen Mandantenkopie-Protokolleintrag gefunden zu Mandant: &
050 D Keine fehlerhaften Tabellen gefunden für Mandantenkopie: & &
051 D Interner Fehler: Phase & nicht bekannt
052 D Tabelle CCCFLOW kann nicht geändert werden (&1 in &2)
053 D TABNAME/FIELDNAME ungültig in CCCFINI: & &
054 D CCFTYPE ungültig in CCCFINI: &
055 D CCFTYPE in CCCFINI weicht von NAMETAB ab: & <<>> &(&)
056 D Tabelle & inaktiv in SAP-System, wird ignoriert
057 D WARNUNG: mehrfach abgebrochen
058 D WARNUNG: voller Lauf nach Abbruch
059 D Fehler: Schlüssel für Tabelle &1 ist nicht mandantenabhängig: &2
060 D Nur Einfügungen.......................&
061 D Bestätigung Kopieren
062 D Zu bearbeitende Objekte:
063 D Möchten Sie fortfahren?
064 D WARNUNG: Ungültige Laufzeitangabe
065 D >>> Phase & <<<
066 D Selektionsliste erstellt
067 D Fehler in GET_TABLE &
068 D Fehler in MOD_TABLE &
069 D Fehler in FIELD_INIT &
070 D DDIC und CCC Info geladen
071 D FLOW Info aktualisiert
072 D Exitprogramm & erfolgreich ausgeführt &
073 D POPUP Texte nicht gefunden
074 D Protokoll kann nicht geöffnet werden: &
075 D Protokoll kann nicht geschrieben werden (Server &1 , RC = &2)
076 D Nächste Korrekturnummer für Protokoll nicht erhalten: &
077 D &&&&
078 D Fehler beim Löschen des Commandfile &
079 D Schwere des Fehlers.....: &
080 D Fehlernummer............: &
081 D Name der Routine........: &
082 D Nachrichten_ID..........: &
083 D Nachrichtennummer.......: &
084 D Commandfile.............: &
085 D schon vorhanden (wird überschrieben)
086 D erstellt am.............: &
087 D von.....................: &
088 D Status..................: &
089 D Beim Schreiben des Transportauftrages & trat ein Fehler auf
090 D Commandfile geschrieben für & unter: & &
091 D Für Mandantentransport & Einträge in das Commandfile eingetragen
092 D mit mandantenunabhängigen Tabellen....&
093 D Systemdaten des Mandantenexports:
094 D Keine Felder in Tabelle & initialisiert
095 D Keine Einträge in Tabelle &
096 D & Tabellen ins Commandfile eingetragen
097 D Commandfilename & schon vorhanden
098 D Folgende Tabellen ins Commandfile aufgenommen:
099 D Kein Commandfile für & geschrieben
100 D Keine Transportnummer gefunden
101 D FEHLER: Ungültiger PROGTYPE in CCCEXIT: &
102 D FEHLER: Typ 'F' User Exit mit SYS_ERROR: &
103 D FEHLER: Kein Zugriff auf Tabelle zu User Exit: &
104 D WARNUNG: offene Korrektur zu Tabelle: & & &
105 D FEHLER: Exitprogramm & nicht gefunden, bzw. nicht ausführbar
106 D FEHLER: Report hat Syntaxfehler: &
107 D FEHLER: ungültiger E071 OBJFUNC Eintrag für Tabelle: & &
108 D & ausgeführt &(&) Einträge übernommen
109 D Fehler in &2: &1 Tabellenkeys zurückgewiesen, da Quellmandant falsch
110 D WARNUNG: Keine Einträge gefunden mit Komponente: &
111 D WARNUNG: Keine Einträge kopiert/transportiert mit Komponente: &
112 D & ausgeführt & Einträge gefunden
113 D & ausgeführt & Einträge kopiert
114 D Laufzeit & Sekunden
115 D Ein Mandantenkopie-Lauf ist zur Zeit aktiv
116 D FEHLER: Tabelle ist nicht aktiv: &
117 D FEHLER: Tabelle auf der Datenbank nicht vorhanden: &
118 D FEHLER: Customizingdaten Kopieren erfordert Neuinitialisierung
119 D FEHLER: SQL zum Einfügen in Tabelle & liefert Fehler: &
120 D FEHLER: SQL zum Löschen der Tabelle & liefert Fehler: &
121 D FEHLER: interner Fehler beim Einfügen in Tabelle: &
122 D FEHLER: interner Fehler beim Löschen Tabelle: &
123 D Siehe Dokumentation
124 D FEHLER: interner Fehler beim Zählen der Tabelleneinträge (Generierung)
125 D FEHLER: Maximale Fehleranzahl überschritten
126 D Tabelle & hat keine Felder, wird ignoriert
127 D FEHLER: Falscher Modus angegeben, nur C/E/I erlaubt
128 D Modus.................................&
129 D Tabelle & ist mandantenabhängig
130 D Bitte selektieren Sie ein Profil mit Customizing-Daten für den Export
131 D Benutzerstämme erfordern Benutzerprofile
132 D Beim Löschen wird automatisch das Profil 'DELETE' erzeugt
133 D Zielmandant ist produktiv und geschützt gegen Mandantenkopie
134 D Report RSCLXCOP kann nicht direkt gestartet werden, nur Batcheinplanung
135 D Keine Berechtigung zum Erzeugen v. Transportaufträgen für Mandantenexport
136 D Keine Berechtigung für systemübergreifenden Transport
137 D Transportprogramm tp konnte nicht gestartet werden (RC=&)
138 D Sprachentransportprogramm RSTXR3TR konnte nicht gestartet werden
139 D Fehler beim Bestimmen der Codepage-ID
140 D Tabelle & nicht kopiert, mehr als 500.000 Einträge
141 D Tabelle & (&) gleich und nicht kopiert
142 D FEHLER: Lesefehler im Mandanten: & Tabelle &
143 D FEHLER: Schreibfehler im Mandanten: & & Tabelle &
144 D FEHLER: Löschen nicht möglich im Mandanten: & Tabelle &
145 D WARNUNG: Tabelleneinträge grösser als &2 Bytes: &1
146 D Programmlauf mit Fehler oder Warnung beendet, Retcode: &
147 D FEHLER: Tabelle & in DB inkonsistent, siehe Data Dictionary
148 D Table Ins. Del. Upd. Func. kByte Time[sec] Time
149 D
150 D Tabellen mit Feldinitialisierung
151 D Programmlauf erfolgreich beendet.
152 D Ende der Bearbeitung : &
153 D FEHLER: Tabelle & ist nicht im Data Dictionary definiert
154 D Kopierte Tabelle: & SQL-Ausführung: &
155 D Initialisieren und Neuanlegen.........&
156 D Tabelle wurde via ABAP/4 Native SQL kopiert: &
157 D Remote-Verbindung kann nicht aufgebaut werden
158 D Fehler im Remotesystem &1 (&2), siehe SYSLOG des Remotesystem
159 D Kein Remotesystem angegeben
160 D Nicht ausgegebene Statistiken können beim Testlauf nicht ermittelt werden
