Menu

SAP Message Class UPS

ALE - Verteilungspaket

Recommended Now

Fire TV Stick Lite Essentials Bundle

This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.

Check it out on amazon.com →

The Message Class UPS (ALE - Verteilungspaket) is a standard Message Class in SAP ERP and is part of the package U_P_S.

Technical Information

Message Class UPS
Short Text ALE - Verteilungspaket
Package U_P_S

Messages

ID Language Text
000 D ****** Allgemeines ******************************************************
001 D Verbuchung nur möglich durch Verteilungseinheit &1
002 D &1
003 D Von &1 nach &2 kann &3 laut Verteilungsmodell nicht verteilt werden
004 D Nachricht zu Verteilungspaket &1 wurde erfolgreich eingebucht
005 D Es kann nur jeweils ein Verteilungspaket verbucht werden
006 D Syntax-Fehler in Nachricht: Keine Kopfinformationen zum Paket vorhanden
007 D Keine Nachricht übergeben
008 D Fehler bei der Eingangsverarbeitung des Verteilungspakets
009 D Objekt-Nachricht ist in Verteilungseinheit &1 obsolet
010 D Quittung zu Verteilungseinheit &1 wurde eingebucht
011 D Verteilungspaket &1 ist nicht vorhanden
012 D Es kann nur jeweils eine Quittung verarbeitet werden
013 D &1 Nachrichten aufgebaut
014 D Fehler bei der Statusänderung des Verteilungspakets
015 D Fehler beim Schreiben des Anwendungs-Logs
016 D Job &1 mit der ID &2 angelegt
030 D ****** Application-Log (DSPACKAGE - OUTBOUND) ***************************
031 D Instanz &1 für Paket &2
032 D Bearbeite Instanz &1 : &2
034 D Prüfung der Objektliste (&1 Objekte) :
035 D &1, '&2 &3' (&4)
036 D ....Keine Nachricht wurde erzeugt
037 D ....Für den Korrektureintrag wird eine Funktion benötigt (I, U, D)
038 D ....Nachricht &1 wurde erzeugt
044 D Aufbau der Nachrichten (&1 Objekte) :
046 D ....Objekte des Objekttyps &1 werden nicht von Paketen verteilt
047 D ....Fehler in der Ausgangsverarbeitung des Objekttyps &1
048 D ....Es konnte keine Instanz des Objektyps &1 erzeugt werden
060 D ...Fehler im asynchronen RFC: Abbruch der Ausgangsverarbeitung.
080 D ****** Application-Log (DSPACKAGE - INBOUND) ****************************
081 D Verarbeite Verteilungseinheit aus folgenden Paketen :
082 D ..Korrekturpaket &1
083 D ..Originalpaket &1
089 D .. &1, '&2 (&3)' : Wurde mit Warnung verbucht (Status &4)
090 D Objekte der Hierarchieebene &1 :
091 D ..Fehlerhafte Objekte vorhanden.
092 D .. &1, '&2 (&3)' : Keine Nachricht gefunden
093 D .. &1, '&2 (&3)' : Ist bereits verarbeitet (Status 53)
094 D .. &1, '&2 (&3)' : Wurde erfolgreich vearbeitet (Status &4)
095 D .. &1, '&2 (&3)' : Fehler in der Verarbeitung (Status &4)
096 D .. &1, '&2 (&3)' : Wurde auf 'obsolet' gesetzt (Status &4)
097 D Vorgänger-Einheit &1 ist noch nicht eingebucht
098 D Nachverbuchen der Objekte des Typs &1:
099 D Es wird nur die manuelle Selektion verbucht
100 D Verteilungspaket &1 erhält folgenden Status: &2
101 D .. &1, '&2 (&3)' : Bereits Fehler in Objektinstanz
150 D ****** API- / DB-Schnittstelle ******************************************
151 D Paket ist freigegeben, Nur Verteilungs-/Statusinformationen änderbar
152 D Kopfdaten des Verteilungspakets sind unvollständig
153 D Nicht alle Objekte einem Objekttyp zugeordnet
154 D Doppelte Einträge werden aus der Objektliste entfernt
155 D Kein vollständiger Bezug der Korrektur zum Originalpaket vorhanden
156 D Originalpaket &1 ist nicht vorhanden
157 D Originalpaket &1 kann noch ohne Korrektur geändert werden
158 D Keine Änderungen des verbuchten Verteilungspakets &1 möglich
159 D Ungleiche Verteilungsrichtung von Korrektur- (&1) und Originalpaket (&2)
160 D Zum Originalpaket &1 existiert noch die offene Korrektur &2
161 D Für Objekte in Korrekturen ist eine Änderungsfunktion vorgeschrieben
162 D Es wird die Verteilungspaketnummer &1 verwendet
163 D Objekttyp &1 ist nicht vorhanden
164 D Verteilungsrichtung &1 unbekannt (Ausgang = 1, Eingang = 2)
165 D Korrekturpaket ist bereits Original &1 zugeordnet
