This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class M2 (LIS: Generierung und Fortschreibung von Infostrukturen) is a standard Message Class in SAP ERP and is part of the package MCS.
Message Class | M2 |
Short Text | LIS: Generierung und Fortschreibung von Infostrukturen |
Package | MCS |
ID | Language | Text |
---|---|---|
001 | D | Die Info-Struktur & ist bereits vorhanden (z.B. in Mdt. &) |
002 | D | Informationsstruktur & ist nicht vorhanden |
003 | D | Noch keine Fortschreibungsregeln für & & angelegt |
004 | D | Fortschreibungsregeln für & & wurden ohne Prüfung gesichert |
005 | D | Fehler bei & Fortschreibung Info-Struktur & |
006 | D | Informationsstruktur & wurde generiert |
007 | D | Informationsstruktur & wurde gelöscht |
008 | D | Quelltabelle & bei Applikation & ist unzulässig |
009 | D | Feld &-& ist nicht im Data Dictionary definiert |
010 | D | Physische Tabelle & ist bereits vorhanden |
011 | D | Periodizität der Informationsstruktur & ist nicht gepflegt |
012 | D | Fehler bei Buchungsperiodenermittlung (Info-Struktur &, Variante &, RC &) |
013 | D | Vorlage & & ist nicht vorhanden |
014 | D | Vorschlag Fortschreibungsregeln aus Informationsstruktur & kopiert |
015 | D | Fortschreibungsregeln für & überprüfen |
016 | D | Verarbeitung nicht möglich, verständigen Sie Ihren Verantwortlichen |
017 | D | Wählen Sie nur einen Katalogtyp aus |
018 | D | Wählen Sie einen Katalogtyp aus |
019 | D | Der Feldkatalog ist noch nicht angelegt |
020 | D | Der Feldkatalog ist bereits vorhanden |
021 | D | Geschäftsjahresvariante für den Buchungskreis & ist nicht gepflegt |
022 | D | Fehler & bei der Fortschreibung von Informationsstruktur & |
023 | D | Der Tabellenpool ist im DDIC nicht vorhanden oder nicht aktiv |
024 | D | Positionieren Sie den Cursor auf eine der Listen |
025 | D | Die Tabelle TFCS enthält keine erlaubten Strukturen zur Applikation & |
026 | D | Der Feldkatalog wurde gelöscht |
027 | D | Der Feldkatalog wurde gesichert |
028 | D | Verarbeitung ist nicht möglich, verständigen Sie Ihren Verantwortlichen |
029 | D | & ist kein Feld der Tabelle & |
030 | D | Die Referenzfelder müssen paarweise unterschiedlich sein |
031 | D | Interner Fehler beim Prüfen des Dictionary (Abbruch des Checks) |
032 | D | Pflegen Sie alle Einheiten für die Statistikfortschreibung |
033 | D | Informationsstruktur ist nicht gesichert, Löschen ist nicht notwendig |
034 | D | Beim Löschen der Informationsstruktur trat ein Fehler auf |
035 | D | Beim Sichern der Informationsstruktur trat ein Fehler auf |
036 | D | Die Informationsstruktur wurde gesichert |
037 | D | Wählen Sie mindestens eine Kennzahl aus |
038 | D | Überlauf der Tabelle TMC1 |
039 | D | Die Tabelle TMC1 ist gesperrt, versuchen Sie es später nochmals |
040 | D | Fehler beim Löschen eines Tabelleneintrags |
041 | D | Fehler beim Lesen einer Tabelle |
042 | D | Angefordertes Objekt ist im Moment gesperrt, nur Anzeige möglich |
043 | D | Verarbeitung ist nicht möglich, verständigen Sie Ihren Verantwortlichen |
044 | D | Informationsstruktur & ist noch nicht angelegt |
045 | D | Es ist keine Informationsstruktur zur Vorlage vorhanden |
046 | D | Die Informationsstruktur & ist für die Applikation & nicht angelegt |
047 | D | Der Name liegt im Namensraum der SAP (S000 - S500) |
048 | D | Die Informationsstruktur darf nicht geändert werden |
049 | D | Fehler beim Lesen der Informationsstruktur & aus Tabelle & |
050 | D | Verarbeitung ist nicht möglich, verständigen Sie Ihren Verantwortlichen |
051 | D | Verarbeitung ist nicht möglich, verständigen sie Ihren Verantwortlichen |
052 | D | Generierung der Auswerte-Informationsstruktur nicht möglich |
053 | D | Das angeforderte Objekt wurde nicht gefunden |
054 | D | Fehler bei der Dynpro-Nummernvergabe (Sind schon alle Nummern vergeben?) |
055 | D | Fehler beim Sichern der Informationsstruktur |
056 | D | Fortschreibungsregeln für & & ist bereits vorhanden |
057 | D | Fehler beim Lesen des Programms & |
058 | D | In der Tabelle & fehlt ein Eintrag mit Schlüssel & |
059 | D | Fehler beim Schreiben des Subroutinenpools & |
060 | D | Das Programm & wurde angelegt |
061 | D | Fehler bei der Generierung des Programmes & |
062 | D | Eines der benötigten Objekte ist gesperrt, versuchen Sie es später erneut |
063 | D | Auswertestruktur & wurde erfolgreich generiert |
064 | D | Die Auswertestruktur wird jetzt generiert |
065 | D | Start der Generierung des Programms & |
066 | D | Fehler bei der Generierung der Dynpros |
067 | D | Generierung der Dynpros erfolgreich abgeschlossen |
068 | D | Die Planungsdynpros werden jetzt generiert |
069 | D | Die Informationsstruktur & wurde generiert |
070 | D | Fehler beim Lesen des Includes & |
071 | D | Wählen Sie mindestens ein Merkmal aus |
072 | D | Die Auswertestruktur & wurde gelöscht |
073 | D | Verarbeitung ist nicht möglich, verständigen Sie Ihren Verantwortlichen |
074 | D | Bei zu vielen Feldern wurde der gleiche Name vergegeben |
075 | D | Die Tabelle & enthält keinen Eintrag zum Schlüssel & |
076 | D | Positionieren Sie den Cursor auf eines der Felder |
077 | D | Es werden alle möglichen Kennzahlen genutzt |
078 | D | & & & & |
079 | D | Fehler bei der Kennzahlen-Nummernvergabe (Ist der Nummernraum voll ?) |
080 | D | Der Übernahmereport wird jetzt generiert |
081 | D | Fehler beim Lesen des Reports & |
082 | D | Start der Generierung der allgemeinen Zugriffsroutinen |
083 | D | Die Pflege von SAP-Infostruktur & ist nicht zulässig |
084 | D | Diese Funktion ist im Anzeige-Modus nicht zulässig |
085 | D | Fehler bei der Dynpro-Nummernvergabe |
086 | D | Ein angefordertes Objekt ist z.Zt. gesperrt (Später nochmal versuchen) |
087 | D | Interner Fehler im Sperrsystem (Bitte nochmal versuchen) |
088 | D | Fehler beim Anlegen des Programms & |
089 | D | Das Programm & wurde erfolgreich generiert |
090 | D | Die Informationsstruktur & wurde gelöscht |
091 | D | Die Informationsstruktur kann nicht verändert werden |
092 | D | SAP-Informationsstruktur & darf nicht generiert werden |
093 | D | Kunden-Informationsstruktur & darf von SAP-User nicht generiert werden |
094 | D | Fortschreibungsgruppe & zu Informationsstruktur & nicht transportiert |
095 | D | Die angegebene Tabelle für das Datum enthält keine Datumsfelder |
096 | D | Zur Informationsstruktur & existieren Fortschreibungsdefinitionen |
097 | D | Die Tabelle & ist keine zulässige Quelltabelle |
098 | D | Der allgemeine Planungs-Modulpool wird angepaßt |
099 | D | Geben Sie die Periode in der Form JJJJ/__ ein |
100 | D | Geben Sie die Periode in der Form __.JJJJ ein |
101 | D | Bitte Periode in der Form __/JJJJ eingeben |
102 | D | Bitte Periode in der Form __-JJJJ eingeben |
103 | D | Bitte Periode in der Form JJJJ.__ eingeben |
104 | D | Datumsformat des Benutzerstamms ist nicht interpretierbar |
105 | D | Jahreseingabe größer als 2500 (Bitte Eingabe prüfen) |
106 | D | Der Programmname liegt im reservierten Namensraum für LIS |
107 | D | Die Dynpronummer liegt im reservierten Namensraum für LIS |
108 | D | Zur Einheit & fehlt ein Eintrag in Tabelle TMC6 |
109 | D | Die Einheit & ist für die Kennzahl '&' nicht möglich |
110 | D | Wollen Sie der Info-Struktur eine Geschäftsjahresvariante zuordnen? |
111 | D | Planungscoding nicht generiert, da kein Musterreport in Tabelle TMCZ |
112 | D | Planungsdynpros nicht generiert, da kein Musterreport in Tabelle TMCZ |
113 | D | Mit Parameter MCS='X' ist Pflege der Kundeninfostrukturen unzulässig |
114 | D | Mandant &: Für Kennzahl-ID & ist kein Eintrag in Tab. T730 |
115 | D | Einstellungen für den Mandanten & aktualisiert |
116 | D | Fehler beim Lesen der Tabelle & aus dem Data-Dictionary |
117 | D | Die Tabelle ist im Data-Dictionary nicht vorhanden oder nicht aktiv |
118 | D | Bitte Referenzfeld und Referenztabelle eintragen |
119 | D | Der Feldkatalog liegt im SAP-Namensraum |
120 | D | Der Katalog liegt im Kunden-Namensraum (Kein Transport) |
121 | D | Die Generierung der Info-Struktur ist z.Zt. nicht möglich |
122 | D | Interner Fehler in der Sperrverwaltung |
123 | D | Sie haben keine Berechtigung für diese Aktion |
124 | D | Sie haben keine Berechtigung für diese Applikation |
125 | D | Info-Struktur enthält Daten (Sie darf n. gelöscht o. stark verän. werden) |
126 | D | Es existieren Plandaten (Diese werden gelöscht) |
127 | D | Das Löschen von Info-Strukturen ist z.Zt. nicht möglich |
128 | D | Der Feldkatalog wird gerade von einem anderen Benutzer angelegt |
129 | D | Zur Info-Struktur & existieren Fortschreibungsdefinitionen |
130 | D | Prüfung Konsistenz zw. Info-Struktur-Definition und generierter Struktur |
131 | D | Merkmal & ist in der IS-Def., nicht aber in der gen. Strukt. enthalten |
132 | D | Merkmal & ist in der gen. Strukt., nicht aber in der IS-Def. enthalten |
133 | D | Kennzahl & ist in der IS-Def., nicht aber in der gen. Strukt. enthalten |
134 | D | Kennzahl/Einheit & ist in gen. Struktur, nicht IS-Def. enthalten |
135 | D | Das Feld & hat in der IS-Def. ein anderes Dtel. als die gen. Struktur |
136 | D | Das Feld & hat in der IS-Def. eine andere Domäne als die gen. Struktur |
137 | D | Beim Feld & passen die Einh. von IS-Def. und gen. Struktur nicht zus. |
138 | D | Info-Struktur & wurde noch nicht gesichert |
139 | D | Info-Struktur & ist noch nicht generiert |
140 | D | Info-Struktur-Definition und generierte Struktur sind konsistent |
141 | D | Die Reihenfolge der Merkmale ist in Definition und gen. Struktur versch. |
142 | D | Reihenfolge von Kennz./Einh. ist in Definition und gen. Struktur versch. |
143 | D | Es sind keine Selektionsversionen gespeichert. |
144 | D | Verarbeitung nicht möglich (Bitte Verantwortlichen verständigen) |
145 | D | Es wurden keine Analysen gefunden |
146 | D | Nach dem Merkmal & wurde bereits aufgerissen |
147 | D | Bitte Cursor auf ein Merkmal positionieren |
148 | D | Start der Generierung der Standardanalyse |
149 | D | Die Generierung der Standardanalysen wurde beendet |
150 | D | Bitte die Referenzfelder zu den Info-Strukturfeldern überprüfen |
151 | D | Die Gesamtlänge der ausgewählten Felder ist zu groß |
152 | D | Keine Fortschr. zu Info-Struktur & und FortschrGruppe & |
153 | D | Es wurde kein Protokoll gefunden |
154 | D | Start der Generierung des Einstiegsdynpros |
155 | D | Start der Generierung der Includedynpros |
156 | D | Die Info-Struktur & wurde gelöscht |
157 | D | Datum: &, Uhrzeit: &, Generiert durch: & , Mandant & |
158 | D | Sie haben keine Berechtigung zum Anlegen von Feldkatalogen der Appl. & |
159 | D | Sie haben keine Berechtigung zum Ändern von Feldkatalogen der Appl. & |
160 | D | Sie haben keine Berechtigung zum Anzeigen von Feldkatalogen der Appl. & |
161 | D | Sie haben keine Berechtigung zum Anlegen dieser Info-Struktur |
162 | D | Sie haben keine Berechtigung zum Ändern dieser Info-Struktur |
163 | D | Sie haben keine Berechtigung zum Anzeigen dieser Info-Struktur |
164 | D | Sie haben keine Berechtigung zum Generieren von Info-Strukturen |
165 | D | Start der Generierung des Einstiegsdynpros zur Anteilsfaktorenpflege |
166 | D | Ein angefordertes Objekt ist z.Zt. gesperrt (Später nochmal versuchen) |
167 | D | Bitte die Einträge zu den Einheiten in Tabelle T445E pflegen |
168 | D | Fortschreibungseinstellung für Info-Struktur & übernommen |
169 | D | Sie haben keine Berechtigung zum Löschen der Selektionsversion & |
170 | D | Analysen zu SAP-Info-Strukturen können nur über das Menü gerufen werden |
171 | D | Es wurde der MCS-Parameter gesetzt |
172 | D | Keine Fehler bei der Prüfung der Info-Struktur gefunden |
173 | D | Fehler beim Kopieren/Löschen v. Versionen zu Info-Struktur & |
174 | D | Zur Info-Struktur & existiert eine Pflegeversion. |
175 | D | Die Generierung von Dynpros ist im Moment gesperrt. |
176 | D | Die Info-Struktur ist zwar bereits gesichert, aber nicht generiert |
177 | D | Die Belegart & des Auftrags & ist nicht statistikrelevant. |
178 | D | Der Positionstyp & der Position & ist nicht statistikrelevant |
179 | D | Statistikgruppe zum Auftraggeber &: & |
180 | D | Fortschreibungsgruppe Kopf: & |
181 | D | Verkaufsorganisation: &, Vertriebsweg: &, Sparte: & |
182 | D | Statistikgruppe zur Belegart &: & |
183 | D | Statistikgruppe zum Positionstyp &: & |
184 | D | Statistikgruppe zum Material &: & |
185 | D | Fortschreibungsgruppe zur Position &: & |
186 | D | Fortschreibungsgruppe zum Belegkopf |
187 | D | Fortschreibungsgruppen zu den Belegpositionen |
188 | D | Die Lieferung hat keinen Auftragsbezug |
189 | D | Die Lieferungsart & ist nicht statistikrelevant |
190 | D | Die Fortschreibungsgruppe wird aus dem Auftrag & kopiert |
191 | D | Der Beleg & wurde nicht gefunden |
192 | D | Die FortschrGruppe wird aus Beleg &, Pos. & kopiert |
