This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class R8 (Nachrichten aus der Metadaten-Generierung) is a standard Message Class in SAP ERP and is part of the package RSU0.
Message Class | R8 |
Short Text | Nachrichten aus der Metadaten-Generierung |
Package | RSU0 |
ID | Language | Text |
---|---|---|
000 | D | *** Nachrichten aus der Metadaten-Generierung *** |
001 | D | Das InfoObject &1 für &2 konnte nicht angelegt werden |
002 | D | InfoObject & wurde angelegt |
003 | D | InfoObject &1 mit Typ KYF verlangt ein gültiges Einheitenfeld |
004 | D | zugeordnetes Einheitenfeld &1 hat kein gültiges InfoObject |
005 | D | zugeordnetes Einheitenfeld &1 muß InfoObject-Typ UNI haben |
006 | D | nicht gesichert! das InfoObject & kann nur einmal verwendet werden |
007 | D | nicht gesichert! & ist kein gültiges InfoObject ( bitte erst anlegen ) |
008 | D | Die Zuordnung wurde gesichert |
009 | D | InfoObject &1 existiert bereits |
010 | D | InfoObject & vom Typ Kennzahl existiert noch nicht |
011 | D | Die Zuordnung ist noch nicht fehlerfrei, sehen Sie im LOG nach |
012 | D | Es sind Fehler aufgetreten, sehen Sie im Protokoll nach |
013 | D | InfoObject &1 konnte nicht angelegt werden |
014 | D | InfoObject &1 soll mit einem unzulässigen Typ angelegt werden |
015 | D | InfoObject &1 konnte nicht angelegt werden, es fehlen Parameter |
016 | D | Sofort Abbruch! dem InfoSource-Feld &1 fehlt das Datenelement |
017 | D | Die Bearbeitung wurde durch den Benutzer abgebrochen |
018 | D | Es sind Fehler aufgetreten, sehen Sie im Protokoll nach |
019 | D | Das Datenelement &1 kommt mehrmals in der Feldliste vor! |
020 | D | InfoObject &1 wurde nicht angelegt, das Datenelement existiert schon |
021 | D | InfoSource &1 nicht gesichert, es sind dafür keine Daten im Puffer |
022 | D | Dem InfoSource-Feld &1 wurde ein ungültiges InfoObject &2 zugeordnet |
023 | D | Für InfoObject &1 fehlt das geklammerte InfoObject &2 |
024 | D | Die InfoSource &1 ist noch nicht vollständig gepflegt |
025 | D | Das InfoObject &1 hat nicht den passenden Typ für diese Zuordnung |
026 | D | Das InfoObject &1 hat nicht die gleiche INTLEN wie das InfoSource-Feld |
027 | D | InfoObject &1 wurde nicht angelegt, Name muß mit Buchstaben beginnen |
028 | D | InfoObject &1 wurde angelegt, Datenelement existiert aber schon |
029 | D | Dem Feld &1 wurde noch kein InfoObject zugeordnet |
030 | D | InfoObject &1 wurde nicht angelegt, (Namenslänge nur max. 10 Zeichen) |
031 | D | InfoObject &1 wurde nicht angelegt, Namenslänge max.10+ 1 führende Ziffer |
032 | D | dem InfoObject &1 zugeordnetes Einheitenfeld muß InfoObject &2 haben |
033 | D | Datenelement &: Länge ist > 32 ( oder > 60 bei Attributen ). |
034 | D | InfoObject &1 wurde nicht angelegt, (Namenslänge min. 3 Zeichen) |
035 | D | Bitte markieren Sie mindestens eine Zeile. |
036 | D | Die InfoSource &1 existiert nicht. |
037 | D | Das InfoObject &1 existiert nicht. |
038 | D | Wiederholen Sie diese Aktion zu einem späteren Zeitpunkt noch einmal. |
039 | D | Zum Datentyp &1 des Feldes &2 kann kein InfoObjecttyp &3 angelegt werden. |
040 | D | Es wurden keine Fehler gefunden. |
041 | D | Die eingegebenen Metadaten sind unvollständig |
042 | D | Metadaten-Generierung: Das System ist an kein BW System angeschlossen |
043 | D | Zu dieser Selektion existieren keine DataSourcen |
044 | D | Die Extraktstruktur &1 konnte nicht generiert werden |
045 | D | Die Struktur &1 Feld &2 ist ungültig |
046 | D | Kein eindeutiger Kurzname für DataSource &1 |
047 | D | Profilparameter '&1' konnte nicht gelesen werden: Fehlercode ist &2 |
048 | D | ************************************************************************* |
049 | D | * Aktuelle Werte ausgewählter Profilparameter * |
050 | D | * &1 &2 |
051 | D | |
052 | D | Segmentierte DataSources (Typ 'SEGM') sind nicht allgemein freigegeben |
053 | D | Es existiert keine gültige Anwendungskomponenten-Hierarchie |
054 | D | Übernahme der Hierarchie aus dem Content nur im Dialog möglich |
055 | D | Die Metadaten zur DataSource &1 sind unvollständig oder fehlerhaft |
060 | D | Bisherige Pflege-Oberfläche über Transaktionscode RSA2OLD erreichbar |
070 | D | Fehler bei Berechtigungsprüfung (S_RO_OSOA) |
071 | D | Keine Berechtigung zum Anzeigen der DataSource &1, Komponente &2 |
072 | D | Keine Berechtigung zum Pflegen der DataSource &1, Komponente &2 |
073 | D | Keine Berechtigung zur Extraktion aus DataSource &1, Komponente &2 |
100 | D | * Nachrichten aus der Metadaten-Konsistenzprüfung |
101 | D | Anwendungskomponente & ist nicht in Tabelle DF14L enthalten |
102 | D | Anwendungskomponente &: Eintrag in Tabelle ROAPPL nicht vollständig |
103 | D | Anwendungskomponente &: Fehlende Beschreibung in Sprache & |
104 | D | InfoSource &: Fehlerhafter Eintrag in Tabelle ROIS |
105 | D | InfoSource &: Fehlende Beschreibung in Sprache & |
106 | D | InfoObject &: Fehlender Eintrag in zugehöriger Basistabelle |
107 | D | InfoObject &: Unvollständiger Eintrag in zugehöriger Basistabelle |
108 | D | InfoObject & wird nicht verwendet |
109 | D | InfoSource &: Veraltete Einträge in Tabelle ROISIOBJ |
110 | D | InfoObject &: Fehlender Eintrag in Tabelle RODIOBJCMP |
111 | D | Kennzahl &: Eintrag in RODKYF ohne Kopfeintrag in RODIOBJ |
112 | D | Merkmal &: Eintrag in RODCHA ohne Kopfeintrag in RODIOBJ |
113 | D | Basismerkmal &: Eintrag in RODCHABAS ohne Kopfeintrag in RODCHA |
114 | D | Basismerkmal &: Eintrag in RODIOBJCMP ohne Kopfeintrag in RODCHABAS |
115 | D | Einheit &: Eintrag in RODUNI ohne Kopfeintrag in RODIOBJ |
116 | D | InfoSource &: Fehlender Eintrag in Tabelle ROIS |
117 | D | InfoSource &: Fehlender Eintrag in Tabelle ROISIOBJ |
118 | D | Fehlerhafter Input ( Rois-Struktur: & ) für Feldliste |
119 | D | Zugeordnetes InfoObject & ist nicht in Tabelle RODIOBJ angelegt |
120 | D | Zeitmerkmal &: Eintrag in RODTIM ohne Kopfeintrag in RODIOBJ |
121 | D | InfoSource &: enthält falsche Zuordnung eines Einheitenfeldes |
122 | D | InfoObject &: Einträge wurden gelöscht |
123 | D | InfoObject &: zugeordnete Einheit existiert nicht |
124 | D | InfoObject &: mit TYP 'NUM' wurde eine Einheit zugeordnet |
125 | D | InfoObject &: hat eine Länge > 32 |
126 | D | Basismerkmal &: die Stammdaten-Tabelle existiert nicht |
127 | D | Basismerkmal &: die Text-Tabelle existiert nicht |
128 | D | InfoSource &: Kein Update-Mode unterstützt |
129 | D | InfoSource &: Delta-Update und Delta-INIT wurden einzeln erlaubt |
130 | D | InfoSource &1: die ( Structure, View, API...) &2 ist nicht ok |
131 | D | InfoSource &1: für kein Feld wurde die Selektion erlaubt |
132 | D | InfoSource &1: für die geklammerten InfoObjects von &2 fehlt das Selflag |
133 | D | InfoSource &1: existiert nicht mehr, hat aber noch Texte in ROIST |
134 | D | InfoSource &1: es sind nicht alle geklammerten InfoObjects vorhanden |
135 | D | Das InfoObjekt &1 ist von spez. Bedeutung und darf nicht angelegt werden |
136 | D | Die Domäne &1 kommt nicht in der Extraktstruktur vor. |
137 | D | Transformation InfoSource &1 in DataSource &1 |
138 | D | Transformiere Attribute des Basismerkmal &1 in DataSource &2 |
139 | D | Transformiere Hierarchieklasse &3 des Basismerkmal &1 in DataSource &2 |
140 | D | Schreibe TransferStruktur der DataSource &1 in System &2 nach &3 um... |
141 | D | Einstellungen in RSADMIN gesichert |
142 | D | Verbindung BW Quellsystem &1 vom BW Empfängersystem &2 inaktiviert |
143 | D | Verbindung des Quellsystems &1 zum BW &2 inaktiviert |
144 | D | Erzeuge flache Anwendungskomponentenhierarchie für DataSources |
145 | D | LIS DataSource Event Update bei DataSource &1 |