166 D Paketart &1 unbekannt ('O' : Originalpaket, 'C' : Korrekturpaket)
167 D Objekttyp &1 ist in Einheiten des Typs &2 nicht verteilbar
168 D Verteilungsmodell erlaubt keine Verteilung von Paketen nach &1
169 D Keine Änderungen des abgelehnten Verteilungspakets &1 möglich
170 D Verteilungspaket-Typ &1 ist nicht vorhanden
171 D >>>> Verarbeitung in Funktionsbaustein &1
172 D <<<< Verarbeitung in Funktionsbaustein &1
173 D Es konnte keine Verteilungspaket-Nummer vergeben werden
174 D Änderungen am Verteilungspaket &1 werden verbucht
175 D Eigentümer '&1' ist nicht erlaubt ('L': lokales Sytem , 'R': Partner)
176 D Verteilungspaket &1 existiert bereits
177 D Lokale Korrekturen im Eingang dürfen nur Objekte löschen
178 D Vorgängerpaket &1 der Korrektur existiert nicht
179 D Paketname &1 wird in der Einheit bereits verwendet
180 D Nach &1 existieren noch weitere Korrekturen zum Originalpaket &2
181 D Eingehende Verteilungspakete müssen ihre Nachrichten-Nummer enthalten
182 D Status &1 ist für die Richtung &2 des Verteilungspakets nicht vorgesehen
183 D Pakettyp &1 der Verteileinheit erlaubt keine Korrekturen
184 D Pakettyp &1 der Verteileinheit erlaubt keine Korrekturen im Zielsystem
185 D Quittung an das Quellsystem &1 gesandt
186 D Quittung konnte nicht an das Quellsystem &1 gesandt werden
187 D Der zugeordnete Middlewaretyp &2 erlaubt keine Verteilung nach &3
188 D Ungültige Änderungsfunktion &1 des Objektes {'I', 'U', 'D'}
189 D Zur Objektinstanz des Verteilungspakets existieren noch keine Daten
190 D Schlüsselfelder &1 werden von der Instanz übernommen
191 D Paketart &1 wird von der Instanz übernommen
192 D Paket &1 ist bereits freigegeben, Löschung ist nicht mehr möglich
193 D Vorgängerpaket &1 wurde noch nicht verteilt
194 D Paketschlüssel entspricht nicht dem der aktuellen Instanz
195 D Es können nur Pakete mit Richtung '1' (Ausgang) verteilt werden
196 D Paket wurde bereits verteilt
197 D System verteilt nur freigegebene Pakete
198 D Status &1 wird intern vergeben und kann nicht extern gesetzt werden
199 D Es existiert kein änderbares Paket in der Verteilungseinheit
201 D Intervall für Nummernkreisobjekt &1 konnte nicht angelegt werden
202 D Nur eingehende Pakete verarbeitbar
203 D Nicht alle Pakete freigegeben und genehmigt
204 D Paket ist gesperrt, Nur Verteilungs-/ Statusinformationen änderbar
205 D Verteilungseinheit muß zuerst genehmigt werden
206 D Verteilungspaket wurde nur zur Anzeige instanziiert
207 D Verteilungseinheit wurde nur zur Anzeige instanziiert
208 D Verteilungseinheit existiert bereits
209 D Verteilungseinheit ist nicht vorhanden
210 D Objektschlüssel angeben
211 D Objekttyp angeben
212 D Paket &1 ist nicht in der Einheit enthalten
213 D Pakettyp &1 des Originalpakets erlaubt keine Korrekturen im Quellsystem
214 D Paketname &1 ist für die externe Nummernvergabe nicht zugelassen
215 D Service wird vom Objekttyp &1 nicht angeboten
216 D Objekt ist bereits in der Einheit enthalten und wird aktualisiert
217 D Bisherige Eintrag zu diesem Objekt wird gelöscht
218 D Einheit ist eingebucht oder abgelehnet, Nur noch Anzeige möglich
219 D Service wird von der Middleware &1 nicht angeboten
221 D Kein Objekt selektiert
222 D Nur Objekte freigegebener Pakete berücksichtigt
223 D Original ist nicht freigegeben
224 D Instanz &1 kann nicht wiederhergestellt werden
225 D Keine Berechtigung zum Anlegen des Verteilungspakets
226 D Keine Berechtigung zum Ändern des Verteilungspakets
227 D Keine Berechtigung zum Anzeigen des Verteilungspakets
228 D Keine Berechtigung zum Löschen des Verteilungspakets
229 D Funktionsaufruf wurde mit Fehler beendet.
230 D Verteilungspaket existiert bereits
231 D Verteilungspaket ist nicht vorhanden
232 D Instanz &1 für Einheit
233 D Job &1, ID &2 ist zu dieser Einheit bereits eingeplant
234 D Datum für die Jobeinplanung muß in der Zukunft liegen
235 D Objekt &1, '&2 (&3)' ist nicht verteilbar
236 D Parameter für den Batch-Job sind unvollständig
237 D Verbuchung wird nach Serialisierungsebene &1 regulär abgebrochen