161 D Verglichene Tabellen: &
162 D Wurde vom Kopieren ausgenommen: &
163 D Tabelle & nicht bearbeitet wegen Fehlerüberschreitung
164 D Tabelle & wurde wegen interner Fehler nicht kopiert
165 D Prozess & abgebrochen wegen fehlender Berechtigung
166 D Bitte wählen Sie einen anderen Profilnamen (Namensraum für Kunden = Z*)
167 D Bitte geben Sie einen Profilnamen ein
168 D Kopieren v. Anwendungsdaten nur mit Initialisieren und Neuanlegen möglich
169 D Restart-Option setzt das Restart-Profil
170 D Löschen von Profilen nur im Änderungs-Modus möglich
171 D Bitte geben Sie einen Profilnamen ein
172 D Gelöschte Tabellen : &
173 D Zu löschende Tabellen : &
174 D Hintergrundjob erfolgreich eingeplant, Protokoll wird in SCC3 angezeigt
175 D Hintergrundjob konnte nicht fehlerfrei eingeplant werden, Fehlernr: &
176 D Bitte wählen Sie ein gültiges Quellsystem aus
177 D Customizing-Daten.....................&
178 D Nachkopieren Fehler vom & &
179 D Aus dem Mandanten 000 werden keine Varianten kopiert
180 D Tabelle & wurde bereits selektiert
181 D Tabelle & exisitiert nicht
182 D Funktion nur für SAP verfügbar
183 D Datenbank & wurde bereits selektiert
184 D Restart nicht mit Testlauf möglich, starten Sie einen kompletten Lauf
185 D Kopierprofil:.........................&
186 D Devclass tables entries sec
187 D Profil konnte nicht in Transportauftrag aufgenommen werden
188 D Quellmandant Benutzerstämme...........&
189 D Tabelle &: Schlüssel: & in die Objektliste aufgenommen
190 D Lauf abgebrochen
191 D Program abnormal beendet
192 D & & wurde nicht richtig angegeben
193 D Kein Exporteintrag für Commandfile & gefunden
194 D Release von Export- und Import-System müssen identisch sein
195 D Release von Export- und Import-System müssen identisch sein
196 D Mandantenvergleich vom & &
197 D table devcl class Ziel Diff Quelle Einträge sec
198 D Unterschiedliche Tabellen
199 D Identische Tabellen
200 D File & nicht gefunden
201 D File unter & nicht möglich
202 D Systemeintrag für & in TSYST nicht gefunden
203 D Leeres File unter &
204 D Keine Schreibberechtigung für &
205 D Tabelle & ist nicht aktiv
206 D Keinen Text gefunden für Tabelle &
207 D Tabelle & hat keine Felder
208 D File & ist nicht vollständig
209 D Generischer Schlüssel ist zu groß
210 D Profil & nicht vorhanden
211 D Kopie der Customizing-Daten und Benutzerstämme erforderlich
212 D Keine Tabelleneinträge für Tabelle & gefunden
213 D Datenbankfehler beim Lesen der Tabelle &
214 D Profil wurde nicht gesichert, Speicherung als TMP
215 D Doppelter Schlüssel beim Einfügen in die Tabelle &
216 D Schlüssel zum Ändern in der Tabelle & nicht gefunden
217 D Schlüssel zum Löschen in der Tabelle & nicht gefunden
218 D Datenbankfehler beim Schreiben in der Tabelle &
219 D Bitte geben Sie eine R/3-Verbindung an
220 D Profil & ist bereits vorhanden
221 D Profil & kann nicht gespeichert werden
222 D SQL-Fehler & beim Bearbeiten der Tabelle &
223 D endian-Wert nicht möglich
224 D Angeforderte Zahlenumwandlung nicht möglich
225 D ZBV ist aktiv, Benutzerstämme werden nicht kopiert
226 D Der Mandant wurde noch nicht durch einen Datenimport erzeugt.
227 D Der Zielmandant enthält bereits Daten
228 D Mandantenunabhängige Daten sind geschützt
229 D Mandant ist im Importmodus, tp-import starten oder Importnachbearbeitung
230 D Die Protokollausgabe wird beendet, es werden noch Benutzerdaten gelöscht
231 D RFC-Fehler System: & Tabelle: & RC: &
232 D Keine RFC-Berechtigung im Zielsystem für Prozeß &
233 D Lese- oder Konvertierungsfehler System: & Tabelle: &
234 D Importnachbearbeitung ist noch nicht abgeschlossen
235 D Systemfehler - Abbruch
236 D Der View & ist nicht mandantenabhängig
237 D Die Profilausprägung ist bereits gespeichert
238 D Es sind nur numerische Mandanten erlaubt
239 D Zeitstempel: &
240 D Der Kopierlauf liegt mehr als eine Woche zurück
241 D Die logischen Systeme sind identisch
242 D Sie haben nicht die Berechtigung S_CLNT_IMP
243 D Sie haben nicht die Berechtigung zum Anlegen des Protokolls
244 D Benutzer mit Namen mit '*' dürfen keine Transportaufträge anlegen.
245 D Bitte geben sie einen Quellmandanten ein
246 D Der Eintrag in der Mandantentabelle wurde gelöscht
247 D Die Tabelle & wird nicht explizit, sondern mit Cluster & kopiert
248 D Der RFC-Login wurde in den falschen Zielmandanten gemacht
249 D Mit mandantenunabhängigem Customizing.&
250 D Es gibt & unkritische Unterschiede in den Tabellenstrukturen
251 D Es können & Tabellen nicht konvertiert werden
252 D Unkritische Unterschiede: konvertierbare Tabellen: &
253 D Unkritische Unterschiede: erweiterte Tabellen in diesem System: &
254 D Kritische Unterschiede: Fehlende Tabellen: &
255 D Unterschiedliche Tabellen: &
256 D Entw. Ausl. Einträge nur Daten nur
257 D Tabelle Klasse Klasse gesamt & diff. &
258 D Benutzerstämme werden nicht verglichen
259 D Der Import mandantenunabhängiger Daten in produktive Systeme ist verboten
260 D Der Quellmandant & ist gegen Datenexport durch Mandantenkopie gesperrt
261 D Tabelle hat im Zielsystem neue Spalten: &
262 D Tabelle hat konvertierbare Unterschiede: &
263 D Der Mandant ist gegen Datenimport per Mandantenkopie gesperrt
264 D Eine Profiländerung ist bei einem Restart nicht zulässig
265 D Die Mandantenkopie wird nun mit parallelen Prozessen fortgeführt
266 D Kopierfehler bei Tabelle & wurde behoben
267 D Kopierprozess & wurde nach Benutzerabbruch beendet