146 | D | Update der 20A Metadaten Tabellen aus den 12B Metadaten... |
147 | D | Das Einheitenfeld &3 des Feldes &2 der DataSource &1 ist ausgeblendet |
148 | D | Der Name '&1' ist für eine DataSource ungültig |
149 | D | Die Anwendungskomponenten-Hierarchie wurde aus dem Content übernommen. |
150 | D | Pflege von Segmenten für DataSource vom Typ &1 nicht möglich |
151 | D | Unzulässige Transfermethode '&1': Für segm. DataSource nur '2' erlaubt |
152 | D | Unzulässige Extraktionsmethode '&1': Für segm. DS nur 'FS' erlaubt |
153 | D | Es wurde kein Primärsegment definiert |
154 | D | Die Komponente &1 existiert nicht in der Extraktstruktur &2 |
155 | D | Primärsegment &1: unzulässiger interner Datentyp '&2' (nur 'u' erlaubt) |
156 | D | Sekundärsegment &1: unzulässiger interner Datentyp '&2' (nur 'h' erlaubt) |
157 | D | Es wurden keine Segmente definiert |
158 | D | Das Segment &1 ist mehrfach vorhanden |
159 | D | Ungültige Segment-ID |
160 | D | Es wurde kein Feldname für die Object-ID definiert |
161 | D | Unterschiedliche Typdefinition in Segment &1: DataSource &2 - DDIC &3 |
162 | D | Segment &1: Der Feldname der Object-ID &2 existiert in Extraktstruktur |
163 | D | Segment &1: Das Feld &2 existiert nicht in der DDIC-Struktur &3 |
164 | D | Für die Extraktionsmethode &1 nur generische Schnittstelle zulässig |
165 | D | Für DataSources zum Datenabgleich muss Direktzugriff unterstützt werden |
166 | D | Segment &1, Feld &2: Einheitenfeld &3 nicht in diesem Segment vorhanden |
167 | D | Die Content-Version wurde nicht gepflegt -> Hinweis 817476 |
168 | D | Das Kennzeichen für Direktzugriff wurde nicht definiert |
169 | D | XPRA: Deaktivierung der Verbindungen zu den BW-Systemen |
170 | D | XPRA: Wurde bereits am &1 ausgeführt - keine Aktionen notwendig |
171 | D | Die im Content ausgelieferte Deltamethode wird irreversibel übersteuert |
172 | D | Die Extrakstruktur &1 kann nicht angelegt werden |
174 | D | Die beiden Parameter schließen sich gegenseitig aus |
175 | D | Die Parameter wurden gesichert |
177 | D | Feldname &1, Komponente &2: Position &3 - &4 |
178 | D | Feldname &1, Komponente &2: Datenelement &3 - &4 |
179 | D | Unterschied: Feld &4 Spalte &1 Wert &2 - &3 |
180 | D | Transformiere Texte des Basismerkmals &1 in DataSource &2 |
181 | D | Unterschied: Feld &1 Wert &2 - &3 |
182 | D | Unterschied: Feld &1, Wert: &2 - &3 |
183 | D | CO-PA DataSource: Event Update bei DataSource &1 |
184 | D | Generische DataSource: Event Update bei DataSource &1 |
185 | D | Das Delta Verfahren &2 der DataSource &1 erfordert ein Storno Feld |
186 | D | Keine Unterschiede zwischen den Versionen gefunden |
187 | D | &1 &2 fehlt in Version &3 |
188 | D | Unterschied &1 &2, &3: &4 |
189 | D | Das Storno Feld &1 existiert nicht in der ExtraktStruktur der DS &2 |
190 | D | Der Name des Feldes &1 ist länger als 16 Zeichen |
191 | D | Ungültiger Feldname &1 |
192 | D | Der Hierarchie-Name &1 ist ungültig. |
200 | D | *** Service-Programme zur Beseitigung von Inkonsistenzen *** |
201 | D | Kein gültiger Eintrag aufgrund der Selectionskriterien gefunden |
202 | D | Keine Einträge in der Tabelle RSBASIDOC - Inkonsistenz |
203 | D | Die Verbindung Quellsystem & und SAP-BW-System & ist nicht bekannt |
204 | D | Versionsvergleich DataSource &1: &2 - &3 |
206 | D | Das Feld &1 ist in der DataSource &2 Version &3 nicht vorhanden |
207 | D | Der Text der DataSource &1 in Version &2 ist in Sprache &3 nicht gepflegt |
208 | D | Die H.komponente &4 zum Feld &3 der Datasource &1 in Vers. &2 fehlt |
209 | D | Das Feld &1 fehlt in der DataSource &2, Version &3 &4 |
219 | D | Prüfung der DataSource &1. |
234 | D | Der Anwendungkskomponente &1 sind noch DataSources zugeordnet |
235 | D | Der Anwendungskomponente &2 ist in Version &1 keine DataSource zugeordnet |
237 | D | Das Feld &2 der DataSource &1 existiert nicht |
242 | D | Bearbeitung für Partner erst ab Basis Release 4.0 möglich |
243 | D | Die Anwendungshierachie existiert bereits ---> Kein Anlegen erforderlich |
244 | D | Die Anwendungskomponenten-Hierachie &1 existiert bereits |
245 | D | Die Anwendungskomponenten-Hierachie &1 existiert nicht in A-Version |
246 | D | Die Anwendungskomponenten-Hierachie &1 existiert nicht |
247 | D | Ungültige Selektionsoptionen für Feld &1 |
248 | D | Obsolete Selektionsoptionen für Feld &1 bei gewählter Selektion '&2' |
251 | D | Die DataSource &1 hat eine inkonsistente Vers.Info &3 in Sprache &2 |
252 | D | Die DataSource &1 hat eine inkonsistente Schlüsselinfo &3 im ALE Delta |
253 | D | Die DataSource &1 hat eine inkonsistente Vers.Info &3 in Sprache &2 |
254 | D | Die DataSource &1 hat eine inkonsistente Schlüsselinfo &3 in Sprache &2 |
255 | D | Die DataSource &1 hat eine inkonsistente Vers.Info &3 bei Feld &2 |
256 | D | Die DataSource &1 hat eine inkonsistente Schlüsselinfo &3 bei Feld &2 |
257 | D | Die DataSource &1 besitzt die unzulässige Objektversion &2 |
258 | D | Der F4 Typ &3 des Feldes &1 der Datasource &2 ist nicht zulässig |
259 | D | Unzulässiger F4 Extraktor &3 bei Feld &2 der DataSource &1 spezifiziert |
260 | D | Der Matchcode &3 zum Feld &2 der DataSource &1 ist nicht aktiv |
261 | D | Die DataSource &1 ist bei Feld &2 inkonsistent --> keine F4 Hilfe |
262 | D | Es dürfen nicht gleichzeitig ALE und generisches Delta eingeschaltet sein |
263 | D | Es dürfen nur Anwendungskomponenten angelegt werden |
264 | D | Die Anwendungskomponente &1 besitzt noch Unterkomponenten |
265 | D | Es gibt den Vaterknoten &1 nicht |
266 | D | Die Anwendungskomp. &1 gibt es nicht |
267 | D | Die Anwendungskomponente & kann nicht ausgeführt werden |
268 | D | Neben der Wurzel können keine Knoten hängen |
269 | D | Es gibt keine DataSource mit Extraktstruktur &1 |
270 | D | Löschen der DataSource: &1 |
271 | D | Der Funktionsbaustein & existiert nicht oder hat Syntaxfehler |
272 | D | Es wurden keine Inkonsistenzen festgestellt |
273 | D | Die DataSource wurde erfolgreich generiert |
274 | D | Der Funktionsbaustein zur Berechnung des Maximums fehlt |
275 | D | Die DataSource wurde nicht generiert, da der Benutzer abgebrochen hat |
276 | D | Die F4 DataSource &3 des Feldes &2 der DataSource &1 ist nicht verfügbar |
277 | D | Die F4 DS &3 des Feldes &2 der DS &1 ist keine Text Source |
278 | D | Das Deltaverfahren unterstützt keine Extraktion aus mehreren Mandaten |
279 | D | Das Feld & ist deltarelevant aber existiert nicht in der Feldliste |
280 | D | Stornokennzeichen zu &1 gegenüber ausgelieferter Version geändert |
281 | D | Es sind Warnungen aufgetreten (siehe Protokoll) |
282 | D | Es gibt Zusatzinformationen zur DataSource (siehe Protokoll) |
283 | D | Aktion erfolgreich ausgeführt |
284 | D | Realtime ist nur mit Queue- oder Extraktor-Delta möglich |
285 | D | Extrakstruktur &1 der Append-DataSource &2 muss Append ('APPE') sein. |
286 | D | Feld &1 der Append-DS &2 bereits in Standard-DS &3 (D-Version) deklariert |
287 | D | Fehlerhaftes Event &1 bei DataSource &2 |
300 | D | ****************** Hierarchie-Metadaten im Quellsystem ***************** |
301 | D | Wählen Sie eine Hierarchie aus dem Hierarchie-Katalog aus |
302 | D | DataSource & enthält noch keine Zusatzinformationen in der Tabelle & |
303 | D | Fehler bei der Prüfung der Hierarchie-Zusatzinformationen im Quellsystem |
304 | D | Fehler beim Schreiben der Hierarchie-Zusatzinformationen in die Tabelle |
305 | D | Keine Struktur der DataSource & für Hierarchie im Quellsystem gefunden |
306 | D | Keine Hierarchie-Extraktionsfunktion & im Quellsystem vorhanden |
307 | D | Fehler beim Aufruf der Extraktionsfunktion & für Hierarchie im Quellsyst. |
