This bundle includes Echo Dot (3rd Gen) Charcoal and Philips Hue White A19 Medium Lumen Smart Bulb, 1100 Lumens. Built in Smart Home hub. Ask Alexa to control Zigbee-compatible devices. No additional Philips Hue hub required. Two choices for easy smart lighting - Start setting the mood with Hue Smart bulbs and your Echo device, supporting up to 5 Hue Bluetooth & Zigbee smart bulbs. Add the Hue Hub for whole-home smart lighting (up to 50 light points) and bonus features.
Check it out on amazon.com →The Message Class C5 (Planungsrezept) is a standard Message Class in SAP ERP and is part of the package CPC.
Message Class | C5 |
Short Text | Planungsrezept |
Package | CPC |
ID | Language | Text |
---|---|---|
000 | D | |
001 | D | Lesen Tabelle & mit SUBRC & in Programm & & |
002 | D | & & & & |
003 | D | Ändern in Tabelle &: von & Sätzen wurden & verbucht |
004 | D | Löschen in Tabelle &: von & Sätzen wurden & verbucht |
005 | D | Einfügen in Tabelle &: von & Sätzen wurden & verbucht |
006 | D | Pflegen Sie den Kopf und setzen Sie den Kopiervorgang mit ENTER fort |
007 | D | Bitte Umrechnungsfaktor-Devisor größer Null eingeben |
008 | D | Die ausgewählte Funktion & ist hier nicht definiert |
009 | D | Interner Fehler im Funktionsbaustein & & |
010 | D | Interner Fehler in Form-Routine & & |
011 | D | Interner Fehler im Modul & & |
012 | D | Blättern konnte nicht ausgeführt werden |
013 | D | Bitte eine Wert größer Null eingeben. |
014 | D | Bitte beachten Sie die Änderungsvorschrift '&' des Profils |
015 | D | Bitte CUA-Status für die Grafik vollständig pflegen |
016 | D | Änderungsbelegschreibung zu Tabelle &: Fehler bei 'GET_NAMETAB' |
017 | D | Änderungsbelegschreibung zu Tabelle &: Befehl 'OPEN' fehlt |
018 | D | Änderungsbelegschreibung zu Tabelle &: Fehler beim Befehl 'INSERT' |
019 | D | Änderungsbelegschreibung zu Tabelle &: Interner Fehler |
020 | D | Bitte Änderungsvorschrift '&' oder eine restriktivere verwenden |
021 | D | Bitte gültigen Stichtag eingeben |
022 | D | Ordnen Sie Material &1 im Werk &2 der Rezeptgruppe &3 Rezeptnummer &4 zu |
023 | D | Änderung der Änderungsvorschrift und Änderungsart nicht erlaubt |
024 | D | Rezeptgruppe wird beim Sichern automatisch neu vergeben |
025 | D | Die Eingabehilfe ist nur für Downtime-Felder verfügbar |
026 | D | Erfassen Sie ein gültiges Downtime-Element |
027 | D | Vorlage enthält referentielle Vorgänge. Kopieren nicht möglich. |
081 | D | Profil &1 wurde übernommen |
082 | D | Bitte ein Profil angeben |
083 | D | Stichtag wurde übernommen und Änderungsnummer zurückgesetzt |
084 | D | Intramaterial &1 für Produkfluß entspricht nicht dem Kopfmaterial &2 |
086 | D | Produktfluß ist zum &2 bereits an Phase &1 des Vorgangs definiert |
088 | D | |
173 | D | Bitte Rezeptnummer eingeben |
174 | D | Bitte Rezeptgruppe eingeben |
175 | D | Bitte Material und Werk oder Rezeptgruppe eingeben |
450 | D | |
451 | D | Anordnungsbeziehungen sind nur zwischen Phasen erlaubt |
452 | D | AOBs zwischen versch. Rezepten in einer Rezeptgruppe sind nicht erlaubt |
453 | D | Es müssen mindestens 2 Phasen vorhanden sein |
454 | D | Anordnungsbeziehungen konnten nicht angelegt werden |
455 | D | Die Anordnungsbeziehungen wurden erfolgreich generiert |
456 | D | Es gibt schon Anordnungsbeziehungen zwischen den Phasen |
457 | D | Generierung abgebrochen. Mindestens eine Phase gibt es doppelt |
500 | D | |
501 | D | Anlage & ist gesperrt |
502 | D | Bitte Werk zur Anlage eingeben |
503 | D | Kein Rezept für das Werk & vorhanden |
504 | D | Kein Rezept für die Anlage & vorhanden |
505 | D | Bitte geben Sie das Werk der Rezeptgruppe & ein |
506 | D | Kein Rezept zu den Selektionskriterien vorhanden |
507 | D | Bitte ein Werk eingeben |
508 | D | Netz & im Werk & ist nicht vorhanden |
509 | D | Planungsrezept $ $ ist zum Datum $ nicht gültig |
510 | D | Planungsrezept $ $ ist nicht durchgängig vom $ bis zum $ gültig |
511 | D | Planungsrezept & & im Ansatzmengenbereich nicht durchgängig gültig |