268 D Sie benutzen ein Profil, daß nicht von der SAP freigegeben wurde.
269 D Die angegebene RFC/Servergruppe & kann nicht benutzt werden
270 D Datenbankbereichsanalyse Stand: & &
271 D Bereich Frei(KB) Benötigt(KB)
272 D & &
273 D Es werden nur & Prozesse der RFC/Servergruppe & benutzt
274 D Wegen Problemen mit der Sperrverwaltung wurde der Prozess & beendet
275 D Zum Kopieren vom Mandanten 000 wird das Profil SAP_CUST empfohlen
276 D Der abgebrochene Lauf wird nicht mehr restartfähig sein
277 D Benutzer SAP* wurde gelöscht!
278 D Inklusive Aufgaben des Auftrages......&
279 D Es werden & Prozesse der RFC/Servergruppe & verwendet
280 D Die Tabelle & ist nur lokal vorhanden
281 D Längenänderung
282 D Die Tabelle & ist in das lokale System konvertierbar, Feld fehlt im RFC
283 D Die Tabelle & ist in das RFC-System konvertierbar, ein Feld fehlt lokal
284 D Die Tabelle & ist inkompatibel, Die Felder sind inkompatibel
285 D Die Tabelle & ist inkompatibel, es fehlen Felder in beiden Systemen
286 D Die Tabelle & ist komplett konvertierbar
287 D Die Tabelle & ist nur vom lokalen System in das RFC-System konvertierbar
288 D Die Tabelle & ist nur vom RFC-System in das lokale konvertierbar
289 D Die Tabelle & ist nur remote vorhanden
290 D Das Datenelement & ist inkompatibel
291 D Die Domäne & ist inkompatibel
292 D Profil SAP_RECO nicht erlaubt: Quellmandant <> Zielmandant
293 D Vorsicht: Änderungsbelege und lokale Tabellen werden kopiert
294 D Änderungsbelege werden nicht kopiert
295 D Testkopie - teilweise ohne Transaktionsdaten
296 D Es waren & Tabellen in der Ausnahmeliste
297 D Fehler: Tabelle & fehlerhaft im DDIC - Tabelle mit SE14 prüfen!
298 D Kopierte Daten in kBytes : &
299 D Gelöschte Daten in kBytes : &
300 D Unkritische Unterschiede
301 D Es wurden & unkritische Unterschiede gefunden
302 D Soll die Kopie gemacht werden?
303 D Tabellenerweiterungen
304 D Es wurden & Tabellenerweiterungen gefunden
305 D Fehlende Tabellen
306 D Es fehlen & Tabellen im Quellsystem
307 D Es fehlen Tabellendefinitionen in Zielsystem
308 D Tabellendefinition & fehlt im Zielsystem
309 D Tabellendefinition & fehlt im Zielsystem, ist aber generierbar
310 D Quellsystem & ist nicht vorhanden
311 D Prozess & gestartet auf Server & (Zeit: &)
312 D Prozess & ist fertig mit dem Kopieren der Daten & &
313 D Start: Synchronisation und Korrektur des Protokolls im Filesystem &
314 D Start: Nachkopieren Fehler & &
315 D Abbruch wegen Fehler bei Adresstabelle &
316 D Aktive Option: &
317 D Für RFC-Destination & ist kein Passwort gepflegt
318 D Mandantenabhängige Daten von & nach & kopieren?
319 D Die Tabellenart der Tabelle & ist nicht identisch
320 D Domäne & konnte nicht generiert werden
321 D Datenelement & konnte nicht generiert werden
322 D Tabelle & konnte nicht generiert werden
323 D Konditionstabelle & konnte nicht generiert werden
324 D Domäne & ist generiert
325 D Datenelement & ist generiert
326 D Tabelle & ist generiert
327 D Konditionstabelle & ist generiert
328 D View & konnte nicht generiert werden
329 D View & ist generiert
330 D Der mandantenunabhängige Import ist noch nicht im Transportpuffer
331 D Domäne & ist bereits vorhanden
332 D Datenelement & ist bereits vorhanden
333 D Tabelle & ist bereits vorhanden
334 D View & ist bereits vorhanden
335 D Start der Nachbearbeitung durch Anwendungsexits &
336 D Erzeugung generierter Dictionary-Objekte
337 D Es können &1 Tabellen generiert werden
338 D Tabelle &1 wird nicht kopiert sondern gelöscht
339 D Fehlende Berechtigung für &1 -> nur Testmodus möglich
340 D Codepage-Konvertierung bei Tabelle &1 aus &2 fehlgeschlagen
341 D & Codepage: &
342 D Keine Berechtigung zur Pflege von Rollen (S_USER_AGR)
343 D Funktionsbaustein &1 hat &2 Tabellen vom Kopieren ausgenommen
344 D Tabelle &1 wird nicht kopiert, da sie zu einem anderen Mandanten gehört
345 D Tabelle &1 wird im Einzelkopiermodus vom Prozess &2 kopiert
346 D &&&
347 D Warnung: Quellmandant hat logisches System, Zielmandant aber nicht
348 D Tabelle &1 wird im Kopiermodus &2 kopiert
349 D Kopie ist abgebrochen -> Restart erforderlich
350 D Quelldestination......................&
351 D Quellsystem.........................&
352 D Mandant im Quellsystem..............&
353 D Benutzer im Quellsystem.............&
354 D Basis Support Package...............&
355 D Bearbeitete Tabellen : &
356 D Zu bearbeitende Tabellen : &
357 D Selektierte Tabellen : &
358 D Remote-Verbindung kann nicht aufgebaut werden: &1&2
359 D Im Quellsystem von der Kopie ausgenommene Tabellen
360 D Fehler bei Objekt &1 &2 &3
361 D Im Quellsystem ausgenommenes Paket: &
362 D Mandant &1 ist bereits Quellmandant einer Mandantenkopie (Hinweis 562628)
363 D Quellmandant &1 ist zur Zeit Ziel einer Mandantenkopie
364 D RFC-Fehler(&3): &1&2
365 D Option IGNORE_CON: Tabelle &1 wird feldweise kopiert wenn möglich
366 D Tabelle &1 wurde dem Hauptprozess zugewiesen
367 D Start der Analyse des Systems &
368 D Stile werden nicht aus Mandant 000 kopiert - verwenden Sie SE72
369 D Formulare werden nicht aus Mandant 000 kopiert - verwenden Sie SE71
370 D Eine Änderung des Quellmandanten ist bei einem Restart nicht zulässig
371 D Für Restart RFC-Destination korrigieren und Transaktion neu starten
372 D Tabellenschlüssel bei &1 Zeilen aus &2 nicht konvertierbar
373 D Konvertierungsfehler bei &1 Zeilen aus &2
374 D Nachbearbeitung erforderlich für &1
375 D Transportprogramm tp erfolgreich gestartet für &1 &2