308 | D | Fehler beim Aufruf der Form-Routine & für Hierarchie im Quellsystem |
309 | D | Fehler beim Ende der User-Exit-Funktion & für Hierarchie im Quellsystem |
310 | D | Fehler beim Versenden & der Hierarchie-Tabellen |
311 | D | Keine Metadaten für Hierarchie im Quellsystem & vorhanden |
312 | D | DataSource & mit & muss mit einer Hierarchie-Klasse zuordnen |
313 | D | Fehler in der Prüfungsfunktion & für Zusatzinformationen im Quellsystem |
314 | D | Hierarchie-Zusatzinformationen der DataSource & wurden geändert |
315 | D | Hie-Zusatzinformationen der DataSource & existieren bereits in der & |
316 | D | Klammerungsinformationen der DataSource & existieren bereits in der & |
317 | D | Service APIs für Hierarchien unterstützt kein Extraktionsart & |
318 | D | Das Datenelement & existiert nicht im Quellsystem in der Tabelle & |
319 | D | Die Domäne & existiert nicht im Quellsystem in der Tabelle & |
320 | D | Sie sind nicht zu Aktionen mit der DataSource & berechtigt |
321 | D | Die generierten Objekte der DataSource & konnten nicht gelöscht werden |
322 | D | Die Hier. Zusatz Informationen der DataSource & wurden nicht gelöscht |
323 | D | Prüfungsfunktion & enthält keine vollständige DataSource-Struktur & & |
324 | D | Duplikative Einträge der Klammerungsinformationen sind nicht erlaubt |
325 | D | Keine Berechtigung für die DataSource & |
326 | D | Fehler beim Aufruf einer Funktion & für das Hie.-Katalog im Quellsystem |
327 | D | Kein Hierarchie-Katalog im Quellsystem vorhanden |
328 | D | Fehler beim Aufruf einer Form-Routine & für die Hierarchie im Quellsystem |
329 | D | Keine aktive DataSource mit dem HIER-Typ im Quellsystem vorhanden |
330 | D | Die Länge des Datenelement & existiert nicht im Quellsystem |
331 | D | Abbildung von Dictionary-Typ & auf ABAP-Typ im Quellsystem nicht möglich |
332 | D | Fehler bei der Funktion & zur Ermittlung der Klammerungsinformationen |
333 | D | Gen.Hie.: Hierarchieklasse & existiert nicht. |
334 | D | Gen.Hie.: Datanelement & existiert nicht. |
335 | D | Gen.Hie.: Domain & existiert nicht. |
336 | D | Zum Feld &1 der DS &2 existiert kein entsprechendes F4 Feld im Textextr. |
337 | D | Es gibt kein Textfeld für die F4 Hilfe des Feldes &1 der DataSource &2 |
338 | D | Es gibt keine Extraktionsmethode &1 für die DataSource &2 |
339 | D | In dem Hierarchiesegment &1 fehlt das Feld &2 |
340 | D | Der Typ das Feldes &1 im Hierarchiesegment &2 ist nicht korrekt |
341 | D | Das Hierarchiesegment &1 existiert nicht oder ist nicht aktiv |
342 | D | Das Hierarchiesegment &1 ist nicht äquivalent zur Referenzstruktur &2 |
343 | D | Das Datenelement &1 der DataSource &2 existiert nicht |
344 | D | Das Hierarchiesegment &1 ist nicht kompatibel zur Referenzstruktur &2 |
345 | D | ALE Delta wird nur für Attribute und Texte unterstützt |
346 | D | Der ALE Zeiger &2 der DataSource &1 unterstützt die Tabelle &3 nicht |
347 | D | Die Schlüssel der ALE Delta Infos unterscheiden sich von der DataSource |
348 | D | Zur DataSource &1 sind ALE Zeiger gepflegt. Dies paßt nicht zum Deltaver. |
349 | D | Ale Zeiger können nur zugeordnet werden, falls DataSource ALE Delta verw. |
350 | D | Die Länge des Compound Key &1 der DataSource &2 ist zu lang |
351 | D | Die der DS &1 Objektliste kann nicht aufgenommen werden. |
352 | D | Fehler im Event Segment Schlüssel der DataSource & |
353 | D | Fehler beim Ereignis &2 der DataSource &1 |
354 | D | Die D Version der DataSource & konnte nicht gelöscht werden |
355 | D | Bitte speichern Sie zuerst |
356 | D | Das Deltaverfahren &1 existiert nicht |
357 | D | Das Deltaverfahren &1 ist inkonsistent |
358 | D | Funktionbaustein &1 für Konvertierungsexit &2 nicht vorhanden |
359 | D | Ungültige Extraktstruktur Vorlage &2 der Datasource &1 |
360 | D | Der Recordmode '&1' ist im Fortschreibungsmodus '&2' nicht erlaubt |
361 | D | Der Recordmode '&1' ist ungültig |
362 | D | Der Fortschreibungsmodus '&1' ist unbekannt |
363 | D | Feld &1 des Intervallsegments paßt nicht zum Knotensegment |
364 | D | Es fehlt die Extraktstruktur für das Hierarchiesegment '&1' |
365 | D | Die Extraktstruktur '&1' wurde mit Warnungen aktiviert |
366 | D | Bitte geben Sie ein Delta Verfahren an |
367 | D | Die DataSource & ist inkonsistent |
368 | D | Der Funktionsbaustein &1 ist Fehlerhaft: &2 |
369 | D | Generierung DataSource &1 |
370 | D | DataSource &1 ist keiner gültigen Anwendungskomponente zugeordnet |
371 | D | DataSource &1: Der Schalter zum Paket &2 ist ausgeschaltet |
372 | D | Die DataSource unterstützt nicht die Datentransfermethode 'PSA' |
373 | D | DataSource &1 nicht im After-Import aktivierbar |
374 | D | Eine DataSource kann nur als Blatt in der Hierarchie auftauchen. |
375 | D | Ungültiger Wert für den import Parameter i_maxsize |
376 | D | Fehler bei Selektion: Feld & |
377 | D | Das Genflag der DataSource & besitzt einen unzulässigen Wert |
389 | D | Das Datenelement &1 der DataSource &2 für Feld &3 existiert nicht |
390 | D | Feld &1 mit Referenzfeld &2: Referenztabelle &3 wird durch &4 ersetzt |
399 | D | Die Basis-DataSource &1 zur Append-DataSource &2 existiert nicht. |
400 | D | Ab hier die Nachrichten für MAPI BW2.0 |
401 | D | Programmfehler: Abbruch im BI Service API (Komponenten BC-BW): &1 |
402 | D | Sie sind nicht berechtigt diese Aktion mit der DataSource &1 auszuführen |
403 | D | Das erforderliche Berechtigungsobjekt ist nicht vorhanden |
404 | D | Die DataSource &1 existiert nicht in Version &2 |
405 | D | Die DataSource & existiert bereits |
406 | D | Die Oltp Source &1 gibt es nicht in dieser Version |
407 | D | Sie können die Aktion & nicht mit einer DataSource ausführen |
408 | D | Die DataSource & liegt nicht im Namensraum |
409 | D | Ungültiger Systemtyp & |
410 | D | Die Struktur & ist entweder nicht im ABAP Dictionary aktiv oder ein View |
411 | D | Aktion vom Benutzer abgebrochen |
412 | D | Es fanden keine Änderungen auf der Datenbank statt |
413 | D | Ungültige Extraktionsart, daher ist hier keine F4 Hilfe möglich |
414 | D | Es entsprachen keine Objekte den Selektionsbedingungen |
415 | D | Diese Aktion ist im Anzeigemodus nicht durchführbar |
416 | D | Das Objekt ist bereits genau so gespeichert. Speichern nicht nötig |
417 | D | Die OltpSource ist noch nicht fehlerfrei. |
418 | D | Die Anwendungskomponente &1 der DataSource &2 existiert nicht |
419 | D | Der Kurztext der DataSource &1 ist in der Sprache &2 nicht gepflegt |
420 | D | Der Mitteltext der DataSource &1 ist in der Sprache &2 nicht gepflegt |
421 | D | Der Langtext der DataSource &1 ist in der Sprache &2 nicht gepflegt |
422 | D | Der DataSource Typ &1 der Datasource &2 ist nicht zulässig |
423 | D | Der View &1 der DataSource &2 ist nicht aktiv |
424 | D | Der Extraktionsview &1 der DataSource &2 hat den falschen Typ |
425 | D | ALE Delta muß für den View & eingerichtet werden. |
426 | D | Der Extraktor kann diese Art des Delta nicht unterstützen |
427 | D | Der Extraktor kann das Feld &2 der Extraktstruktur &1 nicht füllen |
428 | D | Unterschiedliche interne Längen des Feldes &1 |
429 | D | Unterschiedliche Datentype des Feldes &1 |
430 | D | Der Funktionsbaustein & ist nicht aktiv |
431 | D | Der Extraktor enthält nicht das Feld & als Import Parameter |
432 | D | Dem Extraktor fehlt der Import Parameter I_REQUNR |
433 | D | Dem Extraktor fehlt der Import Parameter i_maxsize |
434 | D | Dem Extraktor fehlt der Import Parameter i_initflag |
435 | D | Dem Extraktor fehlt der Import Parameter i_updmode |
436 | D | Dem Extraktor fehlt die Ausnahme 'no_more_data' |