238 D Objektschlüssel &1, '&2 (&3)' ist unvollständig
239 D Vervollständigt wurde : &1, '&2 (&3)'
240 D Quellobjekte können nur im Originalpaket angegeben werden
241 D Objekttyp &1 ist für Quellobjekte nicht vorgesehen
242 D Objekt &1, '&2 (&3)' kann nicht als Quellobjekt verwendet werden
243 D Das Objekt ist bereits in der Liste vorhanden
244 D Geben Sie eine Objektgültigkeit an
245 D Abgleich mit der Replikations-Tabelle schlug fehl
246 D Replikations-Tabelle wurde erfolgreich aktualisiert
247 D Fehler beim aktualisieren der Replikations-Tabelle
248 D Replikations-Tabelle filterte keine Objekte aus
249 D Folgende Objekte wurden durch die Replikations-Tabelle ausgefiltert:
250 D &1, '&2 (&3)'
251 D Vorgänger-Einheiten können nur im Originalpaket angegeben werden
252 D Der Name der Vorgängereinheit muß angegeben werden
253 D Vorgänger-Verteilungseinheit &1 existiert nicht
254 D Doppelte Einträge wurden aus der Vorgänger-Liste entfernt
255 D Verteilungseinheit darf sich selbst nicht als Vorgänger haben
256 D .. Weitere Verbuchung der fehlerhaften Instanz(en) wird abgebrochen
257 D Serialisierung wurde aktalisiert, Paket kann nun freigegeben werden
258 D Freigabe des Pakets wurde abgebrochen
259 D Identifizierung der Objekt-Nachrichten ist erfolgt
260 D Genehmigung der Einheit wurde abgebrochen
261 D Angegebene Gültigkeit wurde korrigiert
262 D 'Strenge Serialisierung' und 'Nachverbuchbarkeit' schließen sich aus
263 D Fehler in der Job-Verwaltung
264 D Korrektur kann nur in Einheiten des Typs &1 eingefügt werden
265 D Serialisierungsebenen wurden neu berechnet
266 D &1 Nachrichten wurden noch nicht ans Zielsystem übergeben
267 D &1 Nachrichten wurden noch nicht identifiziert
268 D Objekt &1, '&2 &3' ist nicht gültig
269 D Objekt kann nicht angezeigt werden
270 D Objekt kann nur mit Änderungsnummer gelöscht (deaktiviert) werden
271 D Es wurden alle Nachrichten an das Zielsystem übergeben
272 D Es wurden alle Nachrichten identifiziert
273 D Die Segmentdefinition &1 ist nicht vorhanden
274 D Das UPS wurde erfolgreich eingerichtet
275 D Keine Berechtigung zum Anlegen des UPS-Customizings
276 D Keine Berechtigung zum Ändern des UPS-Customizings
277 D Keine Berechtigung zum Anzeigen des UPS-Customizings
278 D Keine Berechtigung zum Löschen des UPS-Customizings
300 D ****** DYNPO-Verarbeitung ***********************************************
301 D Kein Protokoll : Fehlerinformation im Text des Nachrichten-Status
302 D Nur Originalpakete erlaubt, Original zum Korrekturpaket wird selektiert
303 D Verteilungseinheit &1 wurde gelöscht
304 D Korrekturpaket &1 wurde gelöscht
330 D ******** Serialisierungsengine ******************************************
331 D FUB &: Serialisierungsgraph ist zyklisch (rekursiv)
332 D FUB &: Serialisierungsgraph ist inkonsistent
490 D ******** PROCESS FLOW ***************************************************
491 D Automatische Freigabe wird durchgeführt...
492 D Automatisches Senden wird durchgeführt...
493 D Automatische Genehmigung wird durchgeführt...
494 D Automatische Einbuchung wird durchgeführt...
500 D ******** CUSTOMIZING ****************************************************
501 D Objekttyp muß einer Verwendung zugeordnet sein
502 D Geben Sie eine Beschreibung ein
503 D Zur Sprache &1 ist bereits eine Beschreibung gepflegt
504 D Objekttyp &1 wird noch in Pakettypen verwendet
505 D DDIC-Struktur &1 ist nicht vorhanden
506 D Nachrichtentyp &1 ist nicht vorhanden
507 D IDoc-Typ &1 ist nicht vorhanden
508 D Objekttyp &1 wurde gesichert
509 D Geben Sie einen Objektyp ein
510 D Objekttyp &1 existiert bereits
511 D Zugehörige Service wird entfernt
512 D Geben Sie einen Nachrichtentyp ein
513 D Geben Sie einen IDoc-Typ ein
514 D Objekttyp &1 wurde gelöscht
515 D Zuerst Dynpro &1 berarbeiten
516 D Keine Berechtigung zum Ändern
517 D Keine Berechtigung zum Anzeigen
520 D Geben Sie einen Pakettyp ein
521 D Pakettyp &1 existiert bereits