376 D Transportprogramm tp erfolgreich beendet für &1 &2
377 D Fehler beim Export des Auftrages &1 &2
400 D Mandant & enthält noch & änderbare Aufträge und Aufgaben
437 D Auftrag & kann nur vom Inhaber & importiert werden
442 D Beim Ändern eines Eintrages in Tabelle & trat ein Fehler auf
443 D Beim Löschen eines Eintrages aus der Tabelle & trat ein Fehler auf
444 D Beim Einfügen eines Eintrages in die Tabelle & trat ein Fehler auf
447 D Keine Pflegeberechtigung (Klasse &) für Objekt & & vorhanden
448 D Keine Pflegeberechtigung für mandantenunabhängiges Objekt & &
449 D Sie haben nicht die Berechtigung &1 ID &2 FIELD &3
453 D Keine Pflegetabellen für Objekt & vom Typ & vorhanden
455 D Kritischer Unterschied in Tabelle &: Schlüsselfeld &
456 D Kritischer Unterschied in Tabelle &: Feld &
459 D Standardimport mit Fremdschlüsselprüfungen
460 D Zielmandant des Auftrags & ist &
461 D Beim Update der Objekt-Importflags in Auftrag & trat ein Fehler auf
462 D Beim Update der Schlüssel-Importflags in Auftrag & trat ein Fehler auf
465 D Bitte wählen Sie ein Objekt aus
467 D Unverträgliche Tabelle & in System &
468 D Beim Sichern des Importverzeichnisses für Auftrag & trat ein Fehler auf
469 D Eingegebener Wert nicht möglich
470 D Benutzer- u. Firmenadressen und werden im Zielmandanten gelöscht.
471 D Interner Fehler beim Import des Auftrags: &
472 D Neuimport in anderen Zielmandanten
473 D Fehlende Schlüsseleinträge für Objekt & im Auftrag &
474 D Bitte wählen Sie eine Zeile mit einem gültigen Wert
475 D Bitte geben Sie eine Remoteverbindung zu Quellsystem & an
476 D Keine Berechtigung für Auftrag & im System &
477 D Customizing-Import im gesperrten Anmeldemandanten nicht möglich
479 D Keine Aufträge zur angegebenen Selektion gefunden
482 D Bitte positionieren Sie den Cursor auf einem Auftrag
484 D ASCOT-Tool ist noch nicht freigegeben
485 D Auftrag enthält keine SOBJ-Objekte
500 D & & & &
501 D Keine Einträge zu & in Tabelle & gefunden
502 D Datei & konnte nicht geöffnet werden
503 D Beim Lesen von Datei & trat ein Fehler auf
504 D Bitte gültige Funktion auswählen
505 D Keine abzugleichenden Objekte gefunden, keine Aktion notwendig
506 D Keine Versionen vorhanden
507 D Statuswechsel nicht möglich
508 D Objekt wird bereits bearbeitet
509 D Keine überarbeitete Version vorhanden
510 D Keine aktive Version vorhanden
511 D Zur Übernahme in weitere Systeme Funktion 'Transport vormerken' benutzen
512 D Kennzeichen 'auf SAP-Standard zurückgekehrt' bereits für Objekt gesetzt
513 D Gewählter Transportauftrag nicht möglich, bitte anderen Auftrag wählen
514 D Rückkehr auf SAP-Standard nicht erfolgt
515 D Modus für Programmstart nicht möglich
516 D Momentan keine weitere Bearbeitung möglich
517 D Zurücknahme der Rückkehr auf SAP-Standard nicht erfolgt
518 D Bitte wählen Sie ein Objekt aus
519 D Dokumentation fehlt: &
520 D Interner Fehler SAPSCRIPT bei Dokumentationsanzeige
521 D Es gibt noch offene Reparaturen/Korrekturen
522 D Transport enhält keine Objekte
523 D Objekttyp wird nicht von der Versionsverwaltung unterstützt
524 D Interner Fehler: & & &
525 D Funktion für Objekt & nicht möglich
526 D Report & darf nur beim Upgrade auf & ausgeführt werden.
527 D Modifikationsanalyse (Report RSUMOD01) noch nicht durchgeführt
528 D Objektstatus wird zum Abgleich zurückgesetzt
529 D Prozess &1 auf &2 der abgebrochenen Mandantenkopie vom &3 &4 noch aktiv
531 D &
532 D & &
533 D & & &
534 D & & & &
700 D Die von Ihnen gestartete Mandantenkopie ist abgebrochen
701 D Es wurden mehr als & Tabellen nicht oder nur fehlerhaft kopiert
702 D Ein Exit-Programm ist abgebrochen
703 D Letzter Kopierlauf wurde abgebrochen (evtl. Zeit- oder Datenbankfehler)
704 D Sie besitzen nicht die notwendigen Berechtigungen
705 D Release zwischen den Systemen ist nicht identisch
706 D Die von Ihnen gewählte Parameterkonfiguration ist nicht möglich
707 D Es ist kein Mandantenimport gefunden worden
708 D Es ist kein importierter Mandantenexport gefunden worden
709 D Mandantenkopie wurde durch Benutzeraktion unterbrochen
710 D Ein zweiter Mandantenkopie-Job ist zur Zeit in Arbeit
711 D Bitte überprüfen Sie den Erfolg des Exports
712 D Ausgewählter Kopierlauf wurde abgebrochen (evtl. Zeit oder DB-Fehler)
713 D Mandantenkopie-Sperre in Mandant & wurde gelöst
714 D Letzter, nicht erfolgreicher Lauf liegt & Tage zurück
715 D Gewählter Mandantenkopie-Lauf wurde während der Nachbereitung abgebrochen
716 D Mandantenkopie konnte wegen Repository-Unterschieden nicht starten
000 E Start in background............. .....&
001 E Enter the name of the command file
002 E Enter the table specification
003 E Only A/C/T allowed for All/Command file/Table: &
004 E No client-specific tables or transportable tables found
005 E Command file contains no client-specific tables: &
006 E No table entries in client & for table &
007 E Specify the source client
008 E Source client does not exist: &
009 E Source client is same as logon client
010 E No cancelled run exists for restart
011 E Client 000 is protected and may not be overwritten
012 E Parameter changed after last run
013 E Table & is not client-specific
014 E No restart possible - no tables copied before termination
015 E No authorization for client copy
016 E Client copy locked by other client copy job
017 E You are not authorized to maintain user master data (S_USER_GRP)