437 | D | Dem Extraktor fehlt die Ausnahme 'ERROR_PASSED_TO_MESS_HANDLER' |
438 | D | Der Extraktor besitzt die Ausnahme & |
439 | D | Dem Extraktor fehlt der Tabellenparameter E_T_DATA |
440 | D | Die Extraktions Methode & wird nich unterstützt. |
441 | D | Die Domäne ist nicht aktiv |
442 | D | Die Domäne besitzt keine Festwerte |
443 | D | Die Extraktstruktur ist nicht zulässig. |
444 | D | Die Extraktstruktur &1 der DataSource &2 ist ungültig |
445 | D | DS &3: Das Feld &1 der Anbieter Struktur fehlt in der Extraktstruktur &2 |
446 | D | Die InfoSource wurde erfolgreich gespeichert |
447 | D | Die Metadaten wurden erfolgreich in den Puffer übernommen |
448 | D | Dies Selektionsoption &1 des Feldes &2 der DataSource &3 ist ungültig |
449 | D | DataSource &3: Feld &1 der Extr Strukt &2 nicht in der Anbieterstruktur |
450 | D | Das Einheitenfeld &1 der DataSo. &2 gibt es nicht in der Extr.Struktur &3 |
451 | D | Doku kann nur angelegt werden, wenn die OltpSource gesichert ist |
452 | D | Hierarchie Zusatzinformationen gibt es nur zu Hierarchie DataSource |
453 | D | Die DataSource & mit HIER-Typ enthält keine Hierarchie-Zusatzinfos |
454 | D | Fehler in der Prüfungsfunktion der Hierarchie-Zusatzinformationen |
455 | D | Fehler beim Schreiben in die Hierarchie-Zusatzinformationen-Tabelle |
456 | D | Hierarchie-Zusatzinformationen wurden erfolgreich gespeichert |
457 | D | Hierarchie-Zusatzinformationen der DataSource & existieren bereits |
458 | D | Metadaten-Inkonsistenz zw. DataSource und Hierarchie-Zusatzinformationen |
459 | D | Keine DataSource mit dem HIER-Typ im Quellsystem vorhanden -> 329 |
460 | D | Zur DataSource &1 in Version &2 gibt es keine Hierarchie-Zusatzinfos |
461 | D | Wählen Sie bitte einen Hierarchiename aus |
462 | D | Fehler beim Aufruf einer Funktion & für das Hie.-Katalog im Quells ->326 |
463 | D | Fehler beim Aufruf einer Form-Routine & für die Hierarchie im Que ->328 |
464 | D | Keine Hierarchie-Extraktionsfunktion & im Quellsystem vorhanden (306) |
465 | D | Kein Eintrag in den Hierarchie-Transfer-Tabellen vorhanden |
466 | D | Die DataSource & enthält kein Hierarchieklasse-Typ |
467 | D | Das Datenelement & existiert nicht im Quellsystem in der Tabelle & ->318 |
468 | D | Die Domäne & existiert nicht im Quellsystem in der Tabelle & ->319 |
469 | D | Kein Hierarchie-Katalog im Quellsystem vorhanden -> 327 |
470 | D | Die Aktion wurde vom Benutzer abgebrochen |
471 | D | Keine Unterstützung der BW Release & im Quellsystem möglich |
472 | D | Die InfoSource ist konsistent |
473 | D | Der Extraktor & existiert nicht |
474 | D | Dem Selektionsfeld & wurde kein InfoObject zugeordnet,Info geht verloren |
475 | D | DS &1: Die Extraktions Domäne &2 ist nicht aktiv. |
476 | D | Das Feld & gibt es nicht in der Extrakt Struktur |
477 | D | Das InfoObject & existiert in diesem Oltp nicht. |
478 | D | Die Extraktionsart & wird nicht unterstützt |
479 | D | DS &1: Storno-Feld ist nur bei Bewegungsdaten sinnvoll |
480 | D | Das an das InfoObject &1 geklammerte InfoObject &2 wird nicht versorgt |
481 | D | Das Datenelement &2 des InfoObjects &1 ist nicht aktiv |
482 | D | Das Datenelement &2 des InfoObjects &1 ist nicht aktiv |
483 | D | Beginn der XPRA Phase 1: Transformation 12B Metadaten > 20A Metadaten ... |
484 | D | Beginn der XPRA Phase 3: Transformation 20A Metadaten > 20B Metadaten ... |
485 | D | Ende XPRA Phase 1: Transformation als unnötig erkannt! |
486 | D | ALE Delta nur für Text/Attributs DataSources bei View-Extraktion möglich |
487 | D | Die InfoSource & existiert nicht |
488 | D | Auf dieser Spalte kann nicht sortiert werden |
489 | D | Es sind keine Fehler aufgetreten |
490 | D | Die DataSource & wurde erfolgreich gespeichert |
491 | D | Es liegen weder Fehler noch Warnungen vor |
492 | D | Zur InfoSource & gibt es kein zugehöriges Merkmal |
493 | D | Zur InfoSource & gibt es kein zugehöriges Basismerkmal |
494 | D | Die DataSource & wurde erfolgreich gelöscht |
495 | D | Die DataSource & konnte nicht gelöscht werden |
496 | D | Das Feld &1 kann aufgrund seines Datentyps &2 kein Storno Feld sein |
497 | D | Die Anwendungskomponente & existiert nicht. |
498 | D | Der Text zur Anwendungskomponente &1 ist in Sprache &2 nicht vorhanden |
499 | D | Die Extrakt Struktur & enthält keine Felder |
500 | D | ************* Nachrichten für das zentrale Delta ********************** |
501 | D | Der Mandant & ist im Quellsystem nicht vorhanden |
502 | D | Die Einträge der Delta-Queue konnten nicht gelöscht werden |
503 | D | Die Delta-Queue konnte nicht gelesen werden |
504 | D | Es existieren keine Übertragungsregeln zur DataSource |
505 | D | Es sind noch keine Parameter für die Delta-Übertragung vorhanden |
506 | D | Die Queue ist leer. |
507 | D | Die DataSource & unterstützt keine Delta-Updates |
508 | D | Die Queue & ist im Quellsystem nicht vorhanden |
509 | D | Es sind noch keine BW-Systeme an die DataSource angeschlossen |
510 | D | Ein Repeat der letzten Delta Selektion ist nicht möglich |
511 | D | Unzulässige Selektionsoptionen |
512 | D | Fehler beim Schreiben in Tabelle &. |
513 | D | Die Extraktstr. &1 der DS &2 ist ein View. Dies läßt keinen CustApp zu |
514 | D | Die Metadaten zur Queueverwaltung konnten nicht gelöscht werden |
515 | D | Die Daten der RFC Queue konnten nicht gelöscht werden |
516 | D | Die Selektion für das Feld &1 wurde noch nicht initialisiert |
517 | D | Übernehme Anwendungskomponentenhierarchie &1 aus dem Content... |
518 | D | DS &1: Die Extraktionsdomäne &2 besitzt keine Festwerte |
519 | D | Das InfoObject &1 wird mehreren Feldern zugewiesen |
520 | D | Extraktion aus dem Archiv ist für Extraktionsmethode '&1' nicht möglich |
521 | D | Im Extraktionsbaustein '&1' fehlt der Importing-Parameter I_CALLMODE |
522 | D | Die Anwendungskomponenten-Hierarchie '&1' wurde von D nach A kopiert |
523 | D | Die Anwendungskomp.-Hierarchie '&1' kann nicht nach 'A' kopiert werden |
524 | D | Die Anwendungskomponenten-Hierarchie '&1' kann nicht bearbeitet werden |
525 | D | Die DataSource &1 lässt keine Append-Struktur zu |
526 | D | Die Daten der Queueverwaltung der DataSource & wurden gelöscht |
527 | D | Die Daten der Queue der DataSource & wurden gelöscht |
528 | D | Das generische Delta wurde noch nicht umgesetzt |
529 | D | Das generische Delta für die DataSource & wurde bereits umgesetzt |
530 | D | Das generische Delta der DataSource & wurde umgesetzt |
531 | D | Die Deltaverwaltung der DataSource & konnte nicht gelesen werden |
532 | D | Die generische Deltaverwaltung wurde komplett umgesetzt |
533 | D | Der BI-Agent zur DataSource &1 konnte nicht deregistriert werden |
534 | D | Extraktionsmethode 'CA' nur für Basis Release 7.10 und höher erlaubt |
535 | D | ESR-Attribute nur für Basis-Release 7.10 und höher pflegbar |
536 | D | Selektionsoption &1 unzulässig (erlaubt: EQ, NE, LT, LE, GE, GT, CP) |
537 | D | Zu viele Einträge: Baum kann nicht aufgebaut werden |
538 | D | Tabelle &1 ist nicht aktiv vorhanden. |
539 | D | Inkonsistente Tabellen-Daten |
540 | D | Tabellen dürfen nicht mehrfach vorkommen |
541 | D | Nur Bearbeitung der DataSources (Hierarchie ist gesperrt durch &1) |
542 | D | Wählen Sie bitte eine DataSource durch den Cursor oder Markieren aus |
543 | D | Es wurde keine DataSource mit Unterschied zw. A-und D-Version gefunden |
544 | D | Markieren Sie bitte genau eine DataSource |
545 | D | Markieren Sie bitte mindestens eine DataSource |
546 | D | Es sind keine Hierarchie-Knoten unter DataSources erlaubt |
547 | D | Fehler in der Verkettung der Knoten |
550 | D | Sie haben keine DataSources markiert. |