193 | D | Die Position & zum Beleg & wurde nicht gefunden |
194 | D | Die Position & der Lieferung hat keinen Auftragsbezug |
195 | D | Die Fakturaart & ist statistikrelevant |
196 | D | Die Fakturaart & ist nicht statistikrelevant |
197 | D | Die Fortschreibungsgruppe wird aus dem Lieferschein & kopiert |
198 | D | Der Vorgängerbeleg & wurde nicht gefunden. |
199 | D | Die Faktura besitzt keine Position mit Vorgängerbeleg |
200 | D | * 200 - 299 Reserviert für Batchaufbau und Archivierung von Statistiken * |
201 | D | Die Daten aus dem Auftrag & wurden nicht fortgeschrieben |
202 | D | Fehlerhafter Auftrag... |
203 | D | Fehlerhafter Auftrag... |
204 | D | Fehlerhafter Auftrag... |
205 | D | Fehlerhafter Beleg |
206 | D | Die Daten aus der Lieferung & wurden nicht fortgeschrieben |
207 | D | Fehlerhafte Lieferung |
208 | D | Fehlerhafte Lieferung |
209 | D | Daten aus Auft./Lief. & nicht in Tab. MCVSRFK |
210 | D | Die Daten aus der Faktura & wurden nicht fortgeschrieben |
211 | D | Daten aus Auft./Lief. &, Pos. &, nicht in Tab. MCVSRFP |
212 | D | Auftrag &: Fehler bei Best. statist. Angaben (Keine Fortschreibung) |
213 | D | Liefer. &: Fehler bei Best.des Stat.Kurses (Keine Fortschreibung) |
214 | D | Faktura &: Fehler bei Best.des Stat.Kurses (Keine Fortschreibung) |
215 | D | Der Endzeitpunkt liegt vor dem Bezugszeitpunkt |
216 | D | Der Endzeitpunkt liegt zu weit in der Zukunft |
217 | D | Der Endzeitpunkt liegt vor dem Startzeitpunkt |
218 | D | Die Ist-Daten dürfen nicht gelöscht werden |
219 | D | Sie haben keine Berechtigung zum Neuaufbau der Info-Struktur &. |
220 | D | Sie haben keine Berechtigung Vertriebs-Info-Strukturen neu aufzubauen |
221 | D | Sie schreiben in die Ist-Daten |
222 | D | Es wurden mehr fehlerhafte Belege als die tolerierten & gefunden |
223 | D | Fehlerhafter Lieferschein |
224 | D | Fehlerhafter Lieferschein |
225 | D | Fehlerhafte Faktura |
226 | D | Bitte Version verwenden, die mit '&(' beginnt |
227 | D | Abbruch wegen Zeitüberschreitung: & Belegpositione(n) verbucht |
228 | D | Start der Bearbeitung der Aufträge |
229 | D | Start der Bearbeitung der Lieferungen |
230 | D | Start der Bearbeitung der Fakturen |
231 | D | Die Ist-Version darf nicht gelöscht werden |
232 | D | Fehlerhafter Lieferschein |
233 | D | Ohne Einschränkung der Info-Strukturen kann die Laufzeit sehr hoch werden |
234 | D | Start der Bearbeitung der Materialbelege |
235 | D | Sie haben keine Berechtigung zum Neuaufbau von BCO-Infostrukturen |
236 | D | Es wurde(n) & Belegpositione(n) verbucht |
237 | D | Archiv & kann nicht gelesen werden |
238 | D | Zur DB-Tabelle & existiert in diesem Mandanten keine Info-Struktur |
239 | D | Für die Tabelle & wurde das Archivierungsobjekt & angelegt |
240 | D | Das Feld & kann nicht dimensionslos verwendet werden |
241 | D | Der Abbruchzeitpunkt liegt in der Vergangenheit |
242 | D | Die Struktur & ist eine Auswertestruktur, Funktion nicht möglich. |
243 | D | Die Info-Struktur wurde noch nicht generiert |
244 | D | Bei der Generierung der Programme trat ein Fehler auf |
245 | D | Sie haben keine Berechtigung zur Archivierung der Statistikdaten |
246 | D | Sie dürfen keine Info-Strukturen mit Namen zw. S000 und S500 anlegen |
247 | D | Die Methode & ist nicht für die Quell-Info-Struktur & vorgesehen |
248 | D | Die Methode & ist nicht für die Ziel-Info-Struktur & vorgesehen |
249 | D | Die Struktur & ist eine Auswertestruktur |
250 | D | Das Korrekturwesen erlaubt kein Anlegen von Feldkatalogen |
251 | D | Fehler bei der Generierung des Archivierungsobjektes & |
252 | D | Korrekturwesen verbietet Pflege in diesem Mandanten. Nur Anzeige mögl. |
253 | D | Im Mandanten & existiert bereits eine Info-Struktur & |
254 | D | Eine Auswertestruktur kann nicht umbenannt werden |
255 | D | In Tabelle & wurden & Einträge umgesetzt |
256 | D | In Tabelle & befinden sich & Einträge zur Info-Struktur & |
257 | D | Tabellen für die Planungswerkzeuge |
258 | D | Tabellen für die Statistikfortschreibung |
259 | D | Nachgenerierung der Fortschreibungsprogramme |
260 | D | Tabellen für die Standardanalysen |
261 | D | Kopf der Info-Struktur |
262 | D | Die Variante & zum Programm & ist noch nicht angelegt |
263 | D | Fehler beim Erzeugen eines Jobs |
264 | D | Korrekturwesen verbietet Pflege in diesem System. Nur Anzeige möglich |
265 | D | Fehler bei der Generierung eines temporären Programms |
266 | D | Die Struktur & ist eine interne Info-Struktur |
267 | D | Fehler bei der Generierung der Standardanalyse |
268 | D | Bitte pflegen Sie die Druckparameter |
269 | D | Bitte pflegen Sie den Starttermin |
270 | D | Bitte geben Sie eine Variante ein |
271 | D | Bitte geben Sie einen Benutzernamen an |
272 | D | Sie haben keine Berechtigung zum Ändern der Version & |
273 | D | Zur Info-Struktur existieren noch nicht abgeschlossene Hintergrundjobs |
274 | D | Der Beleg & ist nicht im System vorhanden |
275 | D | Bitte wählen Sie einen vierstelligen Namen zwischen S501 und S999 |
276 | D | Der Name kann nicht mehr für eine Info-Struktur verwendet werden |
277 | D | Sie haben keine Berechtigung zur Auswertung der Info-Struktur & |
278 | D | Info-Struktur gesp. für Benutzer & (Auftrag/Aufgabe &) |
279 | D | Die Fortschreibung darf nur innerhalb eines Systems transportiert werden |
280 | D | Berechtigungsprüfung: Die Selektion '&3' wurde eingeschränkt |
281 | D | Die Methodenpflege ist im Moment gesperrt durch Benutzer & |
282 | D | Die Faktura wurde mit der Fakturaschnittstelle erfaßt |
283 | D | Position & bezieht sich auf eine Lieferung ohne Auftragsbezug |
284 | D | Die Lieferung & wurde nicht gefunden |
285 | D | Zugrundeliegende Lieferung & besitzt Dummy-Auftragsart & |
286 | D | Ermittlung der Fortschreibungsgruppe zur Position & |
287 | D | Es wäre keine Fortschreibung erfolgt |
288 | D | Statistikgruppe zur Lieferungsart &: & |
289 | D | Fortschreibungsgruppe zum Beleg & konnte nicht ermittelt werden |
290 | D | Fortschreibungsgruppe zum Beleg & Pos. & konnte nicht ermittelt werden |
291 | D | Es konnten nicht alle Belege gesperrt werden |
292 | D | Systemfehler: Sperren der Belege |
293 | D | Sie haben keine Berechtigung den Report RMCSCLCC auszuführen |
294 | D | Das Referenzfeld &-& kann nicht verwendet werden |
295 | D | Das Quellfeld &-& kann nicht verwendet werden |
296 | D | Die Einheiten von Quell- und Referenzfeld passen nicht zusammen |
297 | D | Die Fortschreibungsgruppe wird aus der ersten Position kopiert |
298 | D | Info-Struktur & hat keinen Zeitbezug (eingeschränkte Funktionalität). |
299 | D | Info-Struktur & kann nicht als Ziel-Info-Struktur verwendet werden |
300 | D | Bitte legen Sie den Analysezeitraum der gerufenen Analyse manuell fest |
301 | D | Die FortschrGruppe wird aus Lieferschein &, Pos. & kopiert |
302 | D | Fortschreibungsprogramm zur Info-Struktur &: & |
303 | D | ***** Es wird eine Formel, Bedingung oder externe Routine verwendet... |
304 | D | Info-Struktur &: Fortschreibung aktiviert |
305 | D | Info-Struktur &: Fortschreibung nicht aktiviert |
306 | D | Info-Strukturen mit Fortschreibungsregeln |
307 | D | * Kennzahl & der Info-Struktur &: |
308 | D | ***** FortschrGruppe: &, Hierarchie: &, Routine: & |
309 | D | * Mehrere Kennzahlen der Info-Struktur &: |
310 | D | ***** Es wird keine Formel, Bedingung oder externe Routine verwendet |
311 | D | Zum Musterreport fehlt ein Eintrag in Tabelle MCAKVER |
312 | D | Warnung: Die Einheit & benötigt besondere Merkmale |
313 | D | Es werden Warnungen ausgegeben |
314 | D | Warnung: Einheiten können inkonsistent fortgeschrieben werden => prüfen |
315 | D | Internes Problem in der TADIR-Schnittstelle. Returncode = & |
316 | D | Es wurde kein Archiv ausgewählt |
317 | D | Die Methode & zur Verwendung & existiert nicht |
318 | D | Die Methode kann für diese Quell-IS und Ziel-IS nicht verwendet werden |
319 | D | & Datensätze wurden bearbeitet |
320 | D | & Datensätze wurden nicht kopiert/umgesetzt |
321 | D | Ein neuer Job wurde eingeplant. |
322 | D | Programmfehler im LMCS1U03: Applikationsdaten & passen nicht zum VIS. |
323 | D | Die Info-Struktur enthält noch Daten in anderen Mandanten |
324 | D | Es wurden keine Protokolle gefunden |
325 | D | Die Info-Struktur & kann nicht als Vorlage verwendet werden |
326 | D | Bitte verwenden Sie eine Methode oder unterschiedliche Versionen |
327 | D | Das Summierungskennzeichen kann für & nicht gesetzt werden |
328 | D | Listenende wurde erreicht |
329 | D | Listenanfang wurde erreicht. |
330 | D | Bitte positionieren Sie den Cursor auf einen Szenarientitel |
331 | D | Bei Datenbeschaffung über User-Exit ist keine Änderng d. Quelldaten mögl. |
332 | D | Kopieren ist nur innerhalb einer Applikation möglich |
333 | D | Der Name einer Auswertestruktur darf keine Sonderzeichen enthalten |
334 | D | Der Job wurde eingeplant, aber nicht freigegeben. |
335 | D | Bei der Job-Einplanung traten Fehler auf - Schauen Sie in die Übersicht. |
336 | D | In der Version sind bereits Daten vorhanden |
337 | D | Die Bearbeitung der Struktur(en) ist mit dem Programm nicht gestattet! |
338 | D | Verbuchungsabbruch! Fehler beim Einfügen in die Zieltabelle! |
339 | D | Datenziel und -quelle dürfen nicht identisch sein |
340 | D | Datenziel und -quelle sind identisch: Löschen der Quelldaten unmöglich |
341 | D | Die Infostruktur & ist nicht vom Typ 'Standard' |
342 | D | Die Infostruktur & ist nicht vom Typ 'Ohne Periode' |
343 | D | Die Info-Struktur & darf nicht als Ziel-Info-Struktur verwendet werden |
344 | D | Die Struktur & kann nicht im Copy Management bearbeitet werden |
345 | D | Ein Datensatz wurde nicht verarbeitet |
346 | D | Selektierte Daten aus Info-Struktur &, Version & wurden gelöscht |
347 | D | Zum gewählten Szenario existiert keine Vorlage |
348 | D | Datenziel und -quelle müssen identisch sein |
349 | D | Die Info-Struktur & kann nicht ausgewählt werden |
350 | D | Fehler in der Definition der automatischen Zuleselogik |
351 | D | Die Pflege der automatischen Anreicherung ist gesperrt durch & |
352 | D | Für F4-Hilfe bzw. Prüfung auf Zulesefeld bitte Zulesetabelle angeben! |
353 | D | angegebene Zulesetabelle ist keine gültige Datenbanktabelle |
354 | D | Angaben zur Ziel-Infostruktur fehlen! Keine Prüfung bzw. F4 möglich! |
355 | D | Für F4-Hilfe bzw. Prüfung auf Zulesetabelle bitte Zielfeld angeben! |
356 | D | Zielfeld & ist kein gültiges Feld aus Ziel-Infostruktur &! |
357 | D | Angaben zur Quell-Infostruktur fehlen! Keine Prüfung bzw. F4 möglich! |
358 | D | Feld & ist nicht in der Tabelle & enthalten! Gültige Eingaben siehe F4! |
359 | D | Feld & ist keine berechenbare Kennzahl in & Gültige Eingaben siehe F4! |
360 | D | & ist weder ein Feld aus Infostruktur & noch ein gültiger Zahlenwert! |
361 | D | autom. Anreicherung für diese Kombination nicht möglich! Siehe Langtext! |
362 | D | Das Feld & ist kein gültiges Zielfeld zu &! Gültige Eingaben siehe F4! |
363 | D | Tabelle & nicht zum automatischen Zulesen zu Infostruktur & verwendbar! |
364 | D | Das Feld & kann nicht als Zulesefeld aus & verwendet werden! Siehe F4 |
365 | D | Das Feld & ist in Zulesetabelle & nicht enthalten! Bitte F4-Hilfe nutzen! |
366 | D | Bitte vervollständigen Sie die Eingaben zu diesem Datensatz! |
367 | D | Textermittlung nur für gültige Klassenart und Materialnummer |
368 | D | ACHTUNG! Division durch & nicht erlaubt! Bitte Schritt neu definieren! |
369 | D | Generiertes Objekt! Bitte Pflege der Infostruktur (MC22) verwenden. |
370 | D | Das Generieren der LIS-Schnittstelle ist nicht möglich |
371 | D | Bitte geben Sie eine Zielversion an |
372 | D | Kopieren auf die Quellversion nicht möglich |
373 | D | Das Löschen der Zielversion ist nicht möglich |
374 | D | Die Quelltabelle des Neulaufs stimmt nicht mit der alten überein |
375 | D | markierte Zeilen enthalten fehlerhafte Zulesevorschriften! Siehe Langtext |
376 | D | Die Struktur & kann mit diesem Programm nicht bearbeitet werden |
377 | D | Der Benutzerparameter MCS wird im Kundensystem ignoriert |
378 | D | Die Funktionserweiterung ist noch keinem aktiven Projekt zugeordnet |
379 | D | Periode von Ist- und Planversion unterschiedlich - Kopieren nicht mgl. |
380 | D | Der Sekundärindex & (&) konnte nicht wieder aufgebaut werden |
381 | D | Es traten Probleme beim Aufbau der Tabelle & auf |
382 | D | Ende der Bestandswertliste wurde erreicht |
383 | D | Die ausgewählte Kennzahl ist kein Bestandswert |
384 | D | Anfang der Bestandswertliste wurde erreicht |
385 | D | Für die Infostruktur & existiert kein Fortschreibungprogramm |
386 | D | Einheiten bei Bestandswert und Zu-/Abgangsfeld stimmen nicht überein |
387 | D | Kennzahl ohne Summierungskennzeichen nicht als Bestandwert verwendbar |