512 | D | Das Planungsrezept & & existiert nicht |
513 | D | Rezeptgruppe & hat mehrere Rezepte. Bitte eindeutig pflegen |
514 | D | Bitte eine Rezeptgruppe eingeben |
515 | D | Bitte Rezeptgruppe oder Material und Werk eingeben |
516 | D | Der Rezeptgruppe & ist bereits das Werk & zugeordnet |
517 | D | Rezept ist zum & nicht vorhanden. Bitte gültiges Rezept selektieren |
518 | D | Plantyp für Planungsrezepte nicht zulässig |
519 | D | Kein Planungsrezept angegeben |
520 | D | Stücklistenangaben unvollständig |
521 | D | Rezept existiert nicht. Anzeigen nicht möglich |
549 | D | - |
550 | D | |
551 | D | Bitte Nummer für Sekundärresource eingeben |
552 | D | Keine Sekundärresource markiert (Bitte markieren) |
553 | D | Erste markierte Sekundärressource ist bereits erreicht |
554 | D | Letzte markierte Sekundärressource ist bereits erreicht |
555 | D | Bitte andere Sekundärressourcennummer wählen, diese ist schon vorhanden |
600 | D | |
601 | D | Plantyp & nicht erlaubt |
602 | D | Zuordnung des Materials zum Rezept ist bereits vorhanden |
603 | D | Keine Fertigungsversion zum Material & & vorhanden |
604 | D | Bitte andere Fertigungsversion eingeben, & ist nicht vorhanden |
605 | D | Bitte Rezept eintragen |
606 | D | Bitte gültige Fertigungsversion zum Rezept auswählen |
607 | D | Bitte neue Fertigungsversion eingeben, & ist bereits vorhanden |
608 | D | Navigation in eine weitere Materialliste ist nicht möglich |
609 | D | Keine gültige Stückliste zum Material & Werk & vorhanden |
610 | D | Zum & & & existiert das Material nicht |
611 | D | Die Stücklistenalternative ist nicht vorhanden, wird hinzugefügt |
612 | D | Datum Fertigungsversion paßt nicht zur Stücklistenalternative |
613 | D | Losgröße der Fertigungsversion paßt nicht zur Stücklistenalternative |
614 | D | Bitte Vorschlag der Stücklistenalternative prüfen |
615 | D | Die Losgöße-Von darf nicht größer als die Losgröße-Bis sein |
616 | D | Das Datum-Bis liegt in der Vergangenheit |
617 | D | Zur Fertigungsversion existieren Serienaufträge mit anderer Gültigkeit |
618 | D | Stücklistenalternative wird in einem anderen Planungsrezept verwendet |
619 | D | Keine Fertigungsversion vorhanden |
620 | D | Umrechnen der Ansatzmengeneinh. auf die Materialmengeneinh. nicht möglich |
621 | D | Die Fertigungsversion & verwendet die Stückliste & bereits im Rezept & & |
622 | D | Das Material & & ist nicht dem Planungsrezept & & zugeordnet |
623 | D | Die Fertigungsversion & ist nicht für Material und Rezept gepflegt |
624 | D | Defaultregel & nicht erlaubt |
625 | D | Die Fertigungsversion & zum Rezept enthält keine Stücklistenalternative |
626 | D | Benutzer &1 sperrt den Materialstamm &2 &3 |
627 | D | Rezept & ist nicht vorhanden. Bitte vorhandenes Rezept eingeben. |
628 | D | Sie haben keine Berechtigung zum Bearbeiten der Fertigungsversion |
629 | D | Es existieren noch Fertigungsversionen |
630 | D | Prüfung ist aufgrund von Änderungen ggf. nicht aktuell - Bitte Speichern! |
631 | D | Existierende Fertigungsversionen werden nicht gelöscht |
632 | D | Feinplan &1 &2 ist genehmigungspflichtig |
633 | D | Keine Zuordnung Rezept zu Material vorhanden |
634 | D | Wenn Produktkostensammler aktiv, Defaultregel für period. Abrechn. wählen |
635 | D | Bitte zur Fertigungsversion immer Material und Werk angeben |
636 | D | Die angegebene Fertigungsversion existiert nicht |
637 | D | Die Selektionsparameter werden aus der Fertigungsversion übernommen |
638 | D | Die Fertigungsversion ist zum Stichtag nicht gültig |
639 | D | Plan oder Stückliste fehlt in Fertigungsversion |
640 | D | |
641 | D | Terminierung ohne Komponentenmengen |
642 | D | Stückliste fehlt in der Fertigungsversion |
643 | D | Formel führt zu Menge Null, Ergebnisse werden nicht in StüLi übernommen |
644 | D | Keine Berechtigung zum Anlegen der Zuordnung |
645 | D | Fehler bei Auflösung der Stückliste &1 im Planungsrezept &2 aufgetreten |
650 | D | |
651 | D | Langtext zum Rezept & konnte nicht kopiert werden |
652 | D | Rezeptgruppe & wird bereits bearbeitet von Benutzer & |