551 | D | Es wurden keine Inkonsistenzen festgestellt |
552 | D | Die Bearbeitung der Objektversion &1 ist nicht möglich |
553 | D | Der Bearbeitungsmodus &1 ist nicht zulässig |
555 | D | Die DataSource & wurde nicht übernommen |
558 | D | Das Löschen der DataSource & ist nur aus der zugehörigen Appl. möglich |
559 | D | Lösche DataSource &1... |
565 | D | Sie haben mehrer DataSources markiert. Bitte markieren Sie nur eine |
568 | D | Sie haben keine DataSource markiert. Bitte markieren Sie gen |
569 | D | Die geradzahlige Länge des DEC-Feldes &1 kann zu Problemen führen |
570 | D | Extraktstruktur enhält unzulässiges Feld &1 mit ABAP-Typ &2 |
571 | D | Das Selektionsfeld &1 hat den nicht unterstützten Typ &2 |
600 | D | Der Request mit der Nummer & ist im Quellsystem nicht bekannt |
601 | D | Die OltpSource & extrahiert ihre Daten nicht über Domänenfestwerte |
602 | D | Abbruch: Program &1, Include &2, Zeile &3 |
800 | D | &&&& |
801 | D | Fehlerhafte Proxy-Daten (Tabelle ROPXCONF) |
802 | D | Daten können nicht über Push gesendet werden |
803 | D | Daten wurden gesendet (asynchrone Verarbeitung) |
804 | D | Daten wurden gesendet (synchrone Verarbeitung) |
890 | D | Alles verkehrt bei H Extraktion &1 |
000 | E | *** Messages from metadata generation *** |
001 | E | InfoObject &1 for &2 could not be created |
002 | E | InfoObject & was created |
003 | E | InfoObject &1 with type KYF requires a valid unit field |
004 | E | Assigned unit field &1 does not have a valid InfoObject |
005 | E | Assigned unit field &1 must have InfoObject type UNI |
006 | E | Not saved! InfoObject & can only be used once |
007 | E | Not saved! & is not a valid InfoObject ( please create first ) |
008 | E | Assignment was saved |
009 | E | InfoObject &1 already exists |
010 | E | InfoObject & of type key figure does not exist yet |
011 | E | The assignment is not yet error-free, please look in the LOG |
012 | E | Errors have occurred, please look in the log |
013 | E | InfoObject &1 could not be created |
014 | E | InfoObject &1 should be created with a disallowed type |
015 | E | InfoObject &1 could not be created, parameters are missing |
016 | E | Terminate at once! Data element is missing for the InfoSource field &1 |
017 | E | The editing was canceled by the user |
018 | E | Errors have occurred, please look in the log |
019 | E | Data element &1 appears several times in the field list! |
020 | E | InfoObject &1 was not created, the data element already exists |
021 | E | InfoSource &1 not saved, there is no data for it in the buffer |
022 | E | Invalid InfoObject &2 was assigned to InfoSource field &1 |
023 | E | Compounded InfoObject &2 is missing for InfoObject &1 |
024 | E | InfoSource &1 not yet completely maintained |
025 | E | InfoObject &1 does not have the suitable type for this assignment |
026 | E | InfoObject &1 does not have the same INTLEN as the InfoSource field |
027 | E | InfoObject &1 was not created, mame must begin with letters |
028 | E | InfoObject &1 was created, but data element exists already |
029 | E | No InfoObject has been assigned to field &1 yet |
030 | E | InfoObject &1 was not created, (name length only max. 10 chars) |
031 | E | InfoObject &1 was not created, name length max.10+ 1 leading digit |
032 | E | The unit field assigend to InfoObject &1 must have InfoObject &2 |
033 | E | Data element &: Length is > 32 ( or > 60 with attributes ). |
034 | E | InfoObject &1 was not created, (name length min. 3 chars) |
035 | E | Select at least one row |
036 | E | InfoSource &1 does not exist. |
037 | E | InfoObject &1 does not exist. |
038 | E | Repeat this activity again later. |
039 | E | You cannot create InfoObject type &3 for data type &1 in field &2 |
040 | E | No errors found. |
041 | E | The specified metadata is incomplete |
042 | E | Metadata generation: System is not connected to a BW system |
043 | E | No DataSources exist for this selection |
044 | E | Extraction structure &1 could not be generated |
045 | E | Structure &1 field &2 is invalid |
046 | E | No unique short name for DataSource &1 |
047 | E | Profile parameter '&1' could not be read: Error code is &2 |
048 | E | ************************************************************************* |
049 | E | * Current Values for Selected Profile Parameters * |
050 | E | * &1 &2 |
052 | E | Segmented DataSources (type 'SEGM') are not generally released |
053 | E | No valid application component hierarchy exists |
054 | E | You can only transfer hierarchies from BI Content in dialog mode |
055 | E | Metadata for DataSource &1 is not complete or contains errors |
060 | E | Previous maintenance interface can be accessed using transaction RSA2OLD |
070 | E | Error in authorization check (S_RO_OSOA) |
071 | E | You do not have authorization to display DataSource &1, component &2 |
072 | E | You do not have authorization to maintain DataSource &1, component &2 |
073 | E | You do not have authorization to extract from DataSource &1, component &2 |
100 | E | * Messages from the meta data consistency check |
101 | E | Application component & is not contained in table DF14L |
102 | E | Application component &: Entry in table ROAPPL not complete |
103 | E | Application component &: Missing description in language & |
104 | E | InfoSource &: Incorrect entry in table ROIS |
105 | E | InfoSource &: Missing description in language & |
106 | E | InfoObject &: Missing entry in relevant Basis table |
107 | E | InfoObject &: Incomplete entry in relevant Basis table |
108 | E | InfoObject & is not used |
109 | E | InfoSource &: Obsolete entries in table ROISIOBJ |
110 | E | InfoObject &: Missing entry in table RODIOBJCMP |
111 | E | Key figure &: Entry in RODKYF without header entry in RODIOBJ |
112 | E | Characteristic &: Entry in RODCHA without header entry in RODIOBJ |
113 | E | Basic characteristic &: Entry in RODCHABAS without header entry in RODCHA |
114 | E | Basic characteristic &: Entry in RODIOBJCMP w/o header entry in RODCHABAS |
115 | E | Unit &: Entry in RODUNI w/o header entry in RODIOBJ |
116 | E | InfoSource &: Missing entry in table ROIS |
117 | E | InfoSource &: Missing entry in table ROISIOBJ |
118 | E | Incorrect input (Rois structure: & ) for field list |
119 | E | Assigned InfoObject & is not created in table RODIOBJ |
120 | E | Time characteristic &: Entry in RODTIM w/o header entry in RODIOBJ |
121 | E | InfoSource &: Contains incorrect assignment of a unit field |
122 | E | InfoObject &: Entries were deleted |
123 | E | InfoObject &: Assigned unit does not exist |
124 | E | InfoObject &: A unit was assigned with TYPE 'NUM' |
125 | E | InfoObject &: Is of length > 32 |
126 | E | Basic characteristic &: the master data table does not exist |
127 | E | Basic characteristic &: the text table does not exist |
128 | E | InfoSource &: No update mode supported |
129 | E | InfoSource &: Delta update and delta INIT permitted individually |
130 | E | InfoSource &1: (Structure, View, API...) &2 not correct |
131 | E | InfoSource &1: Selection not allowed for any field |
132 | E | InfoSource &1: Selfag missing for compounded InfoObjects from &2 |
133 | E | InfoSource &1: No longer exists, but still has texts in ROIST |
134 | E | InfoSource &1: Not all compounded InfoObjects are available |
135 | E | InfoObject &1 cannot be created |
136 | E | Domain &1 is not in the extract structure |
137 | E | Transformation InfoSource &1 in DataSource &1 |
138 | E | Transform attributes for basic characteristic &1 in DataSource &2 |
139 | E | Transforming hier.class &3 for basic characteristic &1 in DataSource &2 |
