This bundle contains Amazon Fire TV Stick Lite and Mission USB Power Cable. The USB power cable eliminates the need to find an AC outlet near your TV by powering Amazon Fire TV directly from your TV's USB port. Includes special power management circuitry that enhances the peak power capability of the USB port by storing excess energy and then releasing it as needed.
Check it out on amazon.com →The Message Class UD (UDM-Unternehmensdatenmodell) is a standard Message Class in SAP ERP and is part of the package SDUM.
Message Class | UD |
Short Text | UDM-Unternehmensdatenmodell |
Package | SDUM |
ID | Language | Text |
---|---|---|
000 | D | ***** Allgemeingültige Nachrichten UDM ********************************** |
001 | D | Benutzer & existiert nicht im System (Bitte Schreibweise überprüfen) |
002 | D | Benutzer & ist nur für Sprache & zugelassen |
003 | D | Benutzer & ist für die Pflegetransaktion nicht zugelassen |
004 | D | Bitte nur im Anzeigemodus arbeiten |
005 | D | Benutzer & ist für Ebene & nicht zugelassen |
006 | D | Standardeinstellung ist nicht möglich |
007 | D | Nutzer & ist für Sprache & nicht zugelassen |
008 | D | UDM-Berechtigung des Benutzers & wurde gelöscht |
009 | D | UDM-Berechtigung des Benutzers & wurde nach & kopiert |
010 | D | UDM-Berechtigung des Benutzers & ist bereits vorhanden |
011 | D | UDM-Berechtigung des Benutzers & ist nicht vorhanden |
012 | D | Bitte die Namen beider Benutzer eingeben |
013 | D | Bitte den Namen des Benutzers eingeben |
014 | D | UDM-Berechtigung des Benutzers & wurde gesichert |
015 | D | Benutzer & ist für die Transaktion SIMM nicht zugelassen |
016 | D | Bitte nur eine Funktion bzw. ein Objekt auswählen |
017 | D | Es gibt keine Objekte gemäß angegebener Selektion |
018 | D | Kurzbeschreibungen werden in der Definition eingeblendet |
019 | D | Kurzbeschreibungen werden in der Definition ausgeblendet |
020 | D | Bitte vor dem Sichern Kurzbeschreibungen ausblenden |
021 | D | Bitte vollständigen Schlüssel angeben bzw. F4-Hilfe benutzen |
022 | D | Bitte Feld ausfüllen |
023 | D | Anzeigemodus ist aktiv |
024 | D | Pflegemodus ist aktiv |
025 | D | Bitte bei & nur & Zeichen angeben |
026 | D | & beginnt nicht mit einem Buchstaben (Bitte überprüfen) |
027 | D | & enthält Leerzeichen (Bitte ohne Leerzeichen eingeben) |
028 | D | & enthält ein nichtalphanumerisches Zeichen |
029 | D | & ist ein SAA-reserviertes Wort (Bitte ein anderes Wort wählen) |
030 | D | & darf nur mit 3 Buchstaben beginnen |
031 | D | & darf in den letzten 7 Zeichen nur Ziffern enthalten |
032 | D | Definition & wurde gesichert |
033 | D | Interner Fehler (Objekt-Id & ist nicht unterstützt) |
034 | D | Bitte korrekten Befehl eingeben |
035 | D | Protokoll & ist nicht vorhanden |
036 | D | Bitte Cursor auf eine gültige Zeile positionieren |
037 | D | Bitte den Cursor auf eine gültige Position stellen |
038 | D | & liegt im Kundennamensraum |
039 | D | Es wurde nichts ausgewählt |
040 | D | Interne Fehler |
041 | D | Interner Fehler (Objekttyp & ist nicht definiert) |
042 | D | Interner Fehler (Funktion & ist noch nicht realisiert) |
043 | D | Interner Fehler (Objekt-Ident & ist nicht unterstützt) |
044 | D | &1&2&3&4 |
045 | D | Internal error (&1 / &2 / &3) |
046 | D | Interner Fehler: Löschen Objekt &1 &2 |
047 | D | Feld ist leer (Bitte ausfüllen) |
048 | D | Benutzereinstellungen wurden gesichert |
049 | D | Bitte genau 4 alphanumerische Zeichen verwenden |
050 | D | Übergang zum Anzeigemodus (Bitte vorher Kurzbeschreibungen ausblenden) |
051 | D | Anlegen ist nur im Pflegemodus möglich |
052 | D | Löschen ist nur im Pflegemodus möglich |
053 | D | Name stimmt in den ersten 8 Stellen mit exist. Entitätstyp überein |
054 | D | & enthält einen Bindestrich (Bitte ohne Bindestrich eingeben) |
055 | D | Attributsname muß ungleich BLANK sein |
056 | D | Der Text enthält &1 unbekannte(n) Entitätstyp(en) |
057 | D | Das Datenmodell & konnte nicht gesperrt werden |
058 | D | Die Umsetzung wurde erfolgreich beendet |
059 | D | Bitte einen zulässigen Wert für den Typ eingeben |
060 | D | Aktion wurde abgebrochen |
061 | D | Es wurde eine Aufgabe mit der Nummer & angelegt |
062 | D | Der Auftrag/die Aufgabe wurde gesperrt |
063 | D | Das Schreiben eines Korrektureintrages für & wurde abgebrochen |
064 | D | Auf Wurzel ist nur Einfügen untergeordnet möglich |
065 | D | Fehlende Berechtigung zum Anlegen oder Ändern einer View |
066 | D | Datenmodell &1 nicht gefunden (Vermutlich sind Daten nicht konsistent) |
067 | D | Entitätstyp &1 nicht gefunden (Vermutlich sind Daten nicht konsistent) |
068 | D | Definition des SAP-Objektes ist nicht änderbar (Bitte Ergänzung anlegen) |
069 | D | Es ist eine Datenumsetzung erforderlich. Siehe Hilfe. |
070 | D | Fehler beim Öffnen des SAP-script-Formulars |
071 | D | Name & enthält einen ungültigen Präfix. Bitte Schreibweise prüfen |
072 | D | Es sind nur die Werte 'X' und 'Blank' zugelassen |
073 | D | Bitte ein Modellierungsobjekt angeben |
074 | D | Es sind nur Werte ungleich 'Blank' zugelassen |