388 | D | Zugeordnete Bestandswertinformationen werden gelöscht |
389 | D | Dem Bestandswert & sind keine Zu-/Abgangsfelder zugeordnet |
390 | D | Fortschreibungsgenerierung gesperrt für: & & & |
391 | D | Fortschreibung erfolgreich generiert für & & & |
392 | D | Fehler bei Prüfen der Fortschreibung von & & & |
393 | D | Fehler bei Generierung der Fortschreibung von & & & |
394 | D | Keine Neugenerierung erforderlich, da keine eigendef. Fortschreibung |
395 | D | Neugenerierung der Fortschreibung gestartet: & & & |
396 | D | Keine Fortschreibungsdefinition vorhanden: & & & |
397 | D | Bestandswert &: geplegtes Zu-/Abgangsfeld & ist nicht in & vorhanden |
398 | D | Beim Feld & sind die Einheiten zwischen & und & nicht kompatibel |
399 | D | Merkmale bei Info-Struktur & stimmen nicht mit & / & überein |
400 | D | **** 400 - 499 Reserviert für Generierung Fortschreibung ***** |
401 | D | Keine Fortschreibungsregeln der Merkmale für Vorlage & & vorhanden |
402 | D | Namensbereich für Generierung LIS-Fortschreibung reserviert |
403 | D | Generierung Steuertabellen für Fortschreibung |
404 | D | Generierung der Fortschreibung für & & |
405 | D | Prüfung der fortschreibungsrelevanten Daten |
406 | D | Fehler beim Lesen des Vorlage-Reports & |
407 | D | Lesen der Fortschreibungsregeln für & & |
408 | D | Fehler beim Lesen der Tabelle & |
409 | D | Fortschreibungsregeln der Kennzahlen gelesen |
410 | D | Keine Fortschreibungsregeln der Kennzahlen vorhanden |
411 | D | Fortschreibungsregeln der Merkmale gelesen |
412 | D | Keine Fortschreibungsregeln der Merkmale vorhanden |
413 | D | Allgemeine Informationen zur Info-Struktur & gelesen |
414 | D | Keine allg. Informationen zur Info-Struktur & vorhanden (TMC4) |
415 | D | Prüfung der Fortschreibungsregeln für & & |
416 | D | Keine USING-Parameter für Ereignis & in Tabelle TMC20 gepflegt |
417 | D | Fehler beim Lesen NAMETAB-Info für Tabelle & |
418 | D | Keine Umrechnungsroutine von & nach & in TMC6U gepflegt |
419 | D | Keine Statistikhierarchie zur Quelltabelle & in TFCS gepflegt |
420 | D | Keine USING-Parameter für Einheitenumrechnungsroutine in TMC23 gepflegt |
421 | D | Kein Quellfeld für die Einheit & und Ereignis & in TMC24 gepflegt |
422 | D | Fehler beim Generieren TMC2S |
423 | D | Fehler beim Generieren TMC2F |
424 | D | & : FortschrArt fehlt |
425 | D | & : Ereignis fehlt |
426 | D | & : Einheit Kennzahl fehlt |
427 | D | & : Quellfeld fehlt |
428 | D | & : entweder Quellfeld oder Zähler |
429 | D | & : Quelleinheit fehlt |
430 | D | & : Datumsfeld fehlt |
431 | D | & : ProgName oder Formroutine fehlt |
432 | D | & : Merkmal : Quellfeld oder Formel fehlt |
433 | D | & : Merkmal : Länge von Offset fehlt |
434 | D | & : Merkmal : Offset fehlt |
435 | D | Keine Generierung wg. Fehler bei Prüfung der Fortschreibung & & |
436 | D | Quelltabelle & zum Ereignis & nicht erlaubt |
437 | D | Keine Fehler bei Prüfung der Fortschreibung |
438 | D | Bitte Cursor auf Kennzahl positionieren |
439 | D | Fehler bei INSERT Tabelle & |
440 | D | Generierung momentan gesperrt durch andere Transaktion/Benutzer |
441 | D | Keine Berechtigung zum Pflegen der Fortschreibung & & |
442 | D | Keine Berechtigung zum Generieren/Löschen Info-Struktur/Fortschreibung |
443 | D | Pflege von SAP Standard-Fortschreibungen ist unzulässig |
444 | D | Löschen der Fortschreibung & & |
445 | D | Fortschreibungsprogramm & wurde gelöscht |
446 | D | Fortschreibungsprogramm ist noch nicht vorhanden |
447 | D | Aufruf Fortschreibungsroutinen gelöscht (TMC2F) |
448 | D | Noch keine Fortschreibungsroutinen in TMC2F vorhanden |
449 | D | Fortschreibungsregeln der Kennzahlen wurden gelöscht |
450 | D | Fortschreibungsregeln der Merkmale wurden gelöscht |
451 | D | Programmverweis für Fortschreibungsprogramm in & wurde gelöscht |
452 | D | Noch kein Programmverweis in & vorhanden |
453 | D | & & nicht in Verzeichnis fortzuschreibender Info-Strukturen vorhanden |
454 | D | & & aus Verzeichnis der fortzuschreibenden Info-Strukturen gelöscht |
455 | D | Hierarchie & für Ereignis & in Applikation & ist unzulässig |
456 | D | Keine Umrechnung von Quelleinheit & nach Einheit & zulässig |
457 | D | Applikationsspezifische Informationen für Generierung wurden gelesen |
458 | D | Keine Generierungsinformation für Applikation & gefunden |
459 | D | Interner Fehler bei Übernahme Kennzahl & |
460 | D | Info-Struktur & ist nicht aktiv (Keine Fortschreibung nach Generierung) |
461 | D | Interner Fehler beim Lesen der Daten zur Info-Struktur & |
462 | D | Keine Texte zu den Feldern der Info-Struktur & vorhanden |
463 | D | Keine Felder zur Info-Struktur/DDIC-Struktur & / & vorhanden |
464 | D | DDIC-Struktur & zur Info-Struktur & nicht aktiv im Data Dictionary |
465 | D | Keine Zuordnung Formel-/Bedingungsgruppe zu der Applikation & in TMC21 |
466 | D | Formel & ist nicht vorhanden |
467 | D | Formel & ist nicht aktiv |
468 | D | Bedingung & ist nicht vorhanden |
469 | D | Bedingung & ist nicht aktiv |
470 | D | & : Programm & für externe Routine nicht vorhanden |
471 | D | & : Formel & ist nicht vorhanden |
472 | D | & : Formel & ist nicht aktiv |
473 | D | & : Bedingung & ist nicht vorhanden |
474 | D | & : Bedingung & ist nicht aktiv |
475 | D | & : Merkmal : Quelltabelle & zum Ereignis & ist nicht vorhanden |
476 | D | & : Quelltabelle & zum Ereignis & ist nicht vorhanden |
477 | D | & : Quelltabelle & für Datum zum Ereignis & ist nicht vorhanden |
478 | D | & : Hierarchie ist nicht gepflegt |
479 | D | & : Hierarchie nur wenn Quellfeld nicht angegeben |
480 | D | & : Keine Umrechnung von Quelleinheit & nach Einheit & zulässig |
481 | D | & : Kennzahl wird bereits mit anderer Fortschreibungsart & verwendet |
482 | D | Bitte zuerst das Ereignis der Fortschreibung festlegen |
483 | D | Bitte zuerst eine Quelltabelle/Datumstabelle angeben |
484 | D | Kein Verweis auf Pflegetransaktion in Tabelle TMCTC |
485 | D | Ereignis & zur Applikation & nicht zulässig |
486 | D | Keine Berechtigung zur Pflege von Formeln/Bedingungen für Applikation & |
487 | D | & : Merkmal : Entweder Formel oder Quellfeld angeben |
488 | D | & : Merkmal : Hierarchie nicht gepflegt |
489 | D | & : Merkmal : Hierarchie nur bei Formel notwendig |
490 | D | & : Formroutine für Formel/Bedingung & ist nicht vorhanden |
491 | D | & : Merkmal : Formroutine für Formel/Bedingung & ist nicht vorhanden |
492 | D | Formroutine für Formel/Bedingung & ist nicht vorhanden |
493 | D | Keine Fortschreibungsregeln der Kennzahlen für Vorlage & & vorhanden |
494 | D | Noch keine überarbeitete Version vorhanden - Restaurieren nicht notwendig |
495 | D | Keine Fortschreibungsdefinitionen vorhanden |
496 | D | Eingegebenes Feld ist kein Datumsfeld |
497 | D | Generierte Version wiederhergestellt |
498 | D | & : Bei Charakter-Kennzahlen nur FortschArt 'Datentransport' erlaubt |
499 | D | & & & & |
500 | D | Fortschreibungsart paßt nicht zum Typ des Quellfeldes |
501 | D | Keine Ermittlung von Vorschlagswerten möglich |
502 | D | & : Hierarchie der Kennzahl ist höher als die der Merkmale |
503 | D | Interner Fehler |
504 | D | Fehler beim Lesen der internen Tabelle & |
505 | D | & : Bitte prüfen, ob die Angabe einer Hierarchie notwendig ist |
506 | D | Zur Quell-Info-Struktur ist kein Ereignis vorhanden |
507 | D | Die Datenübergabe an die LIS-Engine ist nicht möglich |
508 | D | Auswertestruktur &1 ist in Applikation &2 (&3) nicht vorhanden. |
509 | D | Auswertung & ist bereits vorhanden (Bitte Eingabe prüfen) |
510 | D | Auswertung & ist nicht vorhanden (Bitte Eingabe prüfen) |
511 | D | Vorlageauswertung & ist nicht vorhanden (Bitte Eingabe prüfen) |
512 | D | Auswertung & wird gelöscht |
513 | D | Bitte Merkmale definieren |
514 | D | Bitte Kennzahlen definieren |
515 | D | Auswertestruktur & ist bereits in Tabelle T804A vorhanden. |
516 | D | Keine zum Zielfeld passenden Quellfelder vorhanden |
517 | D | Die Info-Struktur & ist mit anderen Info-Strukturen verbunden |
518 | D | Die Info-Struktur & enthält keine Bestandswerte |
519 | D | Die Bewegungsstruktur & entspricht nicht der Vorlagestruktur & |
520 | D | Auswertung & wurde gesichert |
521 | D | Auswertung & wurde generiert |
522 | D | Auswertung & wurde mit Warnung generiert |
523 | D | Auswertung & konnte nicht generiert werden |
524 | D | Der Info-Strukturtyp '&' ist in Applikation & nicht zulässig |
525 | D | Keine freie Auswertungsnummer in Bibliothek & |
526 | D | Präfix für Auswertungsnummer in Bibliothek & ist nicht gepflegt |
527 | D | Der Layoutreport zur Auswertestruktur existiert nicht |
528 | D | Layoutkontrolle nicht möglich (zu viele Kennzahlen ausgewählt) |
529 | D | Kein Standard-Set für Merkmal & gepflegt |
530 | D | Bitte Spaltenwiederholungen zwischen 2 und & eingeben |
531 | D | Anzahl der Spaltenwiederholungen wird für diesen Typ ignoriert |
532 | D | Standardwert für die Spaltenwiederholung ist & |
533 | D | Keine Kennzahl vorhanden (Bitte Kennzahlen vorher auswählen) |
534 | D | Max. Länge der Formel ist erreicht |
535 | D | Kennzahl ist keine Formel (Bitte Cursor auf Formel positionieren) |
536 | D | & |
537 | D | Verarbeitung ist nicht vorgesehen (Bitte Verantwortlichen verständigen) |
538 | D | Auswertestruktur & wurde generiert |
539 | D | Nummernkreis für Bibliothek zur Auswertestruktur ist erschöpft |
540 | D | Nummernkreis für Sets zur Auswertestruktur ist erschöpft |
541 | D | Nummernkreis für Jobs ist erschöpft |
542 | D | Set & ist bereits vorhanden |
543 | D | Variable & ist bereits vorhanden |
544 | D | Report & ist bereits vorhanden |
545 | D | Bibliothek zur Auswertestruktur & nicht vorhanden (Bitte Eingabe prüfen) |
546 | D | Auswertestruktur &1 ist bereits in Applikation &2 (&3) vorhanden. |
547 | D | Set zum Feld & kann nicht gelöscht werden, wird noch gebraucht |
548 | D | Variable zum Feld & kann nicht gelöscht werden, wird noch gebraucht |
549 | D | SetVar zum Feld & kann nicht gelöscht werden, wird noch gebraucht |
550 | D | Auswertestruktur & wurde gelöscht |
551 | D | Auswertestruktur & kann nicht gelöscht werden, wird noch gebraucht |
552 | D | Nummernvergabe für Bibliothek durch Benutzer & gesperrt |
553 | D | Nummernvergabe für Sets durch Benutzer & gesperrt |
554 | D | Nummernvergabe für Jobs durch Benutzer & gesperrt |
555 | D | Auswertestruktur & ist unverändert, wird nicht generiert |
556 | D | Keine Berechtigung für DD-Struktur & |
557 | D | Keine Berechtigung für Auswertestruktur & |
558 | D | Auswertestruktur ändern: Nur mit Bezug auf DD-Struktur & |
559 | D | Auswertestruktur & liegt im SAP-Namensraum |
560 | D | Auswertung & liegt im SAP-Namensraum |
561 | D | Auswertestruktur & durch Benutzer & gesperrt |
562 | D | Auswertung & durch Benutzer & gesperrt |
563 | D | Keine Berechtigung zum Ausführen der Auswertung & |
564 | D | Commandfile & ist nicht vorhanden |
565 | D | Layoutreport & zur Bibliothek 3AA ist nicht vorhanden |
566 | D | Info-Struktur zur Auswertestruktur & wurde geändert |
567 | D | Info-Struktur zur Auswertestruktur & wurde gelöscht |
568 | D | Auswertestruktur zur Info-Struktur & wurde noch nicht generiert |
569 | D | Bitte Verarbeitungsmodus auswählen |
570 | D | Achtung: Auswertestruktur &1 existiert in mehreren Mandanten! |
571 | D | Fehler beim Lesen einer Formel |
572 | D | Die Bearbeitungsfunktionalität für die Info-Struktur & ist eingeschränkt. |
573 | D | Die Quell-Info-Struktur & hat keine Periodizität! |
574 | D | Die Ziel-Info-Struktur & hat einen anderen Typ als die Quellstruktur & |
575 | D | Für die Info-Struktur & ist keine Fortschreibung vorgesehen |
576 | D | Typ der Info-Struktur & wurde im Mandanten & geändert (TMC4) |
577 | D | Typ der Info-Struktur & bleibt im Mandanten & unverändert (TMC4) |
578 | D | Mandant &: & / & bei IS & bzgl. Verbuchung angepaßt (TMC2F) |
579 | D | Mandant &: Problem bei Anpassung & / & an Verbuchung IS & (TMC2F) |
580 | D | Die Anbindung an das Transportwesen ist nur im Kundensystem möglich. |
581 | D | Der Name einer neuen Auswertestruktur muß mit 'ZF' beginnen. |
582 | D | Mandant &: Verbuchung bei & / & an IS & angepaßt (TMC2S) |
583 | D | Mandant &: Keine Anpassung & / & an IS & (TMC2S) |
584 | D | Kennzahl & in Infostruktur & aber nicht in Infostruktur & vorhanden |
585 | D | Start der Bearbeitung der Transportbelege |
586 | D | Archivierte Belege zur Zeit nicht verarbeitbar |
587 | D | Fehlerhafter Transportbeleg & mit TPArt & Dienstl. & TPDispostelle & |
588 | D | Die Daten aus Transportbeleg & wurden nicht fortgeschrieben |
589 | D | Der ausgewählte Typ ist für die Applikation & nicht zulässig |
590 | D | Die max. Anzahl der Segmente muß größer als die min. Anzahl sein! |
591 | D | Das Objekt & wurde generiert. |
592 | D | Bitte & eingeben |
593 | D | Fortschreibungsgenerierung gesperrt |