522 D Pakettyp &1 wurde gesichert
523 D Pakettyp &1 wurde gelöscht
524 D Pakettyp &1 wird bereits in Verteilungseinheiten verwendet
525 D Objekttyp &2 wird bereits in Paketen des Typs &1 verwendet
526 D Objekttyp &1 wird bereits in Verteilungspaketen verwendet
527 D Die Verbuchung wird abgebrochen
528 D Änderungen an diesen Einstellungen sind nicht erlaubt
529 D Pakettyp &1 wird Middleware-Typ &2 zugewiesen
532 D Die zentralen Einstellungen wurden gesichert
600 D Es entsprachen keine Einheiten den Selektionskriterien!
895 D
896 D
897 D
898 D
899 D &1 &2 &3 &4
000 E ****** General ******************************************************
001 E Posting only possible with ALE distribution unit &1
002 E &1
003 E From &1 to &2, &3 cannot be distributed according to the distrib. model
004 E ALE distribution packet &1 has been successfully posted
005 E Only one distribution packet can be posted at a time
006 E Syntax error in message: No header information available for the packet
007 E No message has been transferred
008 E Error while processing the inbound distribution packet
009 E Object message is obsolete in ALE distribution unit &1
010 E Receipt for ALE distribution unit &1 was posted
011 E ALE distribution packet &1 does not exist
012 E Only one receipt at a time can be processed
013 E &1 messages created
014 E Error while changing the status of the ALE distribution packet
015 E Error writing application log
016 E Job &1 created with ID &2
030 E ****** Application Log (DSPACKAGE - OUTBOUND) ***************************
031 E Instance &1 for packet &2
032 E Processed instance &1: &2
034 E Object list check (&1 objects) :
035 E &1, '&2 &3' (&4)
036 E ....No message has been created
037 E ... A function (I, U, D) is required for the correction entry
038 E ....Message &1 has been created
044 E Generation of messages (&1 objects):
046 E ....Objects of object type &1 are not distributed by packets
047 E ....Error in the outbound processing of object type &1
048 E ....An instance of object type &1 could not be created
060 E Error in asynchronous RFC, output processing canceled
080 E ****** Application Log (DSPACKAGE - INBOUND) ****************************
081 E Processed ALE distribution unit from following packets:
082 E ..Correction packet &1
083 E ..Original packet &1
089 E .. &1, '&2 (&3)': Posted with warning (status &4)
090 E Objects in hierarchy level &1 :
091 E ..Objects containing errors exist.
092 E .. &1, '&2 (&3)': No message found
093 E .. &1, '&2 (&3)' : Already processed (status 53)
094 E .. &1, '&2 (&3)' : Successfully processed (status &4)
095 E .. &1, '&2 (&3)' : Error during processing (status &4)
096 E .. &1, '&2 (&3)' : Set to 'obsolete' (status &4)
097 E Preceding unit &1 is not yet posted
098 E Reposting of object of type &1:
099 E Only the manual selection is posted
100 E ALE distribution packet &1 contains the following status: &2
101 E .. &1, '&2 (&3)' : Already errors in object instance
150 E ****** API / DB Interface ******************************************
151 E Packet is released, only distribution/status information can be changed
152 E Header data of the distribution packet is incomplete
153 E Not all objects assigned to an object type
154 E Duplicated entries are removed from the object list
155 E No complete reference to the correction for the original packet available
156 E Original packet &1 does not exist
157 E Original packet &1 can still be changed without correction
158 E The updated ALE distribution packet &1 cannot be changed
159 E Distribution direction of correction (&1) and original packet (&2) differ
160 E The open correction &2 is still available for original packet &1
161 E A change function is stipulated for objects in corrections
162 E ALE distribution packet number &1 is being used
163 E Object type &1 does not exist
164 E Distribution direction &1 not known (outbound - 1, inbound - 2)
165 E Correction packet is already assigned to original packet &1