075 | D | Sie besitzen keine Berechtigung für Transaktion & |
099 | D | Interner Fehler im Data Modeler |
100 | D | ***** Nachrichten objektbezogen allgemeine Mudule |
101 | D | Objekt & wurde zurückgesetzt |
102 | D | Objekt & wurde gesichert |
103 | D | Objekt & wurde aktiviert |
104 | D | Objekt & & wurde gelöscht |
105 | D | Objekt & ist neu |
106 | D | Objekt & ist nur in aktiver Version vorhanden |
107 | D | Objekt ist nicht vorhanden |
108 | D | Kein passendes Objekt gefunden |
109 | D | Objekt existiert bereits |
110 | D | Objekt & aktiv nicht vorhanden |
111 | D | Objekt & ist bereits logisch gelöscht |
112 | D | Objekt & wurde logisch gelöscht |
113 | D | & wurde(n) nicht gelöscht |
114 | D | Objekt & kann nicht gelöscht werden (Bitte im Protokoll nachsehen) |
115 | D | Objekt & ist nicht vorhanden (Bitte anlegen) |
116 | D | Objekt & ist nicht vorhanden (Bitte im Änderungsmodus anlegen) |
117 | D | Bitte zuerst das Datenmodell & anlegen |
118 | D | Maximale Anzahl & ist erreicht |
119 | D | Bitte ein gültiges Objekt auswählen |
120 | D | Objekt & (& ist nicht vorhanden) |
121 | D | Objekt & wurde nicht gesichert |
122 | D | Temporäre Version vom Objekt & gezogen |
123 | D | Identische Version war bereits gezogen |
124 | D | &1 wurde(n) gesichert |
125 | D | &1 wurde(n) gelöscht |
126 | D | Objekt &1 wird verwendet |
127 | D | Bitte erst sichern (Wegsprung bei neuem Objekt ist nicht möglich) |
128 | D | Bitte erst die Referenzen auflösen |
160 | D | Bearbeitung der Tabelle & & hat begonnen |
161 | D | Bearbeitung der Tabelle & wurde erfolgreich beendet |
162 | D | Bearbeitung der Tabelle & wurde mit Fehlern beendet |
163 | D | Konvertierung Entitätstyp & von & in & nicht eindeutig |
164 | D | Fehler beim Sichern des Entitätstypattributes & & |
165 | D | Fehler beim Sichern des Dokubausteins & |
166 | D | Von & Sätzen wurden & erfolgreich bearbeitet |
180 | D | ***** Nachrichten Versionsverwaltung bis 199 |
181 | D | Version & von & nicht gefunden |
182 | D | Inkonsistenz zwischen Delta und Vollversion |
183 | D | Temporäre Version vom Objekt & gezogen |
184 | D | Identische Version war bereits gezogen |
185 | D | Fehler beim Zurückholen der Version |
186 | D | Zurückholen ist nur für alte Versionen möglich |
187 | D | Fehler beim Ziehen der Version |
188 | D | Die Versionsverwaltung wurde abgebrochen |
189 | D | Version & zu & wurde zurückgeholt |
200 | D | **** Nachrichten Datenmodellpflege ********************************** |
201 | D | Das Datenmodell & ist nicht vorhanden |
202 | D | Datenmodell & ist nicht vorhanden |
203 | D | Datenmodell & wurde gelöscht |
204 | D | Datenmodell & wurde gesichert |
205 | D | Datenmodell & wurde nicht gelöscht |
206 | D | Datenmodell & wurde bereits logisch gelöscht |
207 | D | Datenmodell & existiert bereits |
208 | D | Bitte nur eine Art auswählen |
209 | D | Der angegeben Farbtyp ist nicht zugelassen. |
250 | D | **** Nachrichten für Druckbausteine reserviert ************************** |
251 | D | Bitte eine Beziehungsrichtung auswählen |
252 | D | Die Option zum Druck der Attribute wird implizit gesetzt. |
253 | D | Bitte Generalisierung oder/und Spezialisierung auswählen |
300 | D | ***** Nachrichten Entitätstyppflege ********************************** |
301 | D | Die Beziehung existiert bereits |
302 | D | Entitätstyp existiert bereits |
303 | D | Anlegen nur im Pflegemodus möglich |
304 | D | Entitätstyp & existiert nicht |
305 | D | Entitätstyp ist logisch gelöscht |
306 | D | Entitätstyp wurde gesichert |
307 | D | Entitätstyp wurde logisch gelöscht |
308 | D | Entitätstyp war bereits logisch gelöscht |
309 | D | Löschen ist nur im Pflegemodus möglich |
310 | D | Variante '00' darf nicht gelöscht werden (Es existieren noch Varianten) |
311 | D | Entitätstyp & ist nicht vorhanden |
312 | D | Es sind nur 8 Stellen des Namens signifikant |
313 | D | Spezialisierungsart & & ist nicht vorhanden (Bitte Namen prüfen) |
314 | D | Es gibt keine vorige Beziehung |
315 | D | Es gibt keine nächste Beziehung |
316 | D | Es gibt keine vorige Spezialisierungsart |
317 | D | Es gibt keine nächste Spezialisierungsart |
318 | D | Es gibt keinen vorigen Entitätstyp |
319 | D | Es gibt keinen nächsten Entitätstyp |
320 | D | Keine ausgehenden Beziehungen vorhanden |
321 | D | Keine Generalisierungen vorhanden |
322 | D | Keine Spezialisierungen vorhanden |
323 | D | Variante wurde gelöscht |
324 | D | Nichts gesichert, da keine Aliasnamen vorhanden sind |
325 | D | Keine Aliasnamen vorhanden |
326 | D | Bitte die Eingabefelder ausfüllen |
327 | D | Entitätstyp & ist gesperrt (Daher kann die Bez. nicht angelegt werden) |
328 | D | Neue Rolle &1 angelegt |
329 | D | Die Spezialisierung existiert bereits |
330 | D | Entitätstyp & ist gesperrt (Daher kann die Spez. nicht angelegt werden) |
331 | D | Vom Dictionary übernommene Attribute dürfen nicht geändert werden |
332 | D | Referenzrestriktion ist für diese Beziehung nicht möglich |
333 | D | Bitte den Cursor auf eine der Definitionen positionieren |
334 | D | Bitte Cursor auf Spezialisierungsart positionieren |