653 | D | Kein Rezept ausgewählt (Bitte markieren) |
654 | D | Liste zeigt keine Rezepte |
655 | D | Letztes markiertes Rezept ist bereits erreicht |
656 | D | Erstes markiertes Rezept ist bereits erreicht |
657 | D | Bitte andere Bezeichnung für Rezept wählen, diese ist schon vorhanden |
658 | D | In der Vergangenheit oder Zukunft sind Rezepte vorhanden |
659 | D | Rezept wurde gelöscht |
660 | D | Sie haben keine Berechtigung zum Löschen dieses Rezeptes |
661 | D | Bitte Ressourcennetz eingeben |
662 | D | Ändern nur mit Änderungsnummer möglich |
663 | D | Ändern nur mit entspr. Änderungsauftrag möglich |
664 | D | Ändern nur mit entspr. Änderungsauftrag und -art möglich |
665 | D | Bitte bei der Änderungsvorschrift & auch die Änderungsart eingeben |
666 | D | Ändern von Plan/Rezept & aufgrund der Änderungsvorschrift & nicht erlaubt |
667 | D | Wegen fehlender Anzeigeberechtigung werden nicht alle Rezepte ausgegeben |
668 | D | Wegen fehlender Anzeigeberechtigung werden keine Daten angezeigt |
669 | D | Löschvormerkung ist für alle Änderungsstände des Rezepts gültig |
699 | D | - |
700 | D | |
701 | D | Daten zur Klassenart & wurden noch nicht umgesetzt |
702 | D | Ressource & ist zum Löschen vorgemerkt |
703 | D | Ressource & ist gesperrt |
704 | D | Bitte bei Vorgängen Steuerschlüssel ohne Fremdbearbeitung wählen |
705 | D | Ressource & existiert nicht im Werk &. Vorgang & ohne Ressource kopiert |
706 | D | Steuerrezeptempfänger & in Werk & nicht vorhanden (Phase &) |
707 | D | Beim Löschen von Vorgängen werden auch zugehörige Phasen gelöscht |
708 | D | Res. & existiert nicht im Werk &. SekRes. zum Vorgang & ohne Res. kopiert |
709 | D | Material ist mehrfach in der Materialliste vorhanden |
749 | D | - |
750 | D | |
751 | D | Kein Vorgang markiert (Bitte Vorgang markieren) |
752 | D | Erster markierter Vorgang ist bereits erreicht |
753 | D | Letzter markierter Vorgang ist bereits erreicht |
754 | D | Bitte Cursor auf Zeile stellen, die eine Phase enthält |
755 | D | Nur hinzugefügte Sätze sind markierbar |
756 | D | Bitte Phase eingeben |
757 | D | Bitte zur Phase & einen Steuerrezeptempfänger eingeben |
758 | D | Bitte andere Phasennummer wählen, diese ist schon vorhanden |
759 | D | Bitte Nummer eines bereits vorhandenen Vorgangs eingeben |
760 | D | Bitte als Phase kennzeichnen |
761 | D | & ist eine Phase, bitte Nummer eines Vorgangs eingegeben |
762 | D | Die Ressource einer Phase wird automatisch aus dem Vorgang übernommen. |
763 | D | Bitte Nummer des übergeordneten Vorgangs eingeben |
764 | D | Steuerrezeptempfänger an Vorgängen werden automatisch gelöscht. |
765 | D | Bitte Vorgabewerte der Phase überprüfen |
766 | D | Steuerrezeptempfänger & wurde nicht gefunden |
767 | D | Steuerrezeptempfänger & ist nicht für eine Herstellanweisung vorgesehen |
768 | D | Die markierten Phasen besitzen nicht den gleichen Steuerrezeptempfänger |
769 | D | Kein Steuerrezeptempfänger für eine Herstellanweisung vorhanden |
770 | D | Es sind noch keine Phasen vorhanden |
771 | D | Für Phasen können keine Ressourcenauswahlbedingungen gepflegt werden |
772 | D | Die Phase & ist in dem Rezept & & nicht vorhanden |
773 | D | Bei der Prüfung der Herstellanweisung wurden keine Fehler gefunden |
800 | D | |
801 | D | Bitte andere Nummer wählen, diese ist schon vorhanden |
802 | D | Bitte zuerst zu löschendes Objekt markieren |
804 | D | Bitte numerischen Wert eingeben |
805 | D | Bitte Nummer größer 0 eingeben |
806 | D | Bitte Nummer eingeben |
807 | D | Bitte Prozeßvorgabeart eingeben |
808 | D | Prozeßvorgabeart & nicht vorgesehen (Bitte Eingabe überprüfen) |
809 | D | Markieren nicht möglich, bitte Cursor auf Zeile der Übersicht stellen |
810 | D | Bitte Cursor auf eine Zeile mit einer Prozeßvorgabe stellen |
812 | D | Erste markierte Phase ist bereits erreicht |
813 | D | Letzte markierte Phase ist bereits erreicht |
814 | D | Keine Phase markiert (Bitte Phase markieren) |
815 | D | Es wurden & Prozeßvorgabemerkmale gelöscht |