018 E You are not authorized to maintain authorization profiles (S_USER_PRO)
019 E Client export from & &
020 E Without number range reset........... &
021 E Selected objects : &
022 E Edited objects : &
023 E Source client : &
024 E Target client : &
025 E Objects to be edited : &
026 E Storage required (KB) : &
027 E Runtime (seconds) : &
028 E Client copy from & &
029 E System ID............................ &
030 E R/3 Release.......................... &
031 E Host................................. &
032 E User................................. &
033 E Parameter
034 E Source client........................ &
035 E Restart.............................. &
036 E Table selection
037 E With application data................ &
038 E With user masters.................... &
039 E Without HR data (Human Resources).... &
040 E Test mode (without database update).. &
041 E Command file......................... &
042 E Table list........................... &
043 E Target client........................ &
044 E Log file............................. &
045 E Log directory........................ &
046 E Determine and copy matchcodes.........&
047 E Client import from & &
048 E Internal error: Mode cannot be used, only C/E/I are allowed
049 E No client copy log entry found for client: &
050 E No errors found in tables for client copy: & &
051 E Internal error: Phase & is unknown
052 E Cannot change table CCCFLOW (&1 in &2)
053 E Invalid TABNAME/FIELDNAME in CCCFINI: & &
054 E Invalid CCFTYPE in CCCFINI: &
055 E CCFTYPE in CCCFINI differs from NAMETAB from: & <<>> &(&)
056 E Table & is inactive in SAP System and thus ignored
057 E WARNING: Cancelled several times
058 E WARNING: Complete run after cancellation
059 E Error: Key for table &1 is not client-dependent: &2
060 E Only insertions.......................&
061 E Copy confirmation
062 E Objects to be edited:
063 E Do you want to continue?
064 E WARNING: Invalid runtime specification
065 E >>> Phase & <<<
066 E Selection list generated
067 E Error in GET_TABLE &
068 E Error in MOD_TABLE &
069 E Error in FIELD_INIT &
070 E DDIC and CCC info loaded
071 E FLOW info updated
072 E Exit program & successfully executed &
073 E Dialog box texts not found
074 E Cannot open log: &
075 E Cannot write log (Server &1 , RC - &2)
076 E Next correction number for log not received: &
077 E &&&&
078 E Error when deleting command file &
079 E Gravity of error........: &
080 E Error number............: &
081 E Name of routine.........: &
082 E Message ID..............: &
083 E Message number..........: &
084 E Command file............: &
085 E Already exists (will be overwritten)
086 E Created on..............: &
087 E By......................: &
088 E Status..................: &
089 E Error occurred writing transport request &
090 E Command file for & is written under: &
091 E For client transport, & entries entered in command file
092 E With cross-client tables..............&
093 E Client export system data:
094 E No fields initialized in table &
095 E No entries in table &
096 E & tables entered in command file
097 E Command file name & already exists
098 E Following tables included in command file:
099 E No command file written for &
100 E No transport number found
101 E ERROR: Invalid PROGTYPE in CCCEXIT: &
102 E ERROR: Type 'F' user exit with SYS_ERROR: &
103 E ERROR: No access to table for user exit: &
104 E WARNING: Open correction for table: & & &
105 E ERROR: Exit program & not found or not executable
106 E ERROR: Report contains syntax errors: &
107 E ERROR: Invalid E071 OBJFUNC entry for table: & &
108 E & executed &(&) entries copied
109 E Error in &2: &1 table keys rejected because of incorrect source client
110 E WARNING: No entries found with component &
111 E WARNING: No entries copied/transported with component &
112 E & executed. & entries found
113 E & executed. & entries copied.
114 E Runtime & seconds
115 E A client copy run is currently active
116 E ERROR: Table is not active: &
117 E ERROR: Table does not exist in database: &
118 E ERROR: Copying customizing data requires re-initialization
119 E ERROR: SQL for inserting in table & produces error: &
120 E ERROR: SQL for deleting table & produces error: &
121 E ERROR: Internal error when inserting in table: &
122 E ERROR: Internal error when deleting table: &
123 E See documentation
124 E ERROR: Internal error when counting table entries (generation)
125 E ERROR: Maximum number of errors exceeded
126 E Table & has no fields, it is ignored
127 E ERROR: Incorrect mode specified, C/E/I permitted only
128 E Mode..................................&
129 E Table & is client-specific
130 E Select a profile with customizing data for the export
131 E User masters require user profiles
132 E During deletion the profile 'DELETE' is automatically generated
133 E Target client is productive and protected against client copy
134 E Report RSCLXCOP cannot be started directly, only batch scheduling
135 E No authorization for generating transport requests for client export
136 E No authorization for cross-system transport
137 E Transport program tp could not be started (RC-&)
138 E Language transport program RSTXR3TR could not be started
139 E Error when determining code page ID
140 E Table & not copied. More than 500,000 entries
141 E Table & (&) is the same and has thus not been copied
142 E ERROR: Read error in client: & table &
143 E ERROR: Write error in client: & & table &