335 | D | Keine eingehenden Beziehungen vorhanden |
336 | D | Kardinalität C (& ist hier nicht zulässig) |
337 | D | Es gibt keine nächste Generalisierung |
338 | D | Es gibt keine vorige Generalisierung |
339 | D | Es gibt keine nächste Spezialisierung |
340 | D | Es gibt keine vorige Spezialisierung |
341 | D | Zeiteinheit gelöscht, da Entitätstyp nicht zeitabhängig ist |
342 | D | Der Entitätstyp & ist nicht vorhanden |
343 | D | Der Entitätstyp & existiert bereits |
344 | D | Entitätstyp & ist keinem Objekttyp im Object Repository zugeordnet |
345 | D | Entitätstyp & ist mehr als einem Objekttyp zugeordnet |
346 | D | Es wurden keine ähnlichen Entitätstypen gefunden |
347 | D | Bitte einen gültigen Wert für die Zeiteinheit eingeben |
348 | D | Bitte einen gültigen Wert für die Beziehungsart eingeben |
349 | D | Bitte einen gültigen Wert für die Kardinalität eingeben |
350 | D | ***** Nachrichten Attributpflege - weiter bei 388 *********************** |
351 | D | Bitte ein Datenelement angeben |
352 | D | Datenelement ist nicht aktiv (Bitte Namen prüfen) |
353 | D | Kein aktives Datenelement zum Attribut & |
354 | D | Pflege expliziter Attribute, da kein View zugeordnet |
355 | D | Bitte eine der Attributarten ankreuzen |
356 | D | Semantische oder technische Info ankreuzen |
357 | D | Zugeordneter View & ist nicht vorhanden |
358 | D | Zugeordneter View & hat noch keine Felder |
359 | D | View & ist in Bearbeitung von & |
360 | D | View & ist neu und in Bearbeitung von & |
361 | D | View & ist neu und nicht aktiv |
362 | D | Attribut & zum Entitätstyp & kommt mehrfach vor |
363 | D | Das Datenelement & zum Attribut & ist nicht aktiv |
364 | D | Dem Attribut & wurde kein Datenelement zugeordnet |
365 | D | Die Attribute zum Entitätstyp & sind konsistent |
366 | D | Die Attribute zum Entitätstyp & sind inkonsistent |
367 | D | Bitte einen Attributnamen eingeben |
368 | D | Es sind keine Attribute vorhanden |
369 | D | Das Datenelement & zum Attribut & existiert nicht |
370 | D | ***** Nachrichten Attributpflege Tabellen-/Viewzuordnung***weiter bei 750 |
371 | D | Geerbte Attribute dürfen nicht geändert werden |
372 | D | Tabelle ist nicht aktiv (Bitte Namen prüfen) |
373 | D | Bitte nur eine Tabelle markieren |
374 | D | Die Tabellenzuordnungen zum Entitätstyp & sind konsistent |
375 | D | Die Tabellenzuordnungen zum Entitätstyp & sind inkonsistent |
376 | D | Die Tabelle & ist nicht aktiv |
377 | D | Beim Entitätstyp & wird die Tabelle & mehrfach zugeordnet |
378 | D | Keine Tabellen oder View zugeordnet |
379 | D | Die Tabelle & existiert nicht |
380 | D | & ist ein View (Bitte überprüfen) |
381 | D | Tabelle & ist bereits dem Entitätstyp & zugeordnet |
382 | D | View & ist bereits dem Entitätstyp & zugeordnet |
383 | D | Der View & ist nicht aktiv |
384 | D | Der View & existiert nicht |
385 | D | Die Viewzuordnung zum Entitätstyp & ist konsistent |
386 | D | Die Viewzuordnung zum Entitätstyp & ist inkonsistent |
387 | D | Es ist nichts zu prüfen, da keine Zuordnungen vorhanden sind |
388 | D | Es ist nichts zu prüfen, da keine Attribute vorhanden sind |
389 | D | Tabelle &1 und View &2 bisher zugeordnet (View &2 bleibt zugeordnet) |
390 | D | Nichts zu sichern, da keine Zuordnungen vorhanden sind |
391 | D | & ist eine Tabelle (Bitte überprüfen) |
392 | D | Nichts gelöscht, da keine Zuordnungen vorhanden waren |
393 | D | Tabelle(n) oder View werden im Dict. nicht gelöscht(Evtl. selbst löschen) |
394 | D | Tabelle &1 im Dictionary nicht gelöscht (Evtl. selbst löschen) |
395 | D | Weitere zugeordnete Tabelle(n) vorhanden (Ausblenden ist nicht möglich) |
396 | D | Bitte zuerst eine Tabelle oder einen View zuordnen |
397 | D | Nichts zu drucken, da keine Zuordnungen vorhanden sind |
398 | D | View zur Zuordnung vorgeschlagen (Bitte prüfen und evtl. anpassen) |
399 | D | View &1 im Dictionary nicht gelöscht (Evtl. selbst löschen) |
400 | D | *** Nachrichten für Datenmodellhierarchie *** |
401 | D | Bitte die Objekte markieren, die grafisch angezeigt werden sollen |
402 | D | & ist Wurzelknoten, daher ist kein Anhängen als Nachbar möglich |
403 | D | & ist ein Entitätstyp, daher ist kein Einfügen möglich |
404 | D | Die Zuordnung existiert bereits |
405 | D | Die Operation war nicht für alle ausgewählten Objekte möglich |
406 | D | Bitte Datenmodell Anlegen statt Datenmodell-Hierarchie Anlegen wählen |
407 | D | Hierarchie ist verändert (Markierungen können nicht übernommen werden) |
409 | D | Bitte die Objekte markieren, die exportiert werden sollen |
410 | D | Der Wurzelknoten & kann nicht gelöscht werden |
411 | D | Interner Fehler beim Korrektur anlegen |
412 | D | Fehler beim DB-Update (Änderungen sind nicht auf der DB) |
413 | D | & besitzt keine Nachfolger (Pflege der Anzeigeopt. daher nicht möglich) |
414 | D | & ist Entitätstyp (Keine Pflege der Anzeigeoptionen möglich) |
415 | D | Bitte die Objekte markieren, die gedruckt werden sollen |
416 | D | & & wird in keinem Modell verwendet |
417 | D | Die Zuordnung des & & zum Datenmodell & existiert bereits |