166 E Packet type &1 not known ('O': Original packet, 'C': Correction packet)
167 E Object type &1 cannot be distributed into units of type &2
168 E Distribution model does not allow any distribution of packets to &1
169 E No changes can be made to the rejected ALE distribution packet &1
170 E Distribution packet type &1 does not exist
171 E >>>> Processing in Function Module &1
172 E <<<< Processing in Function Module &1
173 E An ALE distribution packet number could not be assigned
174 E Changes to ALE distribution packet &1 posted
175 E Owner '&1' is not allowed ('L': Local system, 'R': Partner)
176 E ALE distribution packet &1 already exists
177 E Local corrections in inbound processing can only delete objects
178 E Predecessor packet &1 of correction does not exist
179 E Packet name &1 is already used in the unit
180 E After &1 there are still more corrections for original packet &2
181 E Inbound ALE distribution packets must include message numbers
182 E Status &1 is not intended for direction &2 of the distribution packet
183 E Packet type &1 of distribution unit does not allow corrections
184 E Packet type &1 of dist. unit does not allow corrections in target system
185 E Receipt sent to source system &1
186 E Receipt could not be sent to source system &1
187 E The assigned middleware type &2 does not allow distribution to &3
188 E Invalid change function &1 of object {'I', 'U', 'D'}
189 E No data exists for the object instance of the ALE distribution packet
190 E Key fields &1 are accepted by the instance
191 E Packet type &1 adopted by the instance
192 E Packet &1 has already been released and can no longer be deleted
193 E Preceding packet &1 has not been distributed
194 E Packet key does not correspond to the current instance
195 E Only packets with direction '1' (outbound) can be distributed
196 E Packet has already been distributed
197 E System only distributes released packets
198 E Status &1 is assigned internally and cannot be set externally
199 E No packet in the distribution unit can be changed
201 E Interval for number range object &1 could not be created
202 E Only inbound packets can be processed
203 E Not all packets released and approved
204 E Packet is locked, only distribution/status information can be changed
205 E Distribution unit must first be approved
206 E Distribution packet has been instantiated for display only
207 E Distribution unit has been instantiated for display only
208 E Distribution Packet Already Exists
209 E Distribution unit does not exist
210 E Specify object key
211 E Specify object type
212 E The unit does not contain packet &1
213 E Packet type &1 of original packet allows no corrections in source system
214 E Packet name &1 is not allowed for external number assignment
215 E Service is not offered by object type &1
216 E Object is already in the unit and is updated
217 E Previous entry for this object is deleted
218 E Unit is posted or rejected, you can only display the unit
219 E The service is not provided by the middleware &1
221 E No object selected
222 E Only objects of released packets taken into account
223 E Original is not released
224 E Instance &1 cannot be recreated
225 E Not authorized to create an ALE distribution packet
226 E Not authorized to change an ALE distribution packet
227 E Not authorized to display an ALE distribution packet
228 E Not authorized to delete an ALE deletion packet
229 E Function call terminated with errors
230 E Distribution packet exists already
231 E Distribution packet does not exist
232 E Instance &1 for unit
233 E Job &1, ID &2 is already scheduled for this unit
234 E Date for job scheduling must be in the future
235 E Object &1, '&2 (&3)' cannot be distributed
236 E Parameters for the batch job are incomplete
237 E Posting is stopped after serialization level &1
238 E Object key &1, '&2 (&3)' is incomplete
239 E &1, '&2 (&3)' were completed
240 E Source objects can only be entered in the original packet