144 E ERROR: Cannot delete in client: & table &
145 E WARNING: Table entries exceed &2 bytes: &1
146 E Program ended with error or warning, return code: &
147 E ERROR: Table & inconsistent in database, see ABAP Dictionary
148 E Table Ins. Del. Upd. Func. kByte Time[sec] Time
149 E
150 E Tables with field initialization
151 E Program ran successfully
152 E End of processing: &
153 E ERROR: Table & is not defined in the ABAP Dictionary
154 E Copied table: & SQL execution: &
155 E Initialize and recreate......... &
156 E Table copied using ABAP Native SQL: &
157 E Remote connection cannot be set up
158 E Error in remote system &1 (&2), see SYSLOG in remote system
159 E You have not specified a remote system
160 E Statistics that were not output cannot be determined in test run
161 E Tables compared: &
162 E Was excluded from copying: &
163 E Table & not edited due to excessive number of errors
164 E Table & not copied due to internal errors
165 E Process & cancelled because of missing authorization
166 E Select a different profile name (name range for customers - Z*)
167 E Enter a profile name
168 E Application data can only be copied with initialize and recreate
169 E Restart option sets the restart profile
170 E Deletion of profiles only possible in display mode
171 E Enter a profile name
172 E Tables deleted : &
173 E Tables for deletion : &
174 E Background job was successfully scheduled, log is displayed in SCC3
175 E The background job could not be scheduled correctly. Error no.: &
176 E Choose a valid source system
177 E Customizing data .....................&
178 E Recopy errors of & &
179 E No variants copied from client 000
180 E Table & already selected
181 E Table & does not exist
182 E Function for SAP use only
183 E Database & already selected
184 E A restart is not possible with a test run, start a complete run
185 E Copier profile:.......................&
186 E DevClass Tables Entries Sec
187 E The profile could not be included in the transport request
188 E Source client user masters............&
189 E Table &: Key: & added to object list
190 E Run cancelled
191 E Program ended abnormally
192 E & & incorrectly specified
193 E No export entry found for command file &
194 E Releases of export and import systems have to be identical
195 E Releases of export and import systems have to be identical
196 E Client comparison of & &
197 E Table Devcl Class Trgt Diff Source Entries Sec
198 E Different tables
199 E Identical tables
200 E File & not found
201 E File cannot be under &
202 E System entry for & not found in TSYST
203 E Empty file under &
204 E No write authorization for &
205 E Table & is not active
206 E No text found for table &
207 E Table & has no fields
208 E File & incomplete
209 E Generic key too large
210 E Profile & does not exist
211 E Copy of Customizing data and user masters required
212 E No table entries found for table &
213 E Database error when reading table &
214 E Profile was not saved, stored as TMP
215 E Double key when inserting in table &
216 E Key to be changed in table & not found
217 E Key to be deleted in table & not found
218 E Database error when writing in table &
219 E Enter an R/3 link
220 E Profile & already exists
221 E Profile & cannot be stored.
222 E SQL error & when editing table &
223 E Endian value not allowed
224 E Invalid number conversion requested
225 E Central user administration is active. User master data is not copied
226 E Client has not yet been generated by a data import
227 E Target client already contains data
228 E Cross-client data is protected
229 E Client is in import mode, start tp-import or processing after import
230 E Log output will be exited, user master data will be deleted
231 E RFC error. System: & Table: & RC: &
232 E No RFC authorization in target system for process &
233 E Read or conversion error system: & table: &
234 E Processing after import not yet completed
235 E System error - termination
236 E View & is not client-specific
237 E Profile value has already been saved
238 E Only numeric clients are allowed
239 E Time stamp: &
240 E Copy made more than a week ago
241 E Logical systems are identical
242 E You do not have authorization S_CLNT_IMP
243 E You are not authorized to create the log
244 E Users with names with '*' cannot create transport requests
245 E Enter a source client
246 E Entry in client table was deleted
247 E Table & is copied with cluster &, not explicitly
248 E RFC login was performed in the incorrect target client
249 E With cross-client Customizing.&
250 E There are & non-critical differences in the table structures
251 E & Tables cannot be converted
252 E Non-critical differences: Convertible tables: &
253 E Non-critical differences: Extended tables in this system: &
254 E Critical differences: Missing tables: &
255 E Differing tables: &
256 E Dev. deliv. entries only data only
257 E Table class class total & diff. &
258 E User master records not compared
259 E The import of cross-client data into production systems is not allowed
260 E Source client & is protected against data export by client copy
261 E Table has new columns in target system: &
262 E Table has convertible differences: &
263 E The client is locked for data import by client copy
264 E Changing the profile during a restart is not permitted
265 E Client copy is now continued in parallel processes
266 E Copy error for the table has been corrected