594 | D | Für eine Infostruktur vom diesem Typ ist keine Planung möglich |
595 | D | Neugenerierung der Fortschreibung beendet: & & & |
596 | D | Die Bearbeitung der Info-Struktur & ist nicht möglich. |
597 | D | Beim 1. Merkmal & handelt es sich nicht um eine Belegnummer |
598 | D | Bitte geben Sie eine Copy-Methode an |
599 | D | Die Verarbeitung wurde vom Benutzer abgebrochen. |
600 | D | Bitte Cursor auf & positionieren |
601 | D | Bitte Ende des Blocks markieren |
602 | D | Verschiebung bewirkt keine Veränderung |
603 | D | Keine Feldkataloge vorhanden |
604 | D | Verschiebung nur bei zusammenhängender Blockmarkierung möglich |
605 | D | Markierung nicht möglich, da & schon übernommen wurde |
606 | D | Übernahme nicht möglich, da & schon übernommen wurde |
607 | D | Schon übernommene & werden nicht markiert |
608 | D | Tabelle & nicht im Dictionary (Bitte Verantwortlichen verständigen) |
609 | D | Tabellenfeld & nicht im Dictionary (Bitte Verantwortlichen verständigen) |
610 | D | Fehler beim Lesen der Tabelle & aus dem Dictionary |
611 | D | Bitte mindestens & & auswählen |
612 | D | Bitte höchstens & & auswählen |
613 | D | Zeilenlänge wird überschritten (Bitte höchstens & & auswählen) |
614 | D | Verarbeitung nicht vorgesehen (Bitte Verantwortlichen verständigen) |
615 | D | Bitte mindestens & & markieren |
616 | D | Bitte höchstens & & markieren |
617 | D | Feldname hat mehr als zehn Stellen. Übernahme nicht möglich. |
618 | D | Es wurde bereits ein Feld mit gleichem Referenzfeld übernommen |
619 | D | Sie haben keine Berechtigung zum & |
620 | D | Bitte Cursor auf Feld oder Quelltabelle positionieren. |
621 | D | Zum Feld &-& sind keine Informationen vorhanden. |
622 | D | Zu den Feldern der Tabelle & sind keine Informationen vorhanden. |
623 | D | Verarbeitung Einheitenpflege abgebrochen |
624 | D | Einheit wird in Info-Struktur & verwendet, Löschen abgebrochen |
625 | D | Einheit & wurde erfolgreich angelegt |
626 | D | Einheit & wurde erfolgreich gelöscht |
627 | D | Keine Einheit gefunden, Verarbeitung Einheitenpflege abgebrochen |
628 | D | Der Primärschlüssel der DB-Tabelle & wurde nicht umgestellt! |
629 | D | Bei der Umstellung der Datenbanktabelle & traten Fehler auf! |
630 | D | Keine Extraktstruktur aktiv oder kein BW angeschlossen |
631 | D | Kombination Ereignis / Fortschreibungsgruppe (&/&) existiert nicht! |
632 | D | Zu viele Kommunikationsstukturen zum Zeitpunkt &1 (interner Fehler) |
633 | D | Detaillierter Neuaufbau paßt nicht mit Info-Struktur & zusammen |
634 | D | & ist keine gültige Fortschreibungsgruppe! |
635 | D | & ist kein gültiges Fortschreibungsereignis |
636 | D | Kennzahl &: Bitte Spaltenbreite zwischen & und & wählen |
637 | D | Bitte Buchungsdatum ausfüllen |
638 | D | Die Version enthält keine Daten |
639 | D | Datumsfelder der InfoStruktur S032 werden nicht aufgebaut |
640 | D | Zur Infostruktur & sind keine Standardanalysen vorgesehen |
641 | D | Es muß mindestens ein Merkmal vom Typ ' ' definiert sein! |
642 | D | Falsche Extraktor für BW-Transferstruktur & . |
643 | D | Report/Funktionsbaustein & ist obsolet. |
644 | D | & : Hierarchie der Kennzahl ist niedriger als die der Merkmale |
645 | D | Es sind Warnungen aufgetreten - bitte lesen Sie den Langtext! |
646 | D | & : Hierarchie des Datumsfeldes ist niedriger als die der Kennzahl |
647 | D | Formel und externes Programm können nicht gleichzeitig verwendet werden. |
648 | D | Formroutine und zugehöriges Programm sind immer zusammen anzugeben. |
649 | D | Inkonsistente Belegtabellen zu Beleg &1 (&2) |
650 | D | BW Transfer-Struktur &1 kann im Copy Management nicht bearbeitet werden. |
660 | D | Keine Daten zum Aufsetzen des Laufes vorhanden |
685 | D | & : Regel Kennzahl/Merkmal inkonsistent |
686 | D | Interner Fehler bei der Eingabeprüfung bzw. bei F4-Auswertung aufgetreten |
687 | D | Keine selbstdefinierte Einheit gefunden. Verarbeitung abgebrochen! |
688 | D | Fehler bei selbstdefinierten Einheiten! |
689 | D | Fehler bei der Archivierung von Selektionsversionen! |
690 | D | Selektionsversion & kann nicht zurückgeladen werden. (Fehler &) |
691 | D | Einstellungen für Ziel-Info-Struktur &1 geändert! --> Langtext |
692 | D | Geänderte Einstellungen in der Kennzahlbearbeitung! --> Langtext |
693 | D | Bei der Generierung der Info-Struktur &1 ist ein Fehler aufgetreten. |
694 | D | Die Info-Struktur & kann nicht gelöscht werden! |
696 | D | Tabellenname hat mehr als zehn Stellen. Übernahme nicht möglich. |
697 | D | Zugrundeliegende Kommunikationsstruktur kann nicht transportiert werden! |
698 | D | Kommunikationsstruktur & nach Anlegen des Ereignisses & geändert! |
699 | D | Sie haben keine Entwicklerberechtigung für die Bearbeitung von IDocs |
700 | D | *** 700 - 799 Pflege LIS-Eingangsschnittstelle *** |
701 | D | Ereignis & befindet sich im SAP-Namensraum! |
702 | D | LIS-Eingangsschnittstelle & wurde erfolgreich angelegt! & & |
703 | D | Funktionsbausteine zum Ereignis & sind nicht generiert! |
704 | D | Das Ereignis & gehört zu keiner generierten LIS-Eingangsschnittstelle! |
705 | D | LIS-Eingangsschnittstelle & wurde erfolgreich gelöscht! |
706 | D | Funktionsbausteine zum Ereignis & wurden angelegt! & & |
707 | D | Funktionsbausteine der LIS-Eingangsschnittstelle & wurden gelöscht! |
708 | D | Ereignis & ist nicht vorhanden! (Eingabe prüfen) |
709 | D | Es gab keine Änderungen! (Sichern und Generieren nicht erforderlich) |
710 | D | LIS-Eingangsschnittstelle & wurde erfolgreich geändert! & & |
711 | D | Ereignis & ist bereits vorhanden! (Eingabe prüfen) |
712 | D | Ereignis & wurde erfolgreich geändert! |
713 | D | Funktionsgruppe & zum Ereignis & entfernt! (TMC5) |
714 | D | Funktionsgruppe & wurde dem Ereignis & zugewiesen! (TMC5) |
715 | D | Tabelle &, Einträge & & & |
716 | D | Tabelle &, Einträge & & konnten nicht & werden! |
717 | D | Unterprogramm & wurde & ! |
718 | D | Unterprogramm & konnte nicht & werden! |
719 | D | Datenelement & für Referenzfeld & hat keine Einheit (TMC6) |
720 | D | DDIC-Struktur & für Einheitenermittlung nicht vorhanden! (TMC6) |
721 | D | Datenelement & aus DDIC-Struktur & existiert nicht (Einheitenermittlung) |
722 | D | Einheitenfeldname & aus DDIC-Struktur & ist nicht in Tabelle TMC6! |
723 | D | Ereignistext (TMC5T) für Sprache & und Ereignis & existiert bereits! |
724 | D | Zum Ereignis & existieren bereits Kommunikationsstrukturen (TMC20) |
725 | D | Kommunikationsstruktur & ist für Applikation & bereits angelegt! |
726 | D | Zum Ereignis & existiert die richtige Einheit & mit Hierarchie & (TMC24) |
727 | D | Ereignis & wird &! |
728 | D | Die abhängigen Tabelleneinträge werden &! |
729 | D | Ereignis & wurde erfolgreich gelöscht! |
730 | D | Kommunikationsstruktur & existiert nicht! (Eingabe prüfen) |
731 | D | Das Feld BUKRS (Buchungskreis) existiert in Ihrer Struktur nicht! |
732 | D | Das Feld SUPKZ existiert in Ihrer Struktur nicht! |
733 | D | Ihre Struktur hat kein Datumsfeld (Typ DATS)! |
734 | D | Beim Prüfen der Komm.struktur wurden Warnungen aufgezeichnet (Protokoll) |
735 | D | Anlegen des Ereignisses wurde erfolgreich abgeschlossen! |
736 | D | Alle Ereignisveränderungen wurden wegen Fehlern zurückgenommen! |
737 | D | Kundennamensraum für & ist erschöpft! |
738 | D | Abbruch wegen interner Fehler in Programm & ! |
739 | D | Mehrstufige Kommunikationsstrukturen werden derzeit nicht unterstützt! |
740 | D | Musterreport & existiert nicht! FBS-Generierung wurde abgebrochen! |
741 | D | Funktionsbaustein & konnte nicht gelöscht werden! |
742 | D | Funktionsgruppe & konnte nicht gelöscht werden! -> Grund: & |
743 | D | Funktionsbaustein & wurde gelöscht! |
744 | D | Funktionsgruppe & wurde gelöscht! |
745 | D | Funktionsbaustein & konnte nicht angelegt werden! -> Grund: & |
746 | D | Alle Systemveränderungen wurden zurückgenommen! |
747 | D | Einheit/Ereignis & & existiert bereits mit anderem Inhalt & &! (TMC24) |
748 | D | Für Feld & & wurde eine neue Einheit & hinzugefügt! (TMC6) |
749 | D | Das Objekt & ist von Benutzer & gesperrt! |
750 | D | Das Objekt & kann nicht gesperrt werden! Versuchen Sie es später erneut! |
751 | D | Ereignis & darf nicht gelöscht werden, es wird noch verwendet! |
752 | D | Info-Struktur &, Feld &, Fortschreibung & im Mandanten & vorhanden! |
753 | D | U. U. sind hier nicht alle betroffenen Programme aufgezeigt! |
754 | D | Generierung wurde wegen fehlender SAP-Basisapplikation abgebrochen! |
755 | D | Funktionscode & auf diesem Bild nicht unterstützt! (Eingabe ignoriert) |
756 | D | IDoc & wird gelesen und auf LIS-Belange geprüft! |
757 | D | IDoc-Segment & wird als Kommunikationsstruktur interpretiert! |
758 | D | IDoc & ist nicht vorhanden! (Eingabe prüfen) |
759 | D | Mehrstufige IDocs werden derzeit nicht unterstützt! |
760 | D | IDoc & hat kein Segment! (Pflegen Sie zuerst das IDoc nach.) |
761 | D | Die Funktionsgruppe darf keine Leerzeichen enthalten! |
762 | D | Ihrer Auswahl entsprechend wurde kein IDoc-Port angelegt! |
763 | D | Zur Struktur & wurden keine Eingangsschnittstellen gefunden! |
764 | D | Zur Struktur & wurden mehrere Eingangsschnittstellen gefunden! |
765 | D | IDoc enthält keine Daten! (Verarbeitung wurde abgebrochen.) |
766 | D | Sie haben keine Pflegeberechtigung für die LIS-Eingangsschnittstelle! |
767 | D | Im IDoc & wird nicht das LIS-Basis-IDoc 'LIS_EXTR' verwendet! |
768 | D | LIS-Eingangsschnittstelle wurde nicht generiert (Benutzereingabe)! |
769 | D | Die IDoc-Eingangsbeschreibungen werden angelegt! |
770 | D | Die IDoc-Eingangsbeschreibungen wurden erfolgreich angelegt! |
771 | D | Für dieses Feld gibt es noch keine Werte! |
772 | D | Sie haben die Transportpflege abgebrochen, bzw. es gab Transportprobleme! |
773 | D | Zum Ereignis & gibt es den Eingangsfunktionsbaustein & |
774 | D | Zum Ereignis & konnte kein Eingangsfunktionsbaustein ermittelt werden! |
775 | D | Die IDoc-Eingangsbeschreibung ist bereits vorhanden! |
776 | D | Wert & für Feld & existiert in Tabelle & nicht! |
777 | D | Kommunikationsstruktur & ist fehlerhaft! (Grund: & ) |
778 | D | Einheit & darf wegen Verwendung im Ereignis & nicht gelöscht werden! |
779 | D | Die LIS-Eingangsschnittstelle & ist inkonsistent! |
780 | D | Report & mit den Ergänzungsstrukturen für Formeln und Bedingungen fehlt! |
781 | D | Kommunikationsstruktur & ist bereits in INCLUDE & vorhanden! |
782 | D | Strukturdefinitionen für Formeln und Bedingungen (Applikation &) & ! |
783 | D | Fehlerhafte Generierung des Programms & |
784 | D | Keine Informationsstruktur mit aktiver Fortschreibung vorhanden! |
785 | D | Ereignis & kann für die IDoc-Schnittstelle nicht verwendet werden! |
786 | D | Unerlaubte Kombination von Referenztabelle und Referenzfeld! |
787 | D | Kommunikationsstruktur & enthält kein Feld vom Typ & ! |
788 | D | Kommunikationsstruktur & ist unvollständig und nicht aktiv! |
789 | D | Fehlerhafte Generierung des Programms & |
790 | D | Funktionsgruppe & ist bereits vorhanden! |
791 | D | Vorlageprogramm & wurde nicht gefunden |
792 | D | Fehlende Parameterübergabe im Funktionsbaustein & |
793 | D | Segmenttyp & existiert als Dictionary-Objekt. |
794 | D | Beim Anlegen der Kommunikationsstruktur & gab es Fehler |
795 | D | Beim Anlegen des IDoc-Segmentes & gab es Fehler |
796 | D | Beim Anlegen des IDocTyp & gab es Fehler |
797 | D | Die Kommunikationsstruktur & enthält kein Feld & ! |
798 | D | Die Segmentdefinition des Segmenttyps & enthält kein Feld & ! |
799 | D | Fehler beim Check Kommunikationsstruktur und Segmentdefinition |
800 | D | **************** Fortschreibung Statistik RV |
801 | D | Fehler Ermitteln Zielwährung: Verkaufsorg & Buchungskreis & |
802 | D | Fehler Ermitteln Hauswährung: Kurstyp 'M' Datum & von & nach & RC & |
803 | D | Fehler Mengenumrechnung: BelegME & Zähler & Nenner & RC & |
804 | D | Fehler NAMETAB_GET: Struktur & RC & |
805 | D | Statistikfortschreibung: Kein Eintrag in Tabelle VSFK & |
806 | D | Statistikfortschreibung: Kein Eintrag in Tabelle VSFP & |
807 | D | Kein Protokoll zum Benutzer & vorhanden |
808 | D | Buchungskreis & zur VerkOrganisation & nicht vorhanden (Beleg &) |
809 | D | VerkOrganisation & ist nicht vorhanden (Beleg &) |
810 | D | Fehler Ermitteln Kurs: Fremdwährung & Hauswährung & Datum & (Beleg &) |
811 | D | Fehler Mengenumrechnung: Mengeneinheit & Zähler & Nenner & (Beleg &) |
812 | D | Fehler nach Aufruf 'Ermitteln offene Mengen Einteilungen' für Beleg & & |
813 | D | Fehler beim Aktualisieren offenen Mengen der Einteilung & |
814 | D | Programmfehler beim Lesen XVBUK/XVBRK & im LMCS5U04/LMCS6U04 |
815 | D | Fehler in der Ermittlung der Hauswährung: Kurstyp & Datum & von & nach & |
830 | D | ***** 830-840 vorläufig reserviert für Allgemeine Hierarchie ************ |