140 | E | Writing DataSource &1 transfer structure to system &2 by &3 at ... |
141 | E | Settings in RSADMIN have been saved |
142 | E | Connection to BW source system &1 from BW receiver system &2 deactivated |
143 | E | Connection between source system &1 and BW &2 deactivated |
144 | E | Creating flat application component hierarchy for DataSources |
145 | E | LIS DataSource Event Update for DataSource &1 |
146 | E | Update 2.0A metadata tables from 1.2B metadata ... |
147 | E | Units field &3 for field &2 of DataSource &1 is hidden |
148 | E | Name '&1' is invalid for a DataSource |
149 | E | The application component hierarchy was transferred from the Content |
150 | E | Cannot maintain segments for DataSource of type &1 |
151 | E | Invalid transfer method '&1&, '2' only permitted for segmented DataSource |
152 | E | Invalid extract method '&1&, 'FS' only permitted for segmented DataSource |
153 | E | No primary segment defined |
154 | E | Component &1 does not exist in extract structure &2 |
155 | E | Primary segment &1, invalid internal type '&2' (only 'u' allowed) |
156 | E | Secondary segment &1, invalid internal type '&2' (only 'h' allowed) |
157 | E | No segments defined |
158 | E | Segment &1 exists more than once |
159 | E | Invalid segment ID |
160 | E | No field name defined for object ID |
161 | E | Different type definition in segment &1, DataSource &2 - DDIC &3 |
162 | E | Segment &1, field name of object ID &2 exists in extract structure |
163 | E | Segment &1, field &2 does not exist in DDIC structure &3 |
164 | E | Only generic interfaces are allowed for extraction method &1 |
165 | E | Direct access must be supported for DataSources for data reconciliation |
166 | E | Segment &1, field &2: unit field &3 does not exist in this segment |
167 | E | The content version was not maintained -> SAP Note 817476 |
168 | E | Indicator for direct access not defined |
169 | E | XPRA : Deactivating connection to the BW system ... |
170 | E | XPRA: Already executed for &1 - no action necessary |
171 | E | The delta methods in the content are irreversibly overridden |
172 | E | Extraction structure &1 cannot be created |
174 | E | These two parameters are mutually exclusive |
175 | E | Parameters saved |
177 | E | Field name &1, component &2: Position &3 - &4 |
178 | E | Field name &1, component &2: Data element &3 - &4 |
179 | E | Difference in the field list. Field &4 column &1 value &2 - &3 |
180 | E | Transforming texts for the basic characteristic &1 in DataSource &2 |
181 | E | Difference in field &1, value &2 - &3 |
182 | E | Difference in field &1, value: &2 - &3 |
183 | E | CO-PA DataSource: Event Update for DataSource &1 |
184 | E | Generic DataSource: Event Update for DataSource &1 |
185 | E | Delta process &2 for DataSource &1 requires a cancellation field |
186 | E | No differences found between the versions |
187 | E | &1 &2 missing in version &3 |
188 | E | Difference &1 &2, &3: &4 |
189 | E | Cancellation field &1 does not exist in the extract structure of DS &2 |
190 | E | Name of field &1 is longer than 16 characters |
191 | E | Invalid field name &1 |
192 | E | Hierarchy name &1 is invalid |
200 | E | *** Service programs for removing inconsistencies *** |
201 | E | No valid entry found according to the selection criteria |
202 | E | No entries in table RSBASIDOC - Inconsistency |
203 | E | The connection between source system & and SAP BW System & is not known |
204 | E | Compare DataSource &1:&2 - &3 |
206 | E | Field &1 is not available in DataSource &2 version &3 |
207 | E | Text for DataSource &1 in version &2 is not maintained in language &3 |
208 | E | Hier. component &4 for field &3 of DataSource &1 in version &2 missing |
209 | E | Field &1 is missing in DataSource &2 in version &3 &4 |
219 | E | Check for DataSource &1 |
234 | E | No DataSources assigned to application component &1 yet |
235 | E | No DataSources assigned to application component &2 in version &1 |
237 | E | Field &2 for DataSource &1 does not exist |
242 | E | Editing partner possible as of Basis release 4.0 |
243 | E | Application hierarchy exists already -> Creation not necessary |
244 | E | Application component hierarchy &1 already exists |
245 | E | Application component hierarchy &1 does not exist in A version |
246 | E | Application component hierachy &1 does not exist |
247 | E | Invalid selection options for field &1 |
248 | E | Obsolete selection options for field &1 with chosen selection '&2' |
251 | E | DataSource &1 has an inconsistent version.info &3 in language &2 |
252 | E | DataSource &1 has an inconsistent key info. &3 in the ALE delta |
253 | E | DataSource &1 has an inconsistent version.info &3 in language &2 |
254 | E | DataSource &1 has an inconsistent key info. &3 in language &2 |
255 | E | DataSource &1 has an inconsistent vers.info &3 for field &2 |
256 | E | DataSource &1 has an inconsistent key info. &3 for field &2 |
257 | E | DataSource &1 has an invalid object version &2 |
258 | E | The F4 type &3 of the field &1 of the DataSource &2 is not permitted |
259 | E | You specified an invalid F4 extractor &3 in field &2 of DataSource &1 |
260 | E | The matchcode &3 for field &2 of DataSource &1 is not active |
261 | E | The DataSource &1 in field &2 is inconsistent -> no input help |
262 | E | ALE and the generic delta cannot be activated at the same time |
263 | E | Only application components can be created |
264 | E | The application component &1 still has subcomponents |
265 | E | The father node &1 does not exist |
266 | E | There is no application component &1 |
267 | E | The application component & can not be executed |
268 | E | No nodes can hang from the root |
269 | E | There is no DataSource with the extract structure &1 |
270 | E | Deletion of DataSource: &1 |
271 | E | Function module & does not exist or has syntax errors |
272 | E | The system could not find any inconsistencies |
273 | E | The DataSource was generated successfully |
274 | E | Function module for calculating maximum is missing |
275 | E | The DataSource was not generated because the user terminated the process |
276 | E | The F4 DataSource &3 of field &2 of the DataSource &1 is not available |
277 | E | The F4 DS &3 of the field &2 of the DS &1 is not a text source |
278 | E | Delta method does not support extraction from different clients |
279 | E | Field & is delta-relevant, but does not exist in the field list |
280 | E | Cancellation indicator for &1 has been changed from the delivered version |
281 | E | Warnings have occurred (see log) |
282 | E | Additional information exists for DataSource (see log) |
283 | E | Action successfully completed |
284 | E | Real time is only possible with queue or extraction delta |
285 | E | Extraction structure &1 of append DataSource &2 must be append ('APPE') |
286 | E | Field &1 of append DS &2 already declared in standard DS &3 (D version) |
287 | E | Event with errors &1 in DataSource &2 |
300 | E | ****************** Hierarchy Metadata in Source System ***************** |
301 | E | Choose a Hierarchy from the Hierarchy Catalog |
302 | E | DataSource & still does not contain any additional info in table & |
303 | E | Error when checking the hierarchy additional info in the source system |
304 | E | Error when writing hierarchy additional info to the table |
305 | E | No structure of the DataSource & was found for hier. in source system |
306 | E | No hierarchy extraction function & available in source system |
307 | E | Error when calling extraction function & for hierarchy in source system |