418 | D | Durch die Zuordn. von & zu & entstünde ein Zyklus, daher nicht möglich |
419 | D | Die Hierarchie wurde neu aufgebaut |
420 | D | Anzeigeoptionen wurden gesichert |
421 | D | Es wurde mehr als ein Knoten markiert |
422 | D | Standard-Sicht eingeschaltet (Alle Entitätstypen eingeblendet) |
423 | D | Reduzierte Sicht eingeschaltet (Einige Entitätstypen evtl. ausgeblendet) |
424 | D | Kennzahlen unabhängig von Expansion, Cursor, Markierung oder Ausschnitt |
425 | D | Mindestens ein Modell der Hierarchie existiert nicht auf der Datenbank |
426 | D | Es wurden keine Entitätstypen ausgewählt |
427 | D | Bitte stellen Sie den Cursor auf ein Datenmodell |
428 | D | Der Wurzelknoten & ist nicht mehr vorhanden. |
500 | D | ***** Nachrichten fuer Konsistenzchecks UDM ***************************** |
501 | D | Test: &1 &2 &3 &4 |
502 | D | Interner Fehler: & |
503 | D | Zu den Programmabgrenzungen wurden keine Datenmodelle gefunden |
504 | D | Bitte markieren, welche Checks durchzuführen sind |
505 | D | Bitte den Cursor auf eine Zeile mit einem Ankreuzfeld stellen |
506 | D | Fehlende Berechtigung für &1 Datenmodell(e) |
507 | D | Bitte mindestens eine Zeile ankreuzen |
508 | D | Bitte mindestens ein Datenmodell angeben |
509 | D | Für mindestens ein Datenmodell haben Sie keine Berechtigung |
551 | D | Bitte wählen Sie ein Datenmodell aus, das einen Repräsentanten enthält |
600 | D | **** Nachrichten fuer Grafik ******** |
601 | D | Grafik läuft bereits (Sie kann nicht erneut gestartet werden) |
602 | D | Zuordnung des Entitätstyps zum Datenmodell & existiert bereits |
603 | D | Entitätstyp existiert bereits (Bitte in ein Datenmodell einfügen) |
604 | D | Grafik wurde mit Ausnahme beendet (Falsches Grafikprofil) |
605 | D | Grafik wurde mit Ausnahme beendet (Falsche Fenster-ID) |
606 | D | Grafik wurde mit Ausnahme beendet (Fehler im Grafikprofil) |
607 | D | Grafik wurde mit Ausnahme beendet (FRONTEND_ERROR) |
608 | D | Grafik wurde mit Ausnahme beendet (Interner Kommunikationsfehler) |
609 | D | Vor dem Ausführen der Funktion bitte Datenmodell expandieren |
610 | D | Ent.typ wurde neben Datenmodell abgelegt, wird keinem Modell zugeordnet |
611 | D | Entitätstyp ist bereits auf der Grafik, kann nicht eingefügt werden |
612 | D | Dem Entitätstyp ist kein View und keine Tabelle zugeordnet |
613 | D | Es kann nur ein Objekt gelöscht werden (Bitte genau ein Objekt markieren) |
614 | D | Bitte nur ein Datenmodell markieren |
615 | D | Verschiebbarkeit aller Entit. angeschaltet (Sichern, siehe Hilfe) |
616 | D | Verschiebbarkeit wird ausgeschaltet (Positionen werden nicht gesichert) |
617 | D | Diese Grafik ist nicht eingabebereit (Aktuelle Grafik: Data Modeler) |
618 | D | Modell zu groß für Grafik ( >700 Ent.typen ) (Bitte Teilmodell auswählen) |
619 | D | Bitte eine Beziehung zwischen zwei Entitätstypen auswählen |
620 | D | Bitte den Entitätstyp in ein Datenmodell einfügen ( Farbiger Bereich ) |
621 | D | Der Entitätstyp überdeckt ein bereits vorhandenes Objekt |
622 | D | Vor Ausführen der Funktion bitte Business-Objekt markieren |
623 | D | Vor Ausführen der Funktion bitte Entitätstyp markieren |
624 | D | Es wurden keine weiteren Vorgänger/Nachfolger gefunden |
625 | D | Objekttyp ist im Objektrepository nicht vorhanden |
626 | D | Anzeigeoptionen wurden gesichert |
627 | D | Bitte nur einen Entitätstyp markieren |
628 | D | Bitte mindestens einen Entitätstyp oder genau ein Datenmodell markieren |
629 | D | Bitte ein Business-Objekt markieren |
630 | D | Bitte nur ein Business-Objekt markieren |
631 | D | Interner Fehler beim Aufruf von SDU_MARK_TREE_FETCH (Falsche Parameter) |
632 | D | Bitte einen Entitätstyp oder ein BO-Datenmodell markieren |
633 | D | Bitte mindestens ein Datenmodell markieren |
634 | D | Vor Ausführen der Funktion bitte Spezialisierungsart markieren |
635 | D | Vor Ausführen der Funktion bitte Entitätstyp oder Spez.art markieren |
636 | D | Zuordnung von Entitätstyp & zu Datenmodell & wurde gelöscht |
637 | D | Entitätstyp ist auf der Grafik keinem Datenmodell zugeordnet |
638 | D | Zuordnung wurde nicht gelöscht |
639 | D | Vor Ausführen der Funktion mindestens ein Dictionary-Objekt markieren |
640 | D | Verschiebbarkeit wird eingeschaltet (Sichern der Positionen nicht mögl.) |
641 | D | Verschiebbarkeit wird ausgeschaltet (Positionen werden nicht gesichert) |
642 | D | Beziehung von & nach & ( Feld & ) kann nicht angezeigt werden |
643 | D | Ursprüngliche Liste wurde nach Datenmodell(en) gefiltert |
644 | D | Liste wurde nicht verändert ( Aktion abgebrochen oder Treffermenge leer ) |
645 | D | Spezialisierungsarten mit Spezialisierungen wurden nicht ausgeblendet |
646 | D | Entbündeln der Beziehungen wurde eingeschaltet |
647 | D | Entbündeln der Beziehungen wurde ausgeschaltet |
648 | D | Tabellen-Kurzbeschreibung wurde eingeschaltet |
649 | D | Tabellen-Kurzbeschreibung wurde ausgeschaltet |
700 | D | ****** Nachrichten für Attributpflege reserviert ************************ |
701 | D | Löschen nicht notwendig (Keine Attributarten gepflegt) |
702 | D | Nichts zu sichern, Keine Attribute vorhanden |