816 | D | Es wurden & Prozeßvorgabemerkmale angelegt |
817 | D | Es wurden & Prozeßvorgabemerkmale gelöscht und & angelegt |
818 | D | Prozeßvorgabenummer &/&/&/& ist nicht eindeutig |
819 | D | Prozeßvorgabe Datum &: Nummer & ist nicht eindeutig |
820 | D | Prozeßvorgabe & in Werk & nicht vorhanden |
850 | D | |
851 | D | Keine Prozeßvorgabe markiert (Bitte Prozeßvorgabe markieren) |
852 | D | Erste markierte Prozeßvorgabe ist bereits erreicht |
853 | D | Letzte markierte Prozeßvorgabe ist bereits erreicht |
854 | D | Bitte Cursor auf eine Zeile mit einem Prozeßvorgabemerkmal stellen |
855 | D | Kein Prozeßvorgabemerkmal markiert (Bitte Merkmal markieren) |
856 | D | Erstes Prozeßvorgabemerkmal ist bereits erreicht |
857 | D | Letztes Prozeßvorgabemerkmal ist bereits erreicht |
858 | D | Langtext zu Prozeßvorgabemerkmal & konnte nicht kopiert werden |
859 | D | Es konnte kein Prozeßvorgabemerkmal ausgewählt werden |
860 | D | Prozeßvorgabemerkmal & ist nicht vorhanden (Bitte Eingabe prüfen) |
861 | D | Interner Fehler bei der Merkmalbewertung: Bitte anderen Wert eingeben |
862 | D | Kein Merkmal mit Langtextbewertung markiert (Bitte Merkmal markieren) |
863 | D | PVMerkmalnummer &/&/&/& ist nicht eindeutig |
864 | D | PVMerkmal Datum &: Nummer & (ProzVorg &) ist nicht eindeutig |
866 | D | Merkmalsbewertung entspricht nicht den Einschränkungen im Customizing |
899 | D | Messagenummern 900 bis 999 sind für Kunden reserviert !!! |
900 | D | |
901 | D | Fehler READ Tabelle & Subrc & Funktion & & |
902 | D | Fehler Funktionsbaustein & & & & |
903 | D | Fehler INSERT Tabelle & Subrc & Funktion & & |
904 | D | Fehler UPDATE Tabelle & Subrc & Funktion & & |
905 | D | Fehler DELETE Tabelle & Subrc & Funktion & & |
906 | D | Fehler Funktionsbaustein & & & & |
907 | D | Fehler Programm & Module & & & |
908 | D | Fehler Programm & Form-Routine & & & |
909 | D | Fehler Funktion & ist unzulässig |
910 | D | Fehler unzulässiger Bild-Aktivitätstyp & & & & |
911 | D | Fehler Liste in Dialogtabelle nicht vorhanden & & & & |
912 | D | Fehler Fehlende Parameter bei Blätterfunktion & & & & |
913 | D | Fehler unzulässiger F-Code & & & & |
914 | D | Fehler Aktuelle Prozeßvorgabe nicht gefunden & & & & |
915 | D | Fehler Aktuelles Prozeßvorgabemerkmal nicht gefunden & & & & |
950 | D | ProgFehler: Code & in Programm & Form & & |
951 | D | ProgFehler: Code & in Programm & Module & & |
952 | D | ProgFehler: Code & in Funktionsbaustein & & & |
999 | D | & & & & |
000 | E | *-------------------Currency translation -------------------------------* |
001 | E | Read Table & with SUBRC & in program & & |
002 | E | & & & & |
003 | E | Change table &: of & records & have been updated |
004 | E | Delete in table &: of & records & have been updated |
005 | E | Insert in table &: of & records & have been updated |
006 | E | Enter header data and choose ENTER to continue copying |
007 | E | Enter conversion factor divisor greater than zero |
008 | E | Requested function & not supported here |
009 | E | Internal error in function module & & |
010 | E | Internal error in form routine & & |
011 | E | Internal error in module & & |
012 | E | System could not scroll |
013 | E | Enter a value greater than zero |
014 | E | Note the change rule '&' assigned to the profile |
015 | E | Maintain CUA status completely for the graphics |
016 | E | Change document creation for table &: Error at 'GET_NAMETAB' |
017 | E | Change document creation for table &: Command 'OPEN' is missing |
018 | E | Change document creation for table &: Error at command 'INSERT' |
019 | E | Change document creation for table &: Internal error |
020 | E | Use change rule & or one that is more restrictive |
021 | E | Enter a valid key date |
022 | E | Assign material &1 in plant &2 to recipe group &3 with recipe number &4 |
023 | E | Changes to change rule and change type are not allowed |
024 | E | Recipe group is automatically reassigned when you save |
025 | E | Input help is only available for downtime fields |
