Wenn der Standard nicht ausreicht: Mit diesem Buch lernen Sie, IDocs selbstständig zu programmieren und zu erweitern. Die Autorin beschreibt Customizing-Techniken, die Erweiterung der Standardbausteine und komplette Eigenentwicklungen. Ob Rückmeldungen von Statuswerten, E-Mail-Workflows oder Serialisierung – für alle Aufgaben finden Sie Anleitungen und Tipps aus der Programmierpraxis. Neu in dieser Auflage: Überwachung und Fehlerbehandlung mit dem SAP Application Interface Framework.
Bei amazon.de ansehen →The Message Class UMG (Message Class for the Unicode Migration Tool.) is a standard Message Class in SAP ERP and is part of the package SUMIG.
Message Class | UMG |
Short Text | Message Class for the Unicode Migration Tool. |
Package | SUMIG |
ID | Language | Text |
---|---|---|
000 | D | Fehler! |
001 | D | RFC-Destination nicht gefunden. Richten Sie eine RFC-Destination ein |
002 | D | Probleme bei RFC-Aufruf für &1. Testen Sie die Verbindung (sm59) |
003 | D | Tabellen wurden eingefügt |
004 | D | Noch nicht implementiert |
005 | D | Wählen Sie eine Zeile aus |
006 | D | Keine Einträge gefunden in Tabelle UMGCCTL |
007 | D | Keine Einträge gefunden in Tabelle UMGTSKQ |
008 | D | Tabelle auswählen |
009 | D | Job konnte nicht eingeplant werden (sy-subrc = &1) |
010 | D | Batchjob konnte nicht gelöscht werden |
011 | D | Batch-Periode eingeben |
012 | D | Startzeit eingeben |
013 | D | Job existiert bereits |
014 | D | Job konnte nicht abgebrochen werden |
015 | D | Job nicht gefunden. Prüfen Sie das Protokoll |
016 | D | Sprachenlisten initialisiert |
017 | D | Job eingeplant |
018 | D | Batchjob-Namenssuffix eingeben |
019 | D | Bitte nur eine Zeile auswählen |
020 | D | Sprache &1 existiert bereits in Liste mit nicht eindeutigen Sprachen |
021 | D | Sprache &1 existiert bereits in Sprachenliste |
022 | D | Transaktionen SPUMG/SUMG wegen Test gesperrt (SE16: UMGTESTER) |
023 | D | Dokumentation nicht gefunden (&1). |
027 | D | Prüfergebnis aus Protokoll holen |
028 | D | Dictionary-Informationen konnten nicht abgerufen werden |
029 | D | Tabellennamen eingeben |
030 | D | Feldliste ist leer |
031 | D | Tabelle eingefügt |
032 | D | Bitte mindestens ein Feld auswählen |
033 | D | Diese Tabelle wurde bereits vollständig verarbeitet |
034 | D | Neustart nicht möglich |
035 