703 | D | Bitte einen gültigen Wert für das Schlüsselattribut eingeben |
704 | D | Explizite Attribute und Attributarten der DDIC-Attribute werden gelöscht |
705 | D | Sie haben bei Generalisierungen eine Schleife modelliert (Bitte auflösen) |
706 | D | Bitte den Cursor auf gültige Tabelle positionieren |
707 | D | Es gibt nur geerbte Attribute. Bitte Anzeigeoptionen auswählen |
708 | D | Bitte einen gültigen Wert für die Attributsart eingeben |
750 | D | *** Fortsetzung von Tabellen-/View-Zuordnung **************************** |
751 | D | Bitte zulässigen Tabellennamen wählen |
752 | D | Bitte zulässigen Viewnamen wählen |
753 | D | Der View & ist keinem Entitästtyp zugeordnet |
754 | D | Bitte positionieren Sie den Cursor auf einen Tabellen- oder Viewnamen |
800 | D | *-----------Reserviert für Schnittstellen zum BO-Navigator |
801 | D | Navigation nicht möglich, da das Modell nicht von der Art Business-Objekt |
802 | D | Dieses Datenmodell ist keinem Objekttyp im Object Repository zugeordnet |
803 | D | Fehlende Berechtigung für Objekttyp & |
804 | D | Das Referenzmodell ist keinem Objekttyp im Object Repository zugeordnet |
820 | D | Zu dieser Komponente ist schon ein Datenmodell zugeordnet |
850 | D | ***** Nachrichten für ADW-Export reserviert ***************************** |
851 | D | Bitte einen gültiges Verzeichnis angeben |
852 | D | Bitte einen Dateipräfix angeben |
853 | D | Bitte wählen Sie mindestens eine Verarbeitungsart aus |
854 | D | Datei kann nicht geschrieben werden |
000 | E | *************** General EDM Messages ************************************ |
001 | E | User & does not exist in the system (please check spelling) |
002 | E | User & only has authorization for language & |
003 | E | User & does not have authorization for the maintenance transaction |
004 | E | Please work in display mode only |
005 | E | User & does not have authorization for level & |
006 | E | Default setting is not possible |
007 | E | User & does not have authorization for language & |
008 | E | EDM authorization of user & was deleted |
009 | E | EDM authorization of user & was copied to & |
010 | E | EDM authorization of user & already exists |
011 | E | EDM authorization of user & does not exist |
012 | E | Enter the names of both users |
013 | E | Enter the name of the user |
014 | E | EDM authorization of user & was saved |
015 | E | User & has no authorization for transaction SIMM |
016 | E | Choose only one function or object |
017 | E | There are no objects corresponding to your selection |
018 | E | Short texts are displayed in the definition |
019 | E | Short texts are suppressed from the definition |
020 | E | Suppress short texts before saving |
021 | E | Enter full key or use F4 help function |
022 | E | Please make entry in field |
023 | E | Display mode is active |
024 | E | Maintenance mode is active |
025 | E | Specify under & only & characters |
026 | E | & does not start with a letter (please check) |
027 | E | & contains blanks (enter without blanks) |
028 | E | & contains a non-alphanumeric character |
029 | E | & is an SAA reserved word. Please choose another word |
030 | E | & may only start with 3 letters |
031 | E | & may only contain figures in the last 7 characters |
032 | E | Definition & was saved |
033 | E | Internal error (Object ID & is not supported) |
034 | E | Please enter a valid command |
035 | E | Log & does not exist |
036 | E | Position cursor on a valid line |
037 | E | Place the cursor on a valid position |
038 | E | & is in customer namespace |
039 | E | No selection made |
040 | E | Internal error |
041 | E | Internal error (Object type & is not defined) |
042 | E | Internal error (Function & has not yet been implemented) |
043 | E | Internal error (Object ID & is not supported) |
044 | E | &1&2&3&4 |
045 | E | Internal error (&1 / &2 / &3) |
046 | E | Internal error: delete object &1 &2 |
047 | E | Field is empty (please make an entry) |
048 | E | User defaults were saved |
049 | E | Use 4 alphanumeric characters |
050 | E | Transfer to display mode (First suppress short text) |
051 | E | Create function can only be used in maintenance mode |
052 | E | Delete function can only be used in maintenance mode |
053 | E | First 8 positions of the name identical to an existing entity type |
054 | E | & contains a hyphen (enter without hyphen) |
055 | E | Attribute name may not be BLANK |
056 | E | Text contains &1 unknown entity type(s) |
057 | E | Data model & could not be locked |
058 | E | Conversion was completed successfully |
059 | E | Enter a valid value for the type |
060 | E | Action canceled |
061 | E | A task with the number & was created |
062 | E | The request/task was locked |
063 | E | Writing of a correction entry for & was cancelled |
064 | E | Only 'Insert below' is possible at root level |
065 | E | No authorization to create or change a view |
066 | E | Data model &1 not found (Data probably not consistent) |
067 | E | Entity type &1 not found (The data probably not consistent) |