241 E Object type &1 is not planned for source objects
242 E Object &1, '&2 (&3)' cannot be used as a source object
243 E Object already in the list
244 E Enter an object validity
245 E Comparision with replication table failed
246 E Replication table has been successfully updated
247 E Error occurred while updating the replication table
248 E No objects are filtered out by the replication table
249 E Following objects have been filtered out by the replication table:
250 E &1, '&2 (&3)'
251 E Preceding units can only be entered in the original packet
252 E The name of the preceding unit must be entered
253 E Preceding distribution unit &1 does not exist
254 E Duplicated entries were removed from the list of predecessors
255 E Distribution unit cannot have itself as a predecessor
256 E .. Further posting of the instance(s) containing errors cancelled
257 E Serialization was updated, packet can now be released
258 E Release of packet was cancelled
259 E Object messages have been identified
260 E Approval of unit has been cancelled
261 E Specified validity was corrected
262 E Strict Serialization and 'Repostability' are mutually exclusive
263 E Error in job administration
264 E Correction can only be inserted in units of type &1
265 E Serialization levels have been recalculated
266 E &1 messages have not yet been transferred to the target system
267 E &1 messages have not yet been identified
268 E Object &1, '&2 &3' is not valid
269 E Object cannot be diplayed
270 E Object can only be deleted (deactivated) with change number
271 E All messages have been transferred to the target system
272 E All messages have been identified
273 E Segement definition &1 does not exist
274 E UPS has been set up successfully
275 E No authorization to create UPS Customizing
276 E No authorization to change UPS Customizing
277 E No authorization to display UPS Customizing
278 E No authorization to delete UPS Customizing
300 E ****** Screen Processing *******************************************
301 E No log: Error information in text of the message status
302 E Only original packets allowed, original of correction packet selected
303 E Distribution unit &1 was deleted
304 E Correction packet &1 was deleted
330 E ******** Serialization Engine ******************************************
331 E Function Module &: Serialization Graph is Cyclical (Recursive)
332 E Function Module &: Serialization Graph is Inconsistent
490 E ******** PROCESS FLOW ***************************************************
491 E Automatic release is being executed ...
492 E Automatic sending is being executed ...
493 E Automatic approval is executed ...
494 E Automatic posting is being executed ...
500 E ******** CUSTOMIZING ****************************************************
501 E Object type must be assigned to a usage
502 E Enter a description
503 E A description has already been entered for language &1
504 E Object type &1 is still used in packet types
505 E DDIC structure &1 does not exist
506 E Message type &1 does not exist
507 E IDoc type &1 does not exist
508 E Object type &1 was saved
509 E Enter an object type
510 E Object type &1 already exists
511 E Related service removed
512 E Enter a message type
513 E Enter an IDoc type
514 E Object type &1 was deleted
515 E First edit screen &1
516 E You are not authorized to make changes
517 E No display authorization
520 E Enter a packet type
521 E Packet type &1 already exists
522 E Packet type &1 saved
523 E Packet type &1 deleted
524 E Packet type &1 is already used in distribution units
525 E Object type &2 is already used in packets of type &1
526 E Object type &1 is already used in distribution packets
527 E Posting is terminated
528 E Changes to these settings are not allowed
529 E Packet type &1 is assigned middleware type &2
532 E Central settings have been saved
600 E No units corresponded to the selection criteria
891 E
892 E
893 E
894 E
895 E
896 E
897 E
898 E
899 E &1 &2 &3 &4