831 | D | Die Hierarchie ist fehlerhaft |
832 | D | An Merkmalswerte können keine weiteren Merkmalswerte angehängt werden |
833 | D | Keine Textermittlung möglich, da von anderen Feldern abhängig |
850 | D | * 850-889 vorläufig reserviert für OIW: InfoKatalog und BAPIs ** |
851 | D | OIW-Info-Katalog noch nicht vorhanden |
852 | D | OIW-Info-Katalog bereits vorhanden |
853 | D | Standard-OIW-Info-Katalog im Kundensystem nicht pflegbar |
854 | D | Der OIW-Info-Katalog ist inkonsistent |
855 | D | Ändern nur in Originalsprache möglich |
856 | D | Der OIW-Info-Katalog ist im Moment gesperrt durch Benutzer & |
857 | D | An Info-Objekte können keine weiteren Info-Objekte angehängt werden |
858 | D | Der Standard-OIW-Info-Katalog wurde erfolgreich übernommen |
859 | D | Der OIW-Info-Katalog ist fehlerhaft |
860 | D | Nur Anzeige möglich, da die Berechtigung zum Pflegen fehlt |
861 | D | OIW-Info-Katalog nicht vorhanden, keine Berechtigung zum Pflegen |
862 | D | Keine Berechtigung zum Anzeigen bzw. Pflegen des OIW-Info-Kataloges |
863 | D | OIW-Metadaten wurden gelöscht |
864 | D | Fehlende Texte aus Originalsprache ergänzt |
870 | D | Daten wurden gelesen |
871 | D | Die übergebene Datenquelle zum OIW ist nicht vorgesehen |
872 | D | Das Info-Objekt & aus Tabelle & ist nicht vorgesehen |
873 | D | Eine gemeinsame Datenquelle zu den Info-Objekten ist nicht vorgesehen |
874 | D | Übergeben Sie Info-Objekte in Tabelle COLUMNS_TO_READ |
875 | D | Info-Objekt & kann durch übergebene Datenquelle nicht ermittelt werden |
876 | D | Zu den Selektionsbedingungen wurden keine Daten gefunden |
877 | D | Die Ausprägung & ist für Feld SELECTION-SIGN nicht vorgesehen |
878 | D | Die Ausprägung & ist für Feld SELECTION-OPTION nicht vorgesehen |
879 | D | Info-Objekt/Datenquelle &/& nicht zur Selektion vorgesehen |
880 | D | Für Info-Objekt/Datenquelle &/& ist nur ein Parameter vorgesehen |
881 | D | OIW-Metadaten sind nicht gepflegt |
882 | D | OIW-Metadaten wurden gelesen |
883 | D | Keine Metadaten zu Info-Objekten des OIW-Info-Kataloges gepflegt |
884 | D | Keine Berechtigung zum Anzeigen des OIW-Info-Kataloges |
890 | D | Der Kapazitätsbedarf für Auftrag &, Vorgang & wurde reduziert |
891 | D | Kennzeichen Kosten stimmt mit Fortschreibungsaktivierung nicht überein |
892 | D | Verwendete Liegezeit gelöscht |
893 | D | Performance-Einstellungen im Moment durch Benutzer & gesperrt |
894 | D | Kennzeichen Warenausgang stimmt mit Fortschreibungsaktiv. nicht überein |
895 | D | Fortschreibungsgruppe zur Vorlage & muß angegeben werden |
896 | D | Die Einheit hat nicht die Dimension Zeit |
897 | D | Kennzeichen Vorgang stimmt mit Fortschreibungsaktivierung nicht überein |
898 | D | Einheit Durchführungszeit (exakt) gelöscht |
899 | D | Durchführungszeit/Durchlaufzeit ohne Einheit |
000 | E | Please enter the production line |
001 | E | Info structure & already exists (e.g. in client &) |
002 | E | Info structure & does not exist |
003 | E | No update rules exist for & & |
004 | E | Update rules saved for & & without checks |
005 | E | Error at & updating info structure & |
006 | E | Info structure & generated |
007 | E | Info structure & deleted |
008 | E | Source table & not allowed for application & |
009 | E | Field &-& not defined in Data Dictionary |
010 | E | Physical table & already exists |
011 | E | Period unit not maintained for info structure & |
012 | E | Error determining posting period (info structure &, variant &, RC &) |
013 | E | Reference & & does not exist |
014 | E | Default update rules copied from info structure & |
015 | E | Check update rules for & |
016 | E | Processing not possible (contact your systems administrator) |
017 | E | Choose one catalog category only |
018 | E | Choose a catalog category |
019 | E | Field catalog does not exist |
020 | E | Field catalog already exists |
021 | E | Fiscal year variant not maintained for company code & |
022 | E | Error & updating info structure & |
023 | E | Table pool not in DDIC or not active |
024 | E | Position the cursor on one of the lists |
025 | E | Table TFCS contains no valid structures for application & |
026 | E | Field catalog deleted |
027 | E | Field catalog saved |
028 | E | Processing not possible (contact your systems administrator) |
029 | E | & is not a field in table & |
030 | E | Reference fields must be different for each pair |
031 | E | Internal error checking Dictionary (program terminated) |
032 | E | Maintain all units for statistics updating |
033 | E | Info structure not yet saved (deletion unnecessary) |
034 | E | Error occurred while deleting information structure |
035 | E | Error saving info structure |
036 | E | Info structure saved |
037 | E | Choose at least one key figure |
038 | E | Overflow: table TMC1 |
039 | E | Table TMC1 locked, try again later |
040 | E | Error deleting table entry |
041 | E | Error reading table |
042 | E | Requested object currently locked. Only display possible |
043 | E | Processing not possible (contact your systems administrator) |
044 | E | Info structure & not yet created |
045 | E | No info structure for reference exists |
046 | E | Info structure & not created for application & |
047 | E | Name falls within SAP name range (S000 - S499) |
048 | E | Info structure cannot be changed |
049 | E | Error reading info structure & from table & |
050 | E | Processing not possible (contact your systems administrator) |
051 | E | Processing not possible (contact your systems administrator) |
052 | E | Not possible to generate evaluation structure |
053 | E | Requested object not found |
054 | E | Error assigning screen numbers (are all numbers already assigned?) |
055 | E | Error saving info structure |
056 | E | Update rules for & & already exist |
057 | E | Error reading program & |
058 | E | Table & contains no entry with key & |
059 | E | Error writing subroutine pool & |
060 | E | Subroutine pool & created |
061 | E | Error generating program & |
062 | E | One of the requested objects is locked (try again later) |
063 | E | Evaluation structure & generated |
064 | E | Evaluation structure will now be generated |
065 | E | System has started generation of program & |
066 | E | Error generating screens |
067 | E | Screens successfully generated |
068 | E | Planning screens will be generated now |
069 | E | Info structure & generated |
070 | E | Error reading Include & |
071 | E | Choose at least one characteristic |
072 | E | Evaluation structure & deleted |
073 | E | Processing not possible (contact your systems administrator) |
074 | E | You have given the same name to too many fields |
075 | E | Table & contains no entry for key & |
076 | E | Position cursor on one of the fields |
077 | E | All possible key figures used |
078 | E | & & & & |
079 | E | Error assigning numbers to key figures (is number range full?) |
080 | E | Transfer report now generated |
081 | E | Error reading report & |
082 | E | Start of generation of general access routines |
083 | E | Maintenance of SAP info structure & not allowed |
084 | E | This function is not allowed in Display mode |
085 | E | Error assigning numbers to screens |
086 | E | Requested object currently locked, try again later |
087 | E | Internal error in locking system, try again later |
088 | E | Error creating program & |
089 | E | Program & successfully generated |
090 | E | Info structure & deleted |
091 | E | Not possible to change info structure |
092 | E | SAP info structure & cannot be generated |
093 | E | Customer info structure & cannot be generated by SAP user |
094 | E | Update group & for info structure & not transported |
095 | E | Table specified for date contains no date fields |
096 | E | Update definitions exist for info structure & |
097 | E | Table & not a valid source table |
098 | E | General planning module pool will be adapted |
099 | E | Enter period in the format YYYY/__ |
100 | E | Enter period in the format __.YYYY |
101 | E | Enter period in the format __/YYYY |
102 | E | Enter period in the format __-YYYY |
103 | E | Enter period in the format YYYY.__ |
104 | E | Date format in user master record cannot be interpreted |
105 | E | Year entry greater than 2500 (please check) |
106 | E | Program name lies within name range reserved for LIS |
107 | E | Screen number lies within name range reserved for LIS |
108 | E | Entry missing in table TMC6 for unit & |
109 | E | Unit & not possible for key figure & |
110 | E | Do you want to assign a fiscal year variant to the info structure? |
111 | E | Planning coding not generated (no model report in table TMCZ) |
112 | E | Planning screens not generated (no model report in table TMCZ) |
113 | E | Maint. of customer info structures with parameter MCS - 'X' not allowed |
114 | E | Client &: no entry in table T730 for key figure ID & |
115 | E | Settings for client & updated |
116 | E | Error reading table & from Data Dictionary |
117 | E | Table does not exist or is not active in Data Dictionary |
118 | E | Enter reference field and table |
119 | E | Field catalog lies in SAP name range |
120 | E | Catalog lies in customer name range (no transport) |
121 | E | Info structure generation currently not possible |
122 | E | Internal error in lock management |
123 | E | You are not authorized to perform this activity |
124 | E | You are not authorized to use this application |
125 | E | Info structure contains data, and may not be deleted or changed |
126 | E | Planning data exists - this data will be deleted |
127 | E | Deletion of info structures currently not possible |
128 | E | Another user is creating this field catalog |
129 | E | Update definitions exist for info structure & |
130 | E | Check consistency of info structure definition and generated structure |
131 | E | Characteristic & in IS definition, but not in generated structure |
132 | E | Characteristic & in generated structure, but not in IS definition |
133 | E | Key figure & in IS definition, but not in generated structure |
134 | E | Key figure & in generated structure, but not in IS definition |
135 | E | Field & has different Dtel. in IS definition than in generated structure |
136 | E | Field & has different domain in IS definition than in generated structure |
137 | E | Units of IS definition and gen. structure do not match in field & |
138 | E | Info structure & not yet saved |
139 | E | Info structure & not yet generated |
140 | E | No major differences between info structure def. and generated structure |
141 | E | Different characteristic sequence in definition and generated structure |
142 | E | Different key figure sequence in definition and generated structure |
143 | E | No selection version stored for user & |
144 | E | Processing not possible (contact your systems administrator) |
145 | E | No analyses found |
146 | E | Drill-down to characteristic & already performed |
147 | E | Position cursor on a characteristic |
148 | E | Start of standard analysis generation |
149 | E | Generation of standard analyses completed |
150 | E | Check the reference fields of the information structure fields |
151 | E | Total length of chosen fields exceeds length provided |
152 | E | No updating of info structure & update group & |
153 | E | No log found |
154 | E | Start of initial screen generation |
155 | E | Start of include screen generation |
156 | E | Info structure & deleted |
157 | E | Date: &, time: &, generated by: &, client & |
158 | E | You are not authorized to create field catalogs for application & |
159 | E | You are not authorized to change field catalogs for application & |
160 | E | You are not authorized to display field catalogs for application & |
161 | E | You are not authorized to create this information structure |
162 | E | You are not authorized to change this information structure |
163 | E | You are not authorized to display this information structure |
164 | E | You are not authorized to generate information structures |
165 | E | Start of initial screen generation for proportional factors maintenance |
166 | E | Requested object currently locked, try again later |
167 | E | Maintain entries for units in table T445E |
168 | E | Update setting for info structure & copied |
169 | E | You are not authorized to delete selection version &. |
170 | E | Analyses of SAP info structures can only be called using the menu |
171 | E | Warning: MCS parameter has been set |
172 | E | No error found when checking info structure |
173 | E | Error copying/deleting versions of info structure & |
174 | E | Maintenance version exists for info structure & |
175 | E | Screen generation currently locked |
176 | E | Info structure already saved but not generated |