068 | E | Definition of SAP object cannot be changed (Please create supplement) |
069 | E | Data must be converted. See help. |
070 | E | SAPscript form open error |
071 | E | Name & has an invalid prefix. Check the spelling |
072 | E | Only the values 'X' and 'Blank' are allowed |
073 | E | Specify a modeling object |
074 | E | Only non-'Blank' values allowed |
075 | E | You have no authorization for Transaction & |
099 | E | Internal error in Data Modeler |
100 | E | ***** Messages For Object-Related General Modules |
101 | E | Object & was reset |
102 | E | Object & was saved |
103 | E | Object & was activated |
104 | E | Object & & was deleted |
105 | E | Object & is new |
106 | E | Only active version of object & exists |
107 | E | Object does not exist |
108 | E | No suitable object found |
109 | E | Object already exists |
110 | E | Object & not active |
111 | E | Object & has already been logically deleted |
112 | E | Object & was logically deleted |
113 | E | & was not deleted |
114 | E | Object & cannot be deleted (refer to log) |
115 | E | Object & does not exist (please create it) |
116 | E | Object & does not exist (please create it in change mode) |
117 | E | First create data model & |
118 | E | Maximum number & has been reached |
119 | E | Choose a valid object |
120 | E | Object & (& does not exist) |
121 | E | Object & was not saved |
122 | E | Temporary version of object & stored |
123 | E | Identical version already stored |
124 | E | &1 was/were saved |
125 | E | &1 was/were deleted |
126 | E | Object &1 is used |
127 | E | Save first (Goto not possible with new object) |
128 | E | Start by removing the references |
160 | E | Processing of table & & has begun |
161 | E | Table & processing successful |
162 | E | Table & processing errors |
163 | E | Conversion of entity type & from & to & ambiguous |
164 | E | Error saving entity type attributes & & |
165 | E | Doc module & save error |
166 | E | &2 of &1 records successfully processed |
180 | E | ***** Version Management Messages to 199 |
181 | E | Version & of & not found |
182 | E | Inconsistency between delta and full versions |
183 | E | Temporary version of object & stored |
184 | E | Identical version already stored |
185 | E | Error restoring the version |
186 | E | Only old versions can be restored |
187 | E | Error storing the version |
188 | E | Version management terminated |
189 | E | Version &1 for &2 was retrieved |
200 | E | **** Messages for Data Model Maintenance ******************************** |
201 | E | Data model & does not exist |
202 | E | Data model & does not exist |
203 | E | Data model & was deleted |
204 | E | Data model & was saved |
205 | E | Data model & was not deleted |
206 | E | Data model & was already logically deleted |
207 | E | Data model & already exists |
208 | E | Choose only one type |
209 | E | The specified color type is not allowed. |
250 | E | **** Message reserved for print modules ********************************* |
251 | E | Please choose a relationship direction |
252 | E | The attribute print option is set implicitly. |
253 | E | Please choose generalization and/or specialization |
300 | E | ***** Messages for Entity Type Maintenance ****************************** |
301 | E | This relationship already exists |
302 | E | Entity type already exists |
303 | E | Create only possible in maintenance mode |
304 | E | Entity type & does not exist |
305 | E | Entity type was logically deleted |
306 | E | Entity type was saved |
307 | E | Entity type was logically deleted |
308 | E | Entity type was already logically deleted |
309 | E | Delete function can only be used in maintenance mode |
310 | E | Variant '00' may not be deleted (variants still exist) |
311 | E | Entity type & does not exist |
312 | E | Only 8 places of the name are significant |
313 | E | Specialization category & & does not exist (check name) |
314 | E | No previous relationship exists |
315 | E | No next relationship exists |
316 | E | No previous specialization category exists |
317 | E | No next specialization category exists |
318 | E | No previous entity type exists |
319 | E | No next entity type exists |
320 | E | No outgoing relationships exist |
321 | E | No generalizations exist |
322 | E | No specializations exist |
323 | E | Variant was deleted |
324 | E | Not saved as no aliases exist |
325 | E | No aliases exist |
326 | E | Make entries in the input fields |
327 | E | Entity type & is locked (Relationship therefore cannot be created) |
328 | E | New role &1 created |
329 | E | This specialization already exists |
330 | E | Entity type & is locked (Specialization therefore cannot be created) |
331 | E | Attributes copied from the Dictionary may not be changed |
332 | E | Reference restriction is not possible for this relationship |
333 | E | Position the cursor on one of the definitions |
334 | E | Position cursor on specialization category |
335 | E | There are no ingoing relationships |
336 | E | Cardinality C (& not allowed here) |
337 | E | No next generalization exists |
338 | E | No previous generalization exists |