026 | E | Enter a valid downtime element |
027 | E | Template contains referring operations. Copying is not possible |
081 | E | Profile & 1 was copied |
082 | E | Enter a profile |
083 | E | Key date was copied and change number was reset |
084 | E | Intra material &1 for product flow is not identical to header material &2 |
086 | E | Product flow has already been defined at phase &1 of the operation for &2 |
173 | E | Enter recipe number |
174 | E | Enter recipe group |
175 | E | Enter a material and plant, or a recipe group |
029 | E | Table & does not exist |
030 | E | No entries exist for method > & < |
032 | E | Possible entries not supported for 'Special Ledger' |
034 | E | Method must be active in order to transport |
036 | E | Enter debit and credit item |
038 | E | Not all sets exist in Table & |
040 | E | Data table not 'TT' type |
042 | E | Curreny translation key 3 and 4 not supported by the GL System |
044 | E | Assign GLT2 when using consolidation |
450 | E | Relationships |
451 | E | You can only maintain relationships between phases |
452 | E | You cannot maintain relationships between different recipes of one group |
453 | E | At least 2 phases must exist |
454 | E | Unable to create relationships |
455 | E | Relationships were generated successfully |
456 | E | Relationships already exist between the phases you have selected |
457 | E | Generation terminated, at least one phase is used twice |
500 | E | Recipe: Initial Screen |
501 | E | Line & is blocked |
502 | E | Enter a plant for the line |
503 | E | No recipes exist for plant & |
504 | E | No recipes exist for line & |
505 | E | Enter the plant allocated to recipe group & |
506 | E | No recipes exist for this selection criteria |
507 | E | Enter a plant |
508 | E | Network & in plant & does not exist |
509 | E | Master recipe $ $ is not valid for date $ |
510 | E | Master recipe $ $ is not valid from $ through to $ |
511 | E | Master recipe & & is not generally valid in charge quantity interval |
512 | E | Master recipe & & does not exist |
513 | E | The recipe group contains several master recipes. Enter recipe number. |
514 | E | Enter a recipe group |
515 | E | Enter recipe group or material and plant |
516 | E | Plant & already allocated to recipe group & |
517 | E | No recipe found for &. Enter a valid one. |
518 | E | Task list type not allowed for master recipes |
519 | E | No master recipe specified |
520 | E | BOM data is incomplete |
521 | E | Recipe does not exist, display not possible |
549 | E | - |
550 | E | Secondary resources |
551 | E | Enter number for secondary resource |
552 | E | Select a secondary resource |
553 | E | You have reached the first secondary resource selected |
554 | E | You have reached the last secondary resource selected |
555 | E | Select another secondary resource number, this one already exists |
600 | E | Material allocation |
601 | E | Task list type & not allowed |
602 | E | This assignment of material to recipe already exists |
603 | E | No production versions exist for material $ $ |
604 | E | Enter a new production version, & does not exist |
605 | E | Enter a recipe |
606 | E | Select a valid production version for the recipe |
607 | E | Enter a new production version, & already exists |
608 | E | You cannot branch to another material list |
609 | E | No valid BOM exists for material & plant & |
610 | E | The material does not exist for & & & |
611 | E | This BOM alternative does not exist. It will be created |
612 | E | Date of production version does not match BOM alternative |
613 | E | Lot size of production version does not match BOM alternative |
614 | E | Check BOM alternative proposal |
615 | E | The 'from' lot size must not exceed the 'to' lot size |
616 | E | The 'to' date is in the past |
617 | E | Run schedule headers with a different validity exist for production vers. |
618 | E | BOM alternative is used in a different master recipe |
619 | E | No production version exists |