177 | E | Doc.type & of order & not statistically relevant |
178 | E | Item category & of item & not statistically relevant |
179 | E | Stats. group for sold-to party &: & |
180 | E | Update group header: & |
181 | E | Sales organization: &, distribution channel: &, division: & |
182 | E | Statistics group for doc.type &: & |
183 | E | Statistics group for item category &: & |
184 | E | Statistics group for material &: & |
185 | E | Update group for item &: & |
186 | E | Update group for document header |
187 | E | Update groups for document items |
188 | E | Delivery has no order document |
189 | E | Delivery note type & is not statistically relevant |
190 | E | Update group copied from order & |
191 | E | Document & not found |
192 | E | Update group copied from document &, item & |
193 | E | Item & not found for document & |
194 | E | Item & of delivery note not related to any order |
195 | E | Billing type & is statistically relevant |
196 | E | Billing type & is not statistically relevant |
197 | E | Update group copied from delivery note & |
198 | E | Preceding document & not found |
199 | E | Billing document has no item with preceding document |
200 | E | * 200 - 299 reserved for batch setup + archiving of statistics * |
201 | E | Data not updated from order & |
202 | E | Faulty order... |
203 | E | Faulty order... |
204 | E | Faulty order... |
205 | E | Faulty document |
206 | E | Data from delivery & not updated |
207 | E | Faulty delivery |
208 | E | Faulty delivery |
209 | E | Data from order/delivery & not in table MCVSRFK |
210 | E | Data from billing document & was not updated |
211 | E | Statistically relevant data from order & item & not in table MCVSRFP |
212 | E | Order &: Error determining statistics specifications (no updating) |
213 | E | Vendor &: error determining stats. currency rate (no updating) |
214 | E | Billing document &: error determining stats. currency rate (no updating) |
215 | E | End comes before reference time |
216 | E | End lies too far into the future |
217 | E | End time comes before the start time |
218 | E | Current data may not be deleted |
219 | E | You are not authorized to set up info structure &. |
220 | E | You are not authorized to set up sales info structures |
221 | E | You are writing in the actual data |
222 | E | More faulty documents found than the tolerated & |
223 | E | Incorrect delivery note |
224 | E | Incorrect delivery note |
225 | E | Incorrect billing document |
226 | E | Use version that begins with '&(' |
227 | E | Program terminated, time limit exceeded: & document item(s) updated |
228 | E | Start of order processing |
229 | E | Start of delivery note processing |
230 | E | Start of billing document processing |
231 | E | Current version may not be deleted |
232 | E | Incorrect delivery note |
233 | E | Without info structure restrictions, the run time can be very high |
234 | E | Start of material documents processing |
235 | E | You are not authorized to set up INVCO information structures |
236 | E | & document item(s) updated |
237 | E | It is not possible to read archive & |
238 | E | No info structure exists in this client for DB table & |
239 | E | Table & - archiving object & created |
240 | E | Field & cannot be used without (a) dimension(s) |
241 | E | Time of termination lies in the past |
242 | E | Structure & is an evaluation structure (function not possible) |
243 | E | Info structure not yet generated |
244 | E | Error occurred during generation of programs |
245 | E | You are not authorized to archive statistical data |
246 | E | Creation of info structures with names from S000 to S500 not allowed |
247 | E | Method & not defined for source info structure & |
248 | E | Method & not defined for target info structure & |
249 | E | Structure & is an evaluation structure |
250 | E | The correction system does not allow the creation of field catalogs |
251 | E | Error generating archiving object & |
252 | E | Correction system allows display only, not maintenance, in this client |
253 | E | Client & already contains info structure & |
254 | E | Renaming of evaluation structures not allowed |
255 | E | Table & contains & converted entries |
256 | E | Table & contains & entries for info structure & |
257 | E | Tables for planning tools |
258 | E | Tables for statistics updating |
259 | E | Regeneration of update programs |
260 | E | Tables for standard analyses |
261 | E | Info structure header |
262 | E | Variant & for program & does not yet exist |
263 | E | Error generating job |
264 | E | Correction rules allow display only, not maintenance, in this system |
265 | E | Error generating temporary program |
266 | E | Info structure & is an internal info structure |
267 | E | Error generating standard analysis |
268 | E | Maintain the print parameters |
269 | E | Maintain the start date |
270 | E | Enter a variant |
271 | E | Enter a user name |
272 | E | You are not authorized to change version & |
273 | E | Incomplete background jobs exist for this info structure |
274 | E | Document & is not in the system |
275 | E | Choose a four-character name between S501 and S999 |
276 | E | Choose another name for the info structure - this one already being used. |
277 | E | You are not authorized to analyze info structure & |
278 | E | Info structure locked for user & (request/task &) |
279 | E | Updating cannot be transported into another system |
280 | E | Authorization check: Scope of selection '&3' was restricted |
281 | E | Methods maintenance is currently blocked by user & |
282 | E | The billing document was recorded with the billing document interface |
283 | E | Item & refers to a delivery without order reference |
284 | E | The delivery & was not found |
285 | E | Underlying delivery & has dummy order type & |
286 | E | Determining the updating group to position & |
287 | E | No update occurs |
288 | E | Statistics group to delivery type &: & |
289 | E | Update group to document & could not be determined |
290 | E | Update group to document & pos. & could not be determined |
291 | E | Not all documents could be blocked |
292 | E | System error: Blocking the documents |
293 | E | You do not have any authorization to execute the report RMCSCLCC |
294 | E | The reference field &-& cannot be used |
295 | E | The source field &-& cannot be used |
296 | E | The units from the source and reference fields are not compatible |
297 | E | The update group is copied from the first item |
298 | E | Info structure & does not have a period unit (functionality limited) |
299 | E | Info structure & cannot be used as a target info structure. |
300 | E | Manually define the period to analyze for the analysis you have called up |
301 | E | Update group copied from delivery note &, item & |
302 | E | Update program for info structure &: & |
303 | E | ***** Formula, requirement or external routine used... |
304 | E | Info structure &: updating activated |
305 | E | Info structure &: updating not activated |
306 | E | Info structure with update rules |
307 | E | * Key figure & in info structure &: |
308 | E | ***** Update group: &, hierarchy: &, routine: & |
309 | E | * Several key figures in info structure &: |
310 | E | ***** No formula, requirement or external routine used |
311 | E | No entry in table MCAKVER for reference report |
312 | E | Warning: Unit & requires special characteristics |
313 | E | Warnings issued |
314 | E | Warning: inconsistencies may occur when units updated -> please check |
315 | E | Internal problem in TADIR interface, return code - & |
316 | E | No archive selected |
317 | E | Method & for usage & does not exist |
318 | E | The method cannot be used for this source IS and target IS |
319 | E | & records converted |
320 | E | & data records were not copied/converted |
321 | E | New job scheduled |
322 | E | Prgram errors in LMCS1U03: Application dates & do not correspond to SIS |
323 | E | The info structure includes data in other clients |
324 | E | No logs were found |
325 | E | Info structure & cannot be used as a reference |
326 | E | Please use a method or different versions |
327 | E | The summation indicator cannot be set for & |
328 | E | The end of the list was reached |
329 | E | The beginning of the list was reached. |
330 | E | Please position the cursor on a scenario title |
331 | E | With data collection via user-exit no change in source data is possible |
332 | E | Copying is only possible within an application |
333 | E | The name of an evaluation structure cannot contain special characters |
334 | E | The job was scheduled but not released. |
335 | E | An error occured in the job scheduling - see overview. |
336 | E | Data already exists in the version |
337 | E | Not possible to process the structure(s) with the program! |
338 | E | Booking terminated! Error inserting in the target table |
339 | E | Data target and source are idential: Changing source data unnecessary |
340 | E | Data target and source are identical: Deleting source data impossible |
341 | E | Information structure & is not of the type 'standard' |
342 | E | Information structure & is not of the type 'Without period' |
343 | E | Info structure & may not be used as a target info structure |
344 | E | Structure & cannot be processed in Copy Management |
345 | E | A data record was not processed |
346 | E | Selected data from info structure &, version & was deleted |
347 | E | No reference exists for the selected scenario |
348 | E | Data target and source must be identical |
349 | E | Info structure & cannot be selected |
350 | E | Errors in the automatic read logic definition |
351 | E | Maintenance of the automatic enhancement is blocked by & |
352 | E | Please specify read table for F4 help or read field check! |
353 | E | Specified source table is not a valid database table. |
354 | E | Specification of target info structure missing! No check or F4 possible! |
355 | E | Please specify target field for F4 Help and read table check! |
356 | E | Target field & is not a valid field from target information structure &! |
357 | E | Specifications to source info structure missing! No check or F4 possible! |
358 | E | Field & is not in table &! For valid entries use F4! |
359 | E | Field & is not a calculable key figure in &! For valid entries use F4! |
360 | E | & is neither a field from table & nor a valid number value! |
361 | E | Automatic enhancement not possible for this combination! See long text! |
362 | E | The field & is not a valid target field for &! For valid entries use F4! |
363 | E | Table & cannot be used in automatic import to info structure &! |
364 | E | The field & cannot be used as an import field from &! See F4! |
365 | E | The field & is not included in import table &! Use F4 Help! |
366 | E | Please complete the entries for this data record! |
367 | E | Determine text only for valid class type and material number |
368 | E | CAUTION! Division by & not permitted! Please redefine step! |
369 | E | Generated object! Please use info structure maintenance (MC22). |
370 | E | It is not possible to generate the LIS interface |
371 | E | Please specify a target version |
372 | E | Not possible to copy to the source version |
373 | E | Not possible to delete target version |
374 | E | The source table of the rerun does not correspond with the old table |
375 | E | The lines you selected contain incorrect import rules! See long text! |
376 | E | This program cannot be used to edit structure & |
377 | E | The user parameter MCS is ignored in the customer system |
378 | E | The functional enhancement is not yet assigned to an active project |
379 | E | Different period units in actual and planning versions - copy impossible |
380 | E | Not possible to set up the secondary index & (&) |
381 | E | Problems occurred during setup of table & |
382 | E | You have reached the end of the stock value list |
383 | E | The key figure you have chosen is not a stock value |
384 | E | You have reached the start of the stock value list |
385 | E | No update program exists for information structure & |
386 | E | Units for stock value and receipts/issues field do not agree |
387 | E | A key figure without a summation indicator cannot be used as stock value |
388 | E | The assigned stock value information will be deleted |
389 | E | No receipts/issues fields are assigned to the stock value & |
390 | E | Update regeneration blocked for: & & & |
391 | E | Update was successfully generated for & & & |
392 | E | Error while checking the update of & & & |
393 | E | Error while generating the update of & & & |
394 | E | Regeneration is unnecessary as there is no self-defined update |
395 | E | Regeneration of update begun: & & & |