308 | E | Error when calling form routine & for hierarchy in source system |
309 | E | Error at end of user exit function & for hierarchy in source system |
310 | E | Error in send & of the hierarchy table |
311 | E | No metadata available for hierarchy in source system & |
312 | E | DataSource & with & must assign with a hierarchy class |
313 | E | Error in check function & for additional information in source system |
314 | E | Hierarchy additional information for DataSource & was changed |
315 | E | Hierarchy additional information for DataSource & already exists in the & |
316 | E | Compound information of DataSource & already exists in the & |
317 | E | Service APIs for hierarchies does not support extraction type & |
318 | E | The data element & does not exist in the source system in table & |
319 | E | The domain & does not exist in the source system in table & |
320 | E | You are not authorized for actions with the DataSource & |
321 | E | The generated objects of DataSource & could not be deleted |
322 | E | The hierarchy additional information for DataSource & were not deleted |
323 | E | Check function & does not contain the complete DataSource structure & & |
324 | E | Duplicate compounding entries are not allowed |
325 | E | No authorization for DataSource & |
326 | E | Error when calling function & for the hier. catalog in source system |
327 | E | No hierarchy catalog in the source system |
328 | E | Error calling the form routine & for the hierarchy in the source system |
329 | E | No active DataSource with the HIER type available in the source system |
330 | E | The length of the data element & does not exist in the source system |
331 | E | Mapping of dictionary type & to ABAP type is not possible in source syst. |
332 | E | Error in function & for determining compounding information |
333 | E | Generated hierarchy: Hierarchy class & does not exist |
334 | E | Generated hierarchy: Data element & does not exist |
335 | E | Genenerated hierarchy: Domain & does not exist |
336 | E | There is no corresponding F4 field in textextr. for field &1 of DS &2 |
337 | E | There is no text field for input help of field &1 of DataSource &2 |
338 | E | No extraction method exists for &1 for DataSource &2 |
339 | E | Field &2 is missing from hierarchy segment &1 |
340 | E | Field type &1 in hierarchy segment &2 is incorrect |
341 | E | Hierarchy segment &1 does not exist or is not active |
342 | E | Hierarchy segment &1 is not equivalent to reference structure &2 |
343 | E | The data element &1 of DataSource &2 does not exist |
344 | E | Hierarchy segement &1 is not compatible with reference structure &2 |
345 | E | ALE delta is only supported for attributes and texts |
346 | E | The ALE pointer &2 of DataSource &1 does not support table &3 |
347 | E | The ALE delta info key is different to the DataSource |
348 | E | ALE pointers maintained for DataSource &1. This is not right for deltaver |
349 | E | ALE pointers can only be assigned if DataSource uses ALE delta |
350 | E | Compound key &1 for DataSource &2 is too long |
351 | E | DS &1 object list cannot be included |
352 | E | Error in event segment key of data source & |
353 | E | Error in event &2 of DataSource &1 |
354 | E | The D version of the DataSource & could not be deleted |
355 | E | Save first |
356 | E | The delta process &1 does not exist |
357 | E | The data process &1 is inconsistent |
358 | E | Function module &1 is not available for conversion exit &2 |
359 | E | Invalid extract structure template &2 of DataSource &1 |
360 | E | Record mode '&1' not allowed in update mode '&2' |
361 | E | Record mode '&1' is invalid |
362 | E | Update mode '&1' is unknown |
363 | E | Field &1 of the interval segments does not match with the node segment |
364 | E | Extract structure is missing for hierarchy segment '&1' |
365 | E | Extract structure '&1' was not activated with warnings |
366 | E | Specify a delta method |
367 | E | The DataSource &1 is inconsistent |
368 | E | The function module &1 has errors: &2 |
369 | E | Generating DataSource &1 |
370 | E | DataSource &1 not assigned to a valid application component |
371 | E | DataSource &1, switch to package &2 is off |
372 | E | DataSource does not support data transfer method 'PSA' |
373 | E | DataSource &1 cannot be archived in after-import |
374 | E | A DataSource can only be a leaf in the hierarchy |
375 | E | Invalid value for the import parameter i_maxsize |
376 | E | Error in selection: field & |
377 | E | The genflag of the DataSource & has an unpermitted value |
389 | E | The data element &1 of the DataSource &2 for the field &3 does not exist |
390 | E | Field &1 with reference field &2: Reference table &3 is replaced by &4. |
399 | E | Basis DataSource &1 for append DataSource &2 does not exist |
400 | E | From here the messages for MAPI BW2.0 |
401 | E | Program error: BI service API (component BC-BW) terminated: &1 |
402 | E | You are not authorized to carry out this action with DataSource &1 |
403 | E | The necessary authorization object is not available |
404 | E | DataSource &1 does not exist in version &2 |
405 | E | The DataSource & already exists |
406 | E | The OLTP source &1 is not available in this version |
407 | E | You can not carry out action & with a DataSource |
408 | E | The DataSource & is not in the namespace |
409 | E | Invalid system type & |
410 | E | The structure & is either not in the ABAP dictionary or it is a view |
411 | E | Action terminated by the user |
412 | E | There were no changes in the database |
413 | E | Invalid extraction type, no input help |
414 | E | No objects matched the selection criteria |
415 | E | This action can not be carried out in display mode |
416 | E | The object has already been saved. You do not need to save. |
417 | E | The OLTP source still has errors |
418 | E | Application component &1 of DataSource &2 does not exist |
419 | E | The short text of DataSource &1 is not maintained in language &2 |
420 | E | The medium text of DataSource &1 is not maintained in language &2 |
421 | E | The long text of DataSource &1 is not maintained in the language &2 |
422 | E | The DataSource type &1 of DataSource &2 is not permitted |
423 | E | The view &1 of DataSource &2 is not active |
424 | E | The extraction view &1 of DataSource &2 has the wrong type |
425 | E | ALE delta must be set up for the view & |
426 | E | The extractor can not support this delta type |
427 | E | The extractor can not fill field &2 of the extract structure &1 |
428 | E | Different internal lengths of field &1 |
429 | E | Different data types of field &1 |
430 | E | Function module & not active |
431 | E | The extractor does not contain the field & as import parameter |
432 | E | The extractor is missing the import parameter I_REQUNR |
433 | E | The extractor is missing the import parameter i_maxsize |
434 | E | The extractor is missing the import parameter i_initflag |
435 | E | The extractor is missing the import parameter i_updmode |
436 | E | The extractor is missing the exception 'no_more_data' |
437 | E | The extractor is missing the exception 'ERROR_PASSED_TO_MESS_HANDLER' |
438 | E | The extractor has the exception & |
439 | E | The extractor is missing the table parameter E_T_DATA |
440 | E | The extraction method & is not supported |
441 | E | The domain is not active |
442 | E | The domain has no fixed values |
443 | E | The extract structure is not permitted |
444 | E | The extract structure &1 of the DataSource &2 is invalid |
445 | E | DS &3: Field &1 of the provider structure is missing in extract str. &2 |