339 | E | No next specialization exists |
340 | E | No previous specialization exists |
341 | E | Time unit deleted. Entity type is not time-dependent |
342 | E | Entity type & does not exist |
343 | E | Entity type & already exists |
344 | E | Entity type & is not assigned to any object type in the Object Repository |
345 | E | Entity type & is assigned to more than one object type. |
346 | E | No similar entity types were found |
347 | E | Enter a valid time unit value |
348 | E | Enter a valid relationship type |
349 | E | Enter a valid cardinality |
350 | E | ***** Message Attribute Maintenance - Continue at 388 ******************* |
351 | E | Enter a data element |
352 | E | Data element is not active (check name) |
353 | E | No active data element for attribute & |
354 | E | Maintain explicit attributes, as no view assigned |
355 | E | Select one attribute type |
356 | E | Select semantic or technical info |
357 | E | Assigned view & does not exist |
358 | E | Assigned view & does not yet have any fields |
359 | E | View & is being edited by & |
360 | E | View & is new and is being edited by & |
361 | E | View & is new and is not active |
362 | E | Attribute & of entity type & occurs several times |
363 | E | Data element & of attribute & is not active |
364 | E | No data element was assigned to attribute & |
365 | E | The attributes of entity type & are consistent |
366 | E | The attributes of entity type & are inconsistent |
367 | E | Enter an attribute name |
368 | E | No attributes exist |
369 | E | Data element & of attribute & does not exist |
370 | E | ***** Messages on Attribute Maintenance Table/View Assignment ****see 750 |
371 | E | Inherited attributes may not be changed |
372 | E | Table is not active (please check name) |
373 | E | Select only one table |
374 | E | Assignment of tables for entity type & consistent |
375 | E | Assignment of tables for entity type & inconsistent |
376 | E | Table & is not active |
377 | E | Entity type &: Table & assigned several times |
378 | E | No table or view assigned |
379 | E | Table & does not exist |
380 | E | & is a view (Please check) |
381 | E | Table & is already assigned to entity type & |
382 | E | View & is already assigned to entity type & |
383 | E | View & is not active |
384 | E | View & does not exist |
385 | E | View assignment to entity type & is consistent |
386 | E | View assignment to entity type & is inconsistent |
387 | E | Nothing to check as no assignments exist |
388 | E | Check not necessary, as no attributes exist |
389 | E | Table &1 and view &2 already assigned (View &2 remains assigned) |
390 | E | Nothing to save since no assignments exist |
391 | E | & is a table (Please check) |
392 | E | Nothing deleted since no assignments exist |
393 | E | Table(s) or view not deleted in Dict. (Please delete if required) |
394 | E | Table &1 in Dictionary not deleted (Please delete if required) |
395 | E | More assigned table(s) exist (Suppression not possible) |
396 | E | First assign a table or view |
397 | E | Nothing to print since no assignments exist |
398 | E | View on assignment proposed (Please check and adjust if necessary) |
399 | E | View &1 is not deleted in Dictionary (Delete if required) |
400 | E | *** Messages for the Data Model Hierarchy *** |
401 | E | Select the objects to be displayed in the graphic |
402 | E | & is a root node and cannot be added to as a sibling |
403 | E | & is an entity type, so insertion is not possible |
404 | E | Assignment already exists |
405 | E | Operation was not possible for all selected objects |
406 | E | Select Create data model instead of Create data model hierarchy |
407 | E | Hierarchy has been changed (Selections can not be adopted) |
409 | E | Select the objects which are to be exported |
410 | E | Root node & cannot be deleted |
411 | E | Internal error when creating correction |
412 | E | Error when updating the DB (changes are not in the DB) |
413 | E | & has no successors (Positions therefore cannot be maintained) |
414 | E | & is an entity type (Display options cannot be maintained) |
415 | E | Please mark the objects which are to be printed |
416 | E | & & is not used in any models |
417 | E | Assignment of & & to data model & already exists |
418 | E | Assigning & to & would result in a cycle, so not possible |
419 | E | Hierarchy was set up again |
420 | E | Display options were saved |
421 | E | More than one node was selected |
422 | E | Standard view activated (All entity types shown) |
423 | E | Reduced view activated (Some entity types may be suppressed) |
424 | E | Counts independent of expansion, cursor, selection or focus |
425 | E | At least one hierarchy model does not exist in the database |
426 | E | No entity types were selected |
427 | E | Please position the cursor on a data model |
428 | E | The root node & no longer exists. |
500 | E | ***** Messages for EDM Consistency Checks ******************************* |
501 | E | Test: &1 &2 &3 &4 |
502 | E | Internal error: & |