396 | E | No update definition exists: & & & |
397 | E | Stock value &: the maintained receipts/issues field does not exist in & |
398 | E | In field &, the units between & and & are not compatible |
399 | E | Characteristics in info structure & do not correspond with & / & |
400 | E | **** 400 - 499 reserved for updating generation ***** |
401 | E | No characteristic update rules exist for reference & & |
402 | E | Name range reserved for LIS updating generation |
403 | E | Generating control tables for updating |
404 | E | Generating updating for & & |
405 | E | Checking of data relevant to updating |
406 | E | Error reading reference report & |
407 | E | Reading of update rules for & & |
408 | E | Error reading table & |
409 | E | Key figure update rules have been read |
410 | E | No key figure update rules exist |
411 | E | Object update rules read |
412 | E | No characteristic update rules exist |
413 | E | General information on info structure & read |
414 | E | No general information on info structure & exists (TMC4) |
415 | E | Checking update rules for & & |
416 | E | No USING parameters maintained for event & in table TMC20 |
417 | E | Error reading NAMETAB info for table & |
418 | E | No conversion routine from & to & maintained in TMC6U |
419 | E | No statistics hierarchy for source table & maintained in TFCS |
420 | E | No USING parameters maintained for unit conversion routine in TMC23 |
421 | E | No source field maintained for unit & and event & in TMC24 |
422 | E | Error generating TMC2S |
423 | E | Error generating TMC2F |
424 | E | & : Update type missing |
425 | E | & : Event missing |
426 | E | & : Key figure unit missing |
427 | E | & : Source field missing |
428 | E | & : either source field or counter |
429 | E | & : Source unit missing |
430 | E | & : Date field missing |
431 | E | & : Program name or subroutine missing |
432 | E | & : characteristic - source field or formula missing |
433 | E | & : Characteristic : Length of offset missing |
434 | E | & : characteristic - offset missing |
435 | E | No generation (error checking updating of & &) |
436 | E | Only source fields from MC communications structures allowed |
437 | E | No error checking updating |
438 | E | Position cursor on key figure |
439 | E | Error at INSERT in table & |
440 | E | Generation currently locked by another transaction or user |
441 | E | No authorization to maintain updating of & & |
442 | E | No authorization to generate/delete info structure/updating |
443 | E | Maintenance of SAP standard updates not allowed |
444 | E | Delete updating of & & |
445 | E | Update program & deleted |
446 | E | Update program does not yet exist |
447 | E | Update routines call deleted (TMC2F) |
448 | E | No update routines exist as yet in TMC2F |
449 | E | Key figure update rules have been deleted |
450 | E | Characteristic update rules deleted |
451 | E | Program reference for update program deleted in & |
452 | E | No program reference exists in & |
453 | E | & & not in list of info structures to be updated |
454 | E | & & deleted from list of info structures to be updated |
455 | E | Hierarchy & for event & in application & is not allowed |
456 | E | Conversion from source unit & to unit & not allowed |
457 | E | Application-specific generation information was read |
458 | E | No generation information found for application & |
459 | E | Internal error copying key figure & |
460 | E | Info structure & not active (no updating after generation) |
461 | E | Internal error reading data in info structure & |
462 | E | No texts exist for fields in info structure & |
463 | E | No fields exist for info structure/DDIC structure & / & |
464 | E | DDIC structure & for info structure & not active in Data Dictionary |
465 | E | No allocation of formula/requirement group to application & in TMC21 |
466 | E | Formula & does not exist |
467 | E | Formula & not active |
468 | E | Requirement & does not exist |
469 | E | Requirement & not active |
470 | E | & : program & does not exist for external routine |
471 | E | & : formula & does not exist |
472 | E | & : Formula & not active |
473 | E | & : requirement & does not exist |
474 | E | & :requirement & not active |
475 | E | & : characteristic - source table & for event & does not exist |
476 | E | & : source table & for event & does not exist |
477 | E | & : source table & for date for event & does not exist |
478 | E | & : hierarchy not maintained |
479 | E | & : hierarchy only if source field not specified |
480 | E | &: Conversion of source unit & to unit & not allowed |
481 | E | & : Key figure already used with other update type & |
482 | E | First define the event to be updated |
483 | E | First specify a source table/date table |
484 | E | No reference to maintenance transaction in TMCTC |
485 | E | Event & not allowed for application & |
486 | E | No authorization to maintain formulas/requirements for application & |
487 | E | & : characteristic - specify either formula or source field |
488 | E | &: characteristic - hierarchy not maintained |
489 | E | & : Characteristic : hierarchy only necessary with formula |
490 | E | & : FORM routine for formula/requirement & does not exist |
491 | E | & : characteristic - FORM routine for formula/reqmt. & does not exist |
492 | E | FORM routine for formula/requirement & does not exist |
493 | E | No update rules exist for key figures with reference & |
494 | E | No revised version exists - restoring not necessary |
495 | E | No update definitions exist |
496 | E | Generation status in client & inserted for & & |
497 | E | Generated version was recovered |
498 | E | &: only update type 'data transport' allowed for character key figures |
499 | E | & & & & |
500 | E | Update type does not fit to the source field type |
501 | E | Not possible to determine suggested values |
502 | E | & : Key figure hierarchy is higher than the characteristics |
503 | E | Internal error |
504 | E | Error when reading the internal table & |
505 | E | & : Please check whether entering a hierarchy is necessary |
506 | E | No event exists for source info structure |
507 | E | The data transfer to the LIS engine is not possible |
508 | E | Evaluation structure &1 does not exist in application &2 (&3). |
509 | E | Analysis & already exists (please check entry) |
510 | E | Analysis & does not exist (please check entry) |
511 | E | Reference analysis & does not exist (please check entry) |
512 | E | Analysis & will be deleted |
513 | E | Define characteristics |
514 | E | Define key figures |
515 | E | Evaluation structure & aleady exists in table T804A. |
516 | E | No suitable source fields available for target field |
517 | E | Info structure & is connected to other info structures |
518 | E | Info structure & does not contain any stock values |
519 | E | Movement structure & does not correspond with reference structure & |
520 | E | Evaluation & saved |
521 | E | Evaluation & generated |
522 | E | Evaluation & generated with warning |
523 | E | Evaluation & could not be generated |
524 | E | Info structure type '&' is not permitted in application & |
525 | E | No free evaluation number in library & |
526 | E | Prefix for evaluation number not maintained in library & |
527 | E | No layout report exists for this evaluation structure |
528 | E | Layout control not possible (too many key figures selected) |
529 | E | No standard set maintained for characteristic & |
530 | E | Enter column repetitions between 2 and & |
531 | E | Number of column repetitions ignored for this type |
532 | E | Default value for number of columns is & |
533 | E | No key figure exists (choose key figures first) |
534 | E | Maximum formula length has been reached |
535 | E | Key figure is not a formula (position cursor on formula) |
536 | E | & |
537 | E | Processing not defined (contact your systems administrator) |
538 | E | Evaluation structure & generated |
539 | E | Number range for evaluation structure library is exhausted |
540 | E | Number range for evaluation structure sets is exhausted |
541 | E | Number range for jobs has been exhausted |
542 | E | Set & exists already |
543 | E | Variable & exists already |
544 | E | Report & exists already |
545 | E | Library does not exist for eval. structure & (please check entry) |
546 | E | Evaluation structure & exists already (please check entry) |
547 | E | Set for field & cannot be deleted (still needed) |
548 | E | Variable for field & cannot be deleted (still needed) |
549 | E | SetVar for field & cannot be deleted (still needed) |
550 | E | Evaluation structure & deleted |
551 | E | Evaluation structure & cannot be deleted (still needed) |
552 | E | Number assignment for library blocked by user & |
553 | E | Number assignment for sets blocked by user & |
554 | E | Number assignment for jobs blocked by user & |
555 | E | Evaluation structure & unchanged (not generated) |
556 | E | No authorization for DD structure & |
557 | E | No authorization for evaluation structure & |
558 | E | Change eval. structure: only with ref. to DD structure & |
559 | E | Evaluation structure & in SAP name range |
560 | E | Analysis & in SAP name range |
561 | E | Evaluation structure & blocked by user & |
562 | E | Evaluation & blocked by user & |
563 | E | No authorization to run evaluation & |
564 | E | Command file & does not exist |
565 | E | Layout report & does not exist for library 3AA |
566 | E | Info structure for evaluation structure & was changed |
567 | E | Info structure for evaluation structure & was deleted |
568 | E | Evaluation structure for info structure & not yet generated |
569 | E | Select processing session |
570 | E | Caution: Evaluation structure &1 exists in more than one client! |
571 | E | Error reading a formula |
572 | E | Functions for editing info structure & are restricted |
573 | E | Source info structure & does not have a period unit! |
574 | E | Target info structure & does not have the same type as source structure & |
575 | E | Updating not possible for info structure & |
576 | E | Type of info structure & was changed in client & (TMC4) |
577 | E | Type of info structure & remains unchanged in client & (TMC4) |
578 | E | Client &: & / & in IS & adapted for updating (TMC2F) |
579 | E | Client &: Problem adapting & / & to updating IS & (TMC2F) |
580 | E | Connection to the transport group only possible in the customer system. |
581 | E | The name of a new evaluation structure must begin with 'ZF'. |
582 | E | Client &: Updating for & / & adpated for IS & (TMC2S) |
583 | E | Client &: no adjustment of & / & to IS & (TMC2S) |
584 | E | Key figure & exists in info structure &, but not in info structure & |
585 | E | Start processing transport documents |
586 | E | Archived documents cannot be processed at present |
587 | E | Incorrect shipment document, shipment type &, service agent &, TPP & |
588 | E | Data from transport document & was not updated |
589 | E | The type you have chosen is not permitted for application & |
590 | E | Maximum no. of segments must be larger than the minimum |
591 | E | Object & was generated |
592 | E | Enter & |
593 | E | Updating generation locked |
594 | E | Planning not possible for an info structure of this type |
595 | E | Regeneration of updating complete: & & & |
596 | E | Processing of info structure & not possible |
597 | E | 1st characteristic: there is no document number |
598 | E | Please specify a copy method |
599 | E | Processing canceled by user |
600 | E | Position cursor on & |
601 | E | Select end of block |
602 | E | Moving causes no change |
603 | E | No field catalogs exist |
604 | E | Moving possible only if related blocks selected |
605 | E | Selection not possible (& has already been copied) |
606 | E | Copying not possible (& has already been copied) |
607 | E | Already selected & not copied |
608 | E | Table & not in Dictionary (contact your systems administrator) |
609 | E | Table field not in Dictionary (contact your systems administrator) |
610 | E | Error reading table & from Dictionary |
611 | E | Choose no less than & & |
612 | E | Choose no more than & & |
613 | E | Line length will be exceeded (choose no more than & &) |
614 | E | Processing not defined (contact your systems administrator) |
615 | E | Select at least & & |
616 | E | Do not select more than & & |
617 | E | Field name contains more than ten characters. Transfer not possible. |
618 | E | Only different key figures can be copied. |
619 | E | You do not have authorization for & |
620 | E | Please place cursor on field or source table |
621 | E | No information available for field &-& |
622 | E | No information available for the fields in table & |
623 | E | Processing of units maintenance terminated |