446 | E | The InfoSource was saved successfully |
447 | E | The metadata was successfully transferred to the Buffer |
448 | E | The selection option &1 of field &2 of DataSource &3 is invalid |
449 | E | DataSource &3: Field &1 of extr struct &2 is not in the provider struct. |
450 | E | The unit field &1 of DataSource &2 is not in the extr. structure &3 |
451 | E | Docu can only be created if the OLTP source has been saved |
452 | E | There is only hierarchy additional information for hier. DataSources |
453 | E | DataSource & with HIER type does not have any hierarchy additional info |
454 | E | Error in the check function of the hierarchy additional information |
455 | E | Error writing to the hierarchy additional information table |
456 | E | Hierarchy additional information was saved successfully |
457 | E | Hierarchy additional information of DataSource & already exists |
458 | E | Metadata inconsistencies between DataSource and hier. additional info |
459 | E | No DataSource with HIER type available in source system -> 329 |
460 | E | There is no hier. additional information for DataSource &1 in version &2 |
461 | E | Choose a hierarchy name |
462 | E | Error calling function & for hier. catalog in source system -> 326 |
463 | E | Error calling form routine & for hierarchy in source system -> 328 |
464 | E | No hierarchy extraction function & available in source system (306) |
465 | E | No entry available in the hierarchy transfer table |
466 | E | The DataSource & contains no hierarchy class type |
467 | E | Data element & does not exist in source system in table & -> 318 |
468 | E | Domain & does not exist in source system in table & -> 319 |
469 | E | No hierarchy catalog available in source system -> 327 |
470 | E | The action was terminated by the user |
471 | E | BW Release & is not supported in the source system |
472 | E | InfoSource is consistent |
473 | E | Extractor & does not exist |
474 | E | No InfoObject is assigned to the selection field &. Info is lost. |
475 | E | DS &1: The extraction domain &2 is not active |
476 | E | The field & does not exist in the extract structure |
477 | E | The InfoObject & does not exist in this OLTP |
478 | E | Extraction type & is not supported |
479 | E | DS &1: Cancellation field is only useful for transaction data |
480 | E | The InfoObject &2 that is compounded to IO &1 has not been maintained |
481 | E | Data element &2 of InfoObject &1 is not active |
482 | E | Data element &2 of InfoObject &1 is not active |
483 | E | Start of XPRA phase 1: Transformation 12B Metadata > 20A Metadata... |
484 | E | Start of XPRA phase 3: Transformation 20A metadata > 20B... |
485 | E | End of XPRA phase 1: Transformation unnecessary |
486 | E | ALE delta only possible for text/attribute DataSources in view extraction |
487 | E | InfoSource & does not exist |
488 | E | This column can not be sorted |
489 | E | No errors |
490 | E | DataSource & was saved successfully |
491 | E | There are neither errors nor warnings |
492 | E | There is no corresponding characteristic for InfoSource & |
493 | E | There is no corresponding basis characteristic for InfoSource & |
494 | E | DataSource & has been deleted successfully |
495 | E | DataSource & could not be deleted |
496 | E | Field &1 cannot be a cancellation field - it has the data type &2 |
497 | E | Application component & does not exist |
498 | E | The text for application component &1 is not available in language &2 |
499 | E | The extract structure & contains no fields |
500 | E | ************* Message for the central delta ********************** |
501 | E | Client & is not available in the source system |
502 | E | The delta queue entries could not be deleted |
503 | E | The delta queue could not be read |
504 | E | There are no transfer rules for the DataSource |
505 | E | There are still no parameters available for the delta transfer |
506 | E | The queue is empty |
507 | E | DataSource & does not support delta update |
508 | E | Queue & is not available in the source system |
509 | E | There are still no BW systems connected to the DataSource |
510 | E | You cannot repeat the last delta selection |
511 | E | Inadmissible selection options |
512 | E | Errors writing to table & |
513 | E | The extraction structure &1 of DS &2 is a view. This allows no CustApp |
514 | E | The queue management metadata could not be deleted |
515 | E | The RFC queue data could not be deleted |
516 | E | The selection for the field &1 has still not been initialized |
517 | E | Transfer of application component hier. &1 from Content... |
518 | E | DS &1: The extraction domain &2 has no fixed values |
519 | E | The InfoObject &1 has several fields assigned to it |
520 | E | Extraction from the archive is not possible for extraction method '&1' |
521 | E | Importing parameter I_CALLMODE is missing from extraction module '&1' |
522 | E | Application component hierarchy '&1' copied from D to A |
523 | E | Cannot copy application component hierarchy '&1' to 'A' |
524 | E | Application component hierarchy '&1' cannot be edited |
525 | E | DataSource &1 does not allow append structures |
526 | E | Data in queue management of DataSource & has been deleted |
527 | E | Data in queue of DataSource & has been deleted |
528 | E | Generic delta not converted yet |
529 | E | Generic delta for DataSource & already converted |
530 | E | Generic delta of DataSource & converted |
531 | E | Delta management for DataSource & could not be read |
532 | E | Generic delta management converted completely |
533 | E | Cannot deregister BI agent for DataSource &1 |
534 | E | Extraction method 'CA' only possible in Basis Release 7.10 and higher |
535 | E | ESR attributes can only be maintained in Basis Release 7.10 and higher |
536 | E | Selection option &1 unpermitted (allowed: EQ, NE, LT, LE, GE, GT, CP) |
537 | E | Too many entries: Tree cannot be constructed |
538 | E | Tabelle &1 does not exist in active version |
539 | E | Inconsistent table data |
540 | E | Tables may not appear more than once |
541 | E | Only editing of DataSources (hierarchy locked by &1) |
542 | E | Select a DataSource with the cursor or by highlighting it |
543 | E | No DataSources found with inconsistent A and D versions |
544 | E | Choose exactly one DataSource |
545 | E | Select at least one DataSource |
546 | E | Not possible to have hierarchy nodes under DataSources |
547 | E | Error in concatenation of nodes |
550 | E | You have not selected any DataSources |
551 | E | The system could not find any inconsistencies |
552 | E | Editing of object version &1 is not possible |
553 | E | Editing mode &1 is not permissible |
555 | E | DataSource & has not been transferred |
558 | E | You can only delete DataSource & from the corresponding application |
559 | E | Deleting DataSource &1... |
565 | E | You have chosen several DataSources. Choose only one. |
568 | E | You have chosen no DataSource. Choose one. |
569 | E | The even-numbered length of the DEC field &1 can lead to problems |
570 | E | Extraction structure includes invalid field &1 with ABAP type &2 |
571 | E | Selection field &1 has not-supported type &2 |
600 | E | The request with the number & is not known in the source system |
601 | E | OLTP source & does not extract data with domain fixed values |
602 | E | Abend: Program &1, include &2, line &3 |
800 | E | &&&& |
801 | E | Incorrect proxy data (ROPXCONF table) |
802 | E | Cannot send data using push |
803 | E | Data sent (asynchronous processing) |
804 | E | Data sent (synchronous processing) |
890 | E | H extraction &1 is completely incorrect |