267 E Copy process & was terminated after user cancellation
268 E You are using a profile that has not been released by SAP
269 E You cannot use the RFC/server group &
270 E Database area analysis status: & &
271 E Area Free(KB) Required(KB)
272 E & &
273 E Only & processes of RFC server group & are used
274 E Process & ended due to problems with lock management
275 E Profile SAP_CUST recommended for copying from client 000
276 E Terminated run cannot be restarted
277 E User SAP* deleted
278 E Inclusive tasks of request......&
279 E & processes of RFC/server group & used
280 E Table & only exists locally
281 E Length change
282 E Table & is convertible to the local system, field missing in RFC
283 E Table & is convertible to the RFC system, field missing locally
284 E Table & is incompatible, the fields are incompatible
285 E Table & is incompatible, fields are missing in both systems
286 E Table & is completely convertible
287 E Table & is only convertible from the local system to the RFC system
288 E Table & is only convertible from the RFC system to the local system
289 E Table & only exists remotely
290 E Data element & is incompatible
291 E Domain & is incompatible
292 E Profile SAP_RECO not allowed: Source client <> target client
293 E Caution: Change documents and local tables are being copied
294 E Change documents are not copied
295 E Test copy - partly without transaction data
296 E & tables in exception list
297 E Error: Table & error in DDIC - Check table with SE14
298 E Copied data in kBytes : &
299 E Deleted data in kBytes : &
300 E Non-critical differences
301 E & non-critical differences found
302 E Do you want to make the copy?
303 E Table extensions
304 E & table extensions found.
305 E Missing tables
306 E & tables missing in the source system.
307 E Table definitions are missing in the target system
308 E Table definition & missing in the target system
309 E Table definition & is missing in the target system, but can be generated
310 E Source system & does not exist.
311 E Process & started on server & (time: &)
312 E Process & has copied data & &
313 E Start: Synchronization and correction of log in file system &
314 E Start: Recopy errors & &
315 E Cancel because of error in address table &
316 E Active Option: &
317 E No password is maintained for RFC destination &
318 E Copy client-specific data from & to & ?
319 E Type of Table & is not Identical
320 E Domain & could not be generated
321 E Data element & could not be generated
322 E Could not generate table &
323 E Condition table & could not be generated
324 E Domain & is generated
325 E Data element & is generated
326 E Table & is generated
327 E Condition table & is generated
328 E View & could not be generated
329 E View & generated
330 E The cross-client import is not yet in the transport buffer
331 E Domain & already exists
332 E Data element & already exists
333 E Table & already exists
334 E View & already exists
335 E Start of post-processing by application exits &
336 E Create generated Dictionary objects
337 E &1 tables can be generated
338 E Table &1 is deleted, not copied
339 E No authorization for &1 -> only test mode possible
340 E Codepage conversion error for table &1 from &2
341 E & Codepage: &
342 E No authorization to maintain roles (S_USER_AGR)
343 E Function module &1 has excluded &2 tables from copy
344 E Table &1 is not copied because it belongs to another client
345 E Table &1 is copied in individual copy mode by process &2
346 E &&&
347 E Warning: Source client has logical system, target client does not
348 E Table &1 is copied in copy mode &2
349 E Copy cancelled -> Restart required
350 E Source destination......................&
351 E Source system.........................&
352 E Client in source system..............&
353 E Users in source system..............&
354 E Basis Support Package...............&
355 E Processed tables : &
356 E Tables to be processed : &
357 E Selected tables : &
358 E Remote connection cannot be made: &1&2
359 E Tables in the source system excluded from the copy
360 E Error in object &1 &2 &3
361 E Package excluded in source system: &
362 E Client &1 is already the source client of a client copy (note 562628)
363 E Source client &1 is currently the target of a client copy
364 E RFC error(&3): &1&2
365 E Option IGNORE_CON: Table &1 is copied field-wise if possible
366 E Table &1 has been assigned to the main process
367 E Start analysis of system &
368 E Styles are not copied from client 000 - Use SE72
369 E Forms are not copied from client 000 - Use SE71
370 E You cannot change the source client at restart
371 E Correct RFC destination and restart transaction
372 E Table key not convertible for &1 rows from &2
373 E Conversion errors in &1 rows from &2
374 E Follow-up actions required for &1
400 E Client & still contains & modifiable requests and tasks
401 E Request & does not exist in system &
402 E Specify Customizing request
403 E Transport object & & & is not a Customizing object
404 E Object & of type & is not a Customizing object
405 E Table/view & is not available active
406 E Inconsistent contents in & for table &
407 E Error during program instantiation for import of &, RC - &
408 E Remote access to table & not possible (record too long)
409 E Log file & could not be opened
410 E Post-import of incorrect objects
411 E Incorrect objects : &