503 | E | No data models found for the program selections |
504 | E | Select checks to be performed |
505 | E | Position the cursor on a line containing a checkbox |
506 | E | Authorization for &1 data model(s) missing |
507 | E | Select at least one line |
508 | E | Enter at least one data model |
509 | E | You have no authorization for at least one data model. |
551 | E | Please select a data model that contains a representative |
600 | E | **** Graphics Messages ************** |
601 | E | Graphics program is already running (It cannot be started twice) |
602 | E | Entity type is already assigned to data model & |
603 | E | Entity type already exists (Please insert in a data model) |
604 | E | Graphics ended with exception (Incorrect graphics profile) |
605 | E | Graphics ended with exception (Incorrect window ID) |
606 | E | Graphics ended with exception (Error in graphics profile) |
607 | E | Graphics ended with exception (FRONTEND_ERROR) |
608 | E | Graphics ended with exception (Internal communications error) |
609 | E | Expand data model before executing function |
610 | E | Entity type stored in addition to data model. Not assigned to a model. |
611 | E | Graphic already contains entity type, cannot be inserted |
612 | E | No view or table is assigned to the entity type |
613 | E | Only one object can be deleted (Please select just one object) |
614 | E | Select only one data model |
615 | E | Movability of all entities activated (Save, see help) |
616 | E | Movability deactivated (Positions are not saved) |
617 | E | Graphic is not ready for input (Current graphic: Data Modeler) |
618 | E | Model too large for graphic ( >700 ent. types) (Choose submodel) |
619 | E | Select a relationship between two entity types |
620 | E | Insert the entity type into a data model ( colored area ) |
621 | E | The entity type is covering up an existing object |
622 | E | Select business object before executing the function. |
623 | E | Select entity type before executing the function. |
624 | E | No further predecessors/successors found |
625 | E | Object type does not exist in the Object Repository |
626 | E | Display options were saved |
627 | E | Select only one entity type. |
628 | E | Select at least one entity type or exactly one data model. |
629 | E | Select a business object |
630 | E | Select only one business object. |
631 | E | Internal error when calling SDU_MARK_TREE_FETCH (Incorrect parameter) |
632 | E | Select an entity type or a BO data model |
633 | E | Select at least one data model |
634 | E | Before executing the function please select specialization type |
635 | E | Before executing the function please select entity type or spec. type |
636 | E | Assignment of entity type & to data model & was deleted |
637 | E | Entity type is not assigned to a data model in the graphic |
638 | E | Assignment was not deleted |
639 | E | Mark at least one DD object before performing the function |
640 | E | Movability enabled (positions can not be saved) |
641 | E | Movability deactivated (Positions are not saved) |
642 | E | Relationship from & to & (field &) can not be shown |
643 | E | Original list filtered by data model(s) |
644 | E | List not changed ( action interrupted or hit list empty ) |
645 | E | Specialization types with specializations are not hidden |
646 | E | Unbundling of the relationships was switched on |
647 | E | Unbundling of the relationships was switched off |
648 | E | Table short text was switched on |
649 | E | Table short text was switched off |
700 | E | ****** Messages for Attribute Maintenance ******************************* |
701 | E | Deletion not necessary (No attribute types were maintained) |
702 | E | Nothing to save, no attributes exist |
703 | E | Please enter a valid value for the key attribute |
704 | E | Explicit attributes and attribute types of DDIC attributes were deleted |
705 | E | You modeled a loop in the generalizations (Please remove) |
706 | E | Position the cursor on a valid table |
707 | E | There are only inherited attributes. Please select display options. |
708 | E | Please enter an allowed value for the attribute type |
750 | E | *** Continuation of tables / view assignment **************************** |
751 | E | Select valid table name |
752 | E | Select valid view name |
753 | E | The view & is not assigned to an entity type |
754 | E | Position the cursor on a table or view name |
800 | E | * Reserved for interfaces to the BO Navigator |
801 | E | Navigation not possible since the model has diff. category than bus. obj. |
802 | E | No object type exists in Object Repository for this data model |
803 | E | Authorization missing for object type &. |
804 | E | Reference Model not assigned to an object type in the Object Repository |
820 | E | A data model has already been assigned to this component |
850 | E | ***** Messages reserved for ADW export ********************************** |
851 | E | Please enter a valid path name |
852 | E | Please enter a file prefix |
853 | E | Please select at least one processing type |
854 | E | Cannot write to file |