620 | E | You cannot convert the charge quantity unit to the material quantity unit |
621 | E | Production version & uses the BOM & in recipe & & |
622 | E | Material & & is not allocated to master recipe & & |
623 | E | Production version & has not been maintained for material and recipe |
624 | E | Default rule & not allowed |
625 | E | Production version & for the recipe does not have a BOM alternative |
626 | E | Material master &2 &3 is locked by user &1 |
627 | E | Recipe & does not exist. Enter an existing recipe |
628 | E | You do not have authorization to edit the production version |
629 | E | Production versions still exist |
630 | E | Changes may have been made. Checks may not be current - Save entries |
631 | E | Existing production versions are not deleted |
632 | E | Detailed plan &1 &2 requires approval |
633 | E | No material/recipe allocation found |
634 | E | If product cost collector active, choose default rule f. period.settlemnt |
635 | E | Always enter a material and a plant for the production version |
636 | E | The production version you specified does not exist |
637 | E | Selection parameters are taken over from production version |
638 | E | The production version is not valid for the key date |
639 | E | Task list or BOM missing in production version |
640 | E | |
641 | E | Scheduling without component quantities |
642 | E | BOM is missing in production version |
643 | E | Formula results in quantity of zero, results are not transferred to BOM |
644 | E | You are not authorized to create the assignment |
645 | E | Error occurred when exploding BOM in &1 in master recipe &2 |
650 | E | Recipe header |
651 | E | Long text for recipe & cannot be copied |
652 | E | Recipe group & is being processed by user & |
653 | E | Select a recipe |
654 | E | List does not show any recipes |
655 | E | You have reached the last recipe selected |
656 | E | You have reached the first recipe selected |
657 | E | Select another description for recipe, this one already exists |
658 | E | Recipes exist in the past or in the future |
659 | E | Recipe deleted |
660 | E | You do not have authorization to delete this recipe |
661 | E | Enter a resource network |
662 | E | Changes can only be made with a change number |
663 | E | Changes can only be made with a corresponding engineering change order |
664 | E | Changes can only be made with a corr. engineering change order and type |
665 | E | Enter a change type for change rule & |
666 | E | You cannot change task list/recipe & because of change rule & |
667 | E | Not all recipes are displayed due to missing display authorization |
668 | E | No data displayed as you do not have the required display authorization |
669 | E | Deletion flag is valid for all change statuses of the recipe |
699 | E | - |
700 | E | Operations |
701 | E | Data for class type & has not been converted yet |
702 | E | Resource & is marked for deletion |
703 | E | Resource & is locked |
704 | E | For operations, choose control key without external processing |
705 | E | Resource & does not exist in plant &. Operation & was copied w/o resource |
706 | E | Control recipe destination & does not exist in plant & (phase &) |
707 | E | Subordinate phases will also be deleted when you delete operations |
708 | E | Res. & does not exist in plant &. Sec.res. for op. & was copied w/o res. |
709 | E | Materials is available in the material list more than once |
749 | E | - |
750 | E | Phases |
751 | E | Select an operation |
752 | E | You have reached the first operation selected |
753 | E | You have reached the last operation selected |
754 | E | Place the cursor on a line containing a phase |
755 | E | You can only select created records |
756 | E | Enter a phase |
757 | E | Enter a control recipe destination for phase & |
758 | E | Select another phase number, this one exists |
759 | E | Enter the number of an existing operation |
760 | E | Mark as a phase |
761 | E | & is a phase, enter the number of an operation |
762 | E | The resource of a phase is automatically copied from the operation |