412 E Source system : &
413 E Start date : &
414 E Start time : &
415 E End date : &
416 E End time : &
417 E Imported objects : &
418 E System : &
419 E User : &
420 E Source client : &
421 E Client : &
422 E Host : &
423 E SAP Release : &
424 E Remote connection : &
425 E DB update even with errors
426 E Test mode without DB update
427 E Customizing import cancelled, request not imported
428 E Customizing object &: & deleted, & added, & changed
429 E Foreign key &: & not in check table &
430 E Customizing object &: & incorrect entries not imported
431 E Customizing object type &: & deleted, & inserted or changed
432 E Customizing object &: No statistics due to generic keys
433 E Customizing object & has no key authorization for table &
434 E Customizing object type &: & incorrect objects not imported
435 E Request & is not a Customizing request
436 E Request & already imported (not with ASCOT)
437 E Request & can only be imported by owner &
438 E Request & already imported
439 E Could not set up remote connection &
440 E Client-independent object & not copied
441 E Program generation error for import of & in line &, RC - &
442 E Error when changing entry in table &
443 E Error when deleting entry in table &
444 E Error when inserting entry in table &
445 E Check table & does not exist
446 E Client & does not exist in system &
447 E No maintenance authorization (class &) for object & &
448 E No maintenance authorization for cross-client object & &
449 E You do not have the authorization &1 ID &2 FIELD &3
450 E Error at remote access to table & with destination &
451 E Error reading table &
452 E Starting import of Customizing object & of type &
453 E No maintenance tables exist for object & of type &
454 E Table & locked by another user
455 E Critical difference in table &: Key field &
456 E Critical difference in table &: Field &
457 E Customizing request & not imported
458 E Client-independent object & must not be imported
459 E Standard import with foreign key checks
460 E Target client of request & is &
461 E Error updating object import flags in request &
462 E Error during update of key import flags in request &
463 E Request & was not imported with ASCOT
464 E Customizing object & was imported successfully
465 E Choose an object
466 E & is not a remote connection for system &
467 E Incompatible table & in system &
468 E Error saving import directory for request &
469 E Invalid value entered
470 E User and company addresses deleted in target client
471 E Internal error importing request: &
472 E Reimport in other target clients
473 E Missing key entries for object & in request &
474 E Choose a line with a valid value
475 E Specify remote connection to source system &
476 E No authorization for request & in system &
477 E Customizing import not permitted in locked logon client
478 E Pleae select at least one status
479 E No requests found for specified selection
480 E User & unknown
481 E No ASCOT imports found for selection
482 E Position cursor on a request
483 E Client & does not exist in system &
484 E The ASCOT tool has not been released yet
485 E The request contains no SOBJ objects
486 E Request & does not come from system &
500 E & & & &
501 E No entries found for & in table &.
502 E Could not open file &
503 E Error reading file &
504 E Choose a valid function
505 E There are no objects to be adjusted, no actions necessary
506 E No versions exist
507 E Status cannot be changed
508 E Object is already being edited
509 E No revised version exists
510 E No active version exists
511 E Use 'Mark for transport' function to copy into other systems
512 E Returned to SAP standard flag already set for object
513 E Selected transport request invalid, choose another request
514 E Not returned to SAP standard
515 E Mode not possible for program start
516 E Editing cannot be continued at present
517 E Return to SAP standard not cancelled
518 E Choose an object
519 E Documentation missing: &
520 E Internal SAPSCRIPT error when displaying documentation
521 E There are still open corrections/repairs
522 E The transport does not contain any objects
523 E Object type is not supported by version management
524 E Internal error: & & &
525 E Function not possible for object &
526 E Report & may only be executed when upgrading to &
527 E Modification analysis (report RSUMOD01) not performed yet
528 E Object status reset for adjustment
529 E Process &1 still active in &2 of the cancelled client copies of &3 &4
531 E &
532 E & &
533 E & & &
534 E & & & &
700 E The client copy you started has terminated
701 E More than & tables were not copied or were copied incorrectly
702 E An exit program has terminated.
703 E The last copy run was terminated (poss. timeout or DB error)
704 E You do not have the necessary authorizations
705 E The Releases of the systems are not identical
706 E Parameter configuration chosen invalid
707 E No client import found
708 E No imported client export found
709 E The client copy was terminated by a user action
710 E A second client copy job is currently in progress
711 E Check success of export
712 E The copy run chosen was cancelled (poss. timeout or DB error)
713 E Client copy lock in client & was deleted
714 E The last run that was not successful is & days back
715 E The client copy was cancelled during post-processing
716 E Client Copy could not start because of Repository differences