624 | E | Unit is used in info structure &, deletion cancelled |
625 | E | Unit & created |
626 | E | Unit & deleted |
627 | E | No unit found, processing of units maintenance canceled |
628 | E | Primary key for DB table & was not converted! |
629 | E | Errors occurred during conversion of database table & |
630 | E | No extraction structure active or no BW connected |
631 | E | Combination: Event/Update group (&/&) does not exist! |
632 | E | Too many communication structure at time &1 (internal error) |
633 | E | Detailed new setup does not match info structure |
634 | E | & is not a valid update group |
635 | E | & is not a valid update event |
636 | E | Key figure &: Choose column width between &1 and &2 |
637 | E | Fill in posting date |
638 | E | Version contains no data |
639 | E | Date fields for info structure S032 are not generated |
640 | E | No standard analyses are defined for info structure & |
641 | E | You must define at least one characteristic of type ' '! |
642 | E | Wrong extractor for BW transfer structure & |
643 | E | Report/function module & is obsolete |
644 | E | & : Key figure hierarchy is lower than characteristics hierarchy |
645 | E | Warning messages occured - read long text |
646 | E | & : Date field hierarchy is lower than key figure hierarchy |
647 | E | Formula and external program cannot be used simultaneously |
648 | E | Form routine and associated program should always be specified together |
649 | E | Inconsistent document tables for document &1 (&2) |
650 | E | BW transfer structure &1 cannot be processed in copy management |
660 | E | No data for starting run exists |
685 | E | & : Rule key figure/characteristic inconsistent |
686 | E | Internal error occured when checking entries or possible entries field |
687 | E | No self-defined unit found. Processing terminated |
688 | E | Error for self-defined units |
689 | E | Error when archiving selection versions |
690 | E | Selection version & cannot be reloaded. (Error &) |
691 | E | Settings for target info structure &1 were changed! ---> Long text |
692 | E | Changed settings in key figure processing! ---> Long text |
693 | E | An error occured during generation of information structure &1. |
694 | E | The information structure & cannot be deleted |
696 | E | Table name has more than ten characters - transfer not possible |
697 | E | Basic communication structure cannot be transported |
698 | E | Communication structure & changed after creating event & |
699 | E | You do not have developer authorization for processing IDocs |
700 | E | *** 700 - 799 Maintain LIS inbound interface *** |
701 | E | Event & is located in the SAP name range! |
702 | E | LIS inbound interface & was created! & & |
703 | E | Function modules are not generated for event &! |
704 | E | The event & does not belong to any generated LIS inbound interface! |
705 | E | LIS inbound interface & was deleted! |
706 | E | Function modules for event & were created! & & |
707 | E | Function modules in LIS environment & were deleted! |
708 | E | Event & does not exist! (check entry) |
709 | E | There were no changes! (Saving and generating not necessary) |
710 | E | LIS inbound interface & was changed! & & |
711 | E | Event & already exists! (check entry) |
712 | E | Event & was changed! |
713 | E | Function group & for event & was removed! (TMC5) |
714 | E | Function group & was assigned to event &! (TMC5) |
715 | E | Table &, entries & & &! |
716 | E | Table &, entries & & could not be &! |
717 | E | Subroutine & was & ! |
718 | E | Subroutine & could not be & ! |
719 | E | Data element & for reference field & does not have an entry (TMC6) |
720 | E | DDIC structure & not available for unit determination! (TMC6) |
721 | E | Data element & from DDIC structure & does not exist (unit determination) |
722 | E | Unit field name & from DDIC structure & is not in table TMC6! |
723 | E | Event text (TMC5T) for language & and event & already exists! |
724 | E | Communications structures already exist for event & (TMC20) |
725 | E | Communication structure & has already been created for application &! |
726 | E | Unit & with hierarchy & alrady exists for event & (TMC24) |
727 | E | Event & will be &! |
728 | E | The dependent table entries will be &! |
729 | E | Event & was deleted! |
730 | E | Communication structure & does not exist! (check entry) |
731 | E | The field BUKRS (company code) does not exist in your structure! |
732 | E | The field SUPKZ does not exist in your structure! |
733 | E | There is no date field (DATS type) in your structure! |
734 | E | Warnings were found when the communication structure was checked (Log) |
735 | E | Event created! |
736 | E | All event changes were withdrawn due to errors! |
737 | E | Customer name range for & exhausted! |
738 | E | Termination due to internal errors in program &! |
739 | E | Multi-level communications structures are not currently supported! |
740 | E | Sample report & does not exist! FM generation was terminated! |
741 | E | Function module & could not be deleted! |
742 | E | Function group & could not be deleted! -> Reason: & |
743 | E | Function module & was deleted! |
744 | E | Function group & was deleted! |
745 | E | Function module & could not be created! -> Reason: & |
746 | E | All system changes were withdrawn! |
747 | E | Unit/event & & already exists with different contents & &. (TMC24) |
748 | E | A new unit & was added for field & & ! (TMC6) |
749 | E | The object & blocked by user & ! |
750 | E | The object & cannot be blocked! Please try again later! |
751 | E | Event & cannot be deleted, it is still being used! |
752 | E | Info structure &, field &, update &, exist in client & ! |
753 | E | In certain circumstances, not all affected programs are displayed here! |
754 | E | SAP basis application not available: Generation terminated! |
755 | E | Function code & not supported on this screen! (Entry was ignored) |
756 | E | IDoc & is read and checked for LIS significance! |
757 | E | IDoc segment & is interpreted as a communication structure! |
758 | E | IDoc & does not exist! (Please check entry) |
759 | E | Multi-level IDocs are not supported at present! |
760 | E | IDoc & does not have a segment! (Maintain the IDoc first) |
761 | E | The function group cannot contain any blank characters! |
762 | E | No IDoc port was created to correspond with your selection! |
763 | E | No inbound interface was found for structure & ! |
764 | E | More than one inbound interface was found for structure & ! |
765 | E | IDoc does not contain any data! (Processing terminated) |
766 | E | You do not have authorization for the LIS inbound interface! |
767 | E | The LIS Basis IDoc 'LIS_EXTR' is not used in IDoc &! |
768 | E | LIS inbound interface was not generated (user entry)! |
769 | E | The IDoc input descriptions were created! |
770 | E | The IDoc input descriptions were created! |
771 | E | No values exist for this field as yet! -> Long text |
772 | E | You terminated the transport maintenance or there were transport problems |
773 | E | Event & is allocated to inbound function module & |
774 | E | No inbound function module could be determined for event &! |
775 | E | The IDoc entry description already exists! |
776 | E | Value & for field & does not exist in table &! |
777 | E | Communication structure & contains errors! (Reason: &) |
778 | E | Unit & cannot be deleted! It is being used by event &. |
779 | E | The LIS interface & is inconsistent! Processing impossible! |
780 | E | No report & with enhancement structures for formulas and requirements! |
781 | E | Communication structure & already exists in INCLUDE &! |
782 | E | Structural definition for formulas and requirements (application &) & ! |
783 | E | Incorrect generation of program & |
784 | E | No information structure with active updating exists! |
785 | E | Event & cannot be used for the IDoc interface! |
786 | E | This combination of reference table and reference field is not allowed! |
787 | E | Communication structure & does not contain a field of type & ! |
788 | E | Communication structure & is incomplete and not active! |
789 | E | Incorrect generation of program & |
790 | E | Function group & already exists! |
791 | E | Reference program & not found |
792 | E | Parameter transfer missing in function module & |
793 | E | Segment type & exists as a dictionary object |
794 | E | Errors occurred while creating communication strcuture & |
795 | E | Errors occurred while creating IDoc segment & |
796 | E | Errors occurred while creating IDoc type & |
797 | E | Communication structure &1 does not contain field &2 |
798 | E | Segment definition of segment type &1 does not contain field &2 |
799 | E | Error while checking communication structure and segment definition |
800 | E | **************** SD statistics updating |
801 | E | Error determining target currency: SOrg & CoCode & |
802 | E | Error determining local currency: ER type 'M' date & from & to & RC & |
803 | E | Error converting quantities: DocUn & num. & denom. & RC & |
804 | E | Error NAMETAB_GET: structure & RC & |
805 | E | Statistics Update: No Entry in Table VSFK & |
806 | E | Statistics Update: No entry in Table VSFP & |
807 | E | No log for user & exists |
808 | E | Company code & for sales org. & does not exist (document &) |
809 | E | Sales organization & does not exist (document &) |
810 | E | Error determining rate: foreign curr. & local curr. & date & (doc. &) |
811 | E | Error converting quantity: unit & numerator & denominator & (doc. &) |
812 | E | Error after calling 'Determine open qties of schedules' for doc. & & |
813 | E | Error updating open quantities of schedule & |
814 | E | Program error reading XVBUK/XVBRK & in LMCS5U04/LMCS6U04 |
815 | E | Error in determ. loc.curr.: exchange rate ty. & date & from & to & |
830 | E | ***** 830-840 temporarily reserved for General Hierarchy **************** |
831 | E | The hierarchy is incorrect |
832 | E | No additional characteristic values can be attached to other char. values |
833 | E | No text determination possible as it is dependent on other fields |
850 | E | * 850-889 temporarily reserved for OIW: info catalog and BAPIs ** |
851 | E | OIW info catalog does not yet exist. |
852 | E | OIW info catalog already exists. |
853 | E | Standard OIW info catalog in the customer system cannot be maintained |
854 | E | The OIW info catalog is inconsistent. |
855 | E | Changes only possible in original language |
856 | E | The OIW info catalog is currently locked by user & |
857 | E | No additional info objects can be attached to other info objects |
858 | E | The standard OIW info catalog has been successfully copied |
859 | E | The OIW info catalog is incorrect. |
860 | E | Display only, no maintenance authorization |
861 | E | OIW info catalog does not exist, no maintenance authorization. |
862 | E | No authorization for displaying or maintaining the OIW info catalog. |
863 | E | The OIW metadata has been deleted. |
864 | E | Missing texts have been added from master language |
870 | E | Data was read |
871 | E | The imported data source for the OIW is not available |
872 | E | Info object & from table & is not available |
873 | E | A common data source is not available for the info objects |
874 | E | Transfer the info objects to table COLUMNS_TO_READ |
875 | E | Info object & cannot be determined by data source imported |
876 | E | No data could be found for the selection requirements. |
877 | E | Value & is not available for the field SELECTION-SIGN |
878 | E | Value & is not available for the field SELECTION-OPTION |
879 | E | Info object/data source &/& cannot be selected |
880 | E | Only 1 parameter is available for info object/data source &/& |
881 | E | The OIW metadata is not maintained. |
882 | E | The OIW metadata has been read. |
883 | E | No metadata is maintained for info objects in the OIW info catalog |
884 | E | No authorization for displaying the OIW info catalog. |
890 | E | Capacity requirement for order &, operation & was reduced |
891 | E | Costs indicator does not correspond with update activation |
892 | E | Wait time that was used has been deleted |
893 | E | Performance settings currently locked by user & |
894 | E | Goods issue indicator does not correspond with update activation |
895 | E | You need to specify an update group for reference & |
896 | E | The unit does not have a time dimension |
897 | E | Operation indicator does not match update activation |
898 | E | Unit for (exact) execution time deleted |
899 | E | Execution time / lead time without unit |
990 | E | Data converted for info structure & client & |
991 | E | All statistical data successfully converted |