763 | E | Enter the number of the superior operation |
764 | E | Ctrl recipe destinations assigned to operations are deleted automatically |
765 | E | Check the standard values for the phase |
766 | E | Control recipe destination & not found |
767 | E | Control recipe dest. & is not supported for a PI sheet |
768 | E | The phases you selected do not have the same control recipe destinations |
769 | E | No control recipe destinations exist for PI sheet |
770 | E | No phases exist yet |
771 | E | You cannot maintain resource selection conditions for phases |
772 | E | Phase & does not exist in recipe & & |
773 | E | No error found during PI sheet check |
800 | E | Process instructions |
801 | E | Select another number, this one already exists. |
802 | E | Select the object to be deleted first |
804 | E | Enter a numeric value |
805 | E | Enter a number greater than 0 |
806 | E | Enter a number |
807 | E | Enter the process instruction category |
808 | E | Process instr. cat. & does not exist (check entry) |
809 | E | Selection not possible, position cursor on overview line |
810 | E | Position cursor on a line that contains a process instruction |
812 | E | You have reached the first phase selected |
813 | E | You have reached the last phase selected |
814 | E | Select a phase |
815 | E | & process instruction characteristics deleted |
816 | E | & process instruction characteristics created |
817 | E | & process instruction characteristics deleted and & created |
818 | E | Process instruction number &/&/&/& is not unique |
819 | E | Process instruction date &: Number & is not unique |
820 | E | Process instruction & does not exist in plant & |
850 | E | Process instruction characteristics |
851 | E | Select a process instruction |
852 | E | You have reached the first process instruction selected |
853 | E | You have reached the last process instruction selected |
854 | E | Position cursor on a line containing a process instruction characteristic |
855 | E | Select a process instruction characteristic |
856 | E | You have reached the first process instruction characteristic selected |
857 | E | You have reached the last process instruction characteristic selected |
858 | E | Unable to copy long text for process instruction characteristic & |
859 | E | The system could not select a process instruction characteristic |
860 | E | Process instruction characteristic & does not exist (check entry) |
861 | E | Internal error during char. value assignment: Enter different value |
862 | E | Select a characteristic with a long text assignment |
863 | E | PIC number &/&/&/& is not unique |
864 | E | PI characteristic date & number & (process instruction &) is not unique |
866 | E | Characteristic value does not comply with restrictions in Customizing |
899 | E | Message numbers 900 to 999 are reserved for customers !!! |
900 | E | System messages |
901 | E | Error in READ table & Subrc & function & & |
902 | E | Error Function module & & & & |
903 | E | Error INSERT Table & Subrc & Function & & |
904 | E | Error UPDATE Table & Subrc & Function & & |
905 | E | Error DELETE Table & Subrc & Function & & |
906 | E | Error Function module & & & & |
907 | E | Error Program & Module & & & |
908 | E | Error Program & Form routine & & & |
909 | E | Error Function & not permitted |
910 | E | Error - screen activity type & & & & not allowed |
911 | E | Error - list in online table does not exist & & & & |
912 | E | Error - missing parameters in scrolling function & & & & |
913 | E | Error - F code & & & & not allowed |
914 | E | Error - current process instruction not found & & & & |
915 | E | Error - current process instruction characteristic not found & & & & |
950 | E | Prog. error: Code & in program & form & & |
951 | E | Prog. error: Code & in program & modules & & |
952 | E | Prog. error: Code & in function module & & & |
099 | E | *--------End of currency translation------------------------------------* |
999 | E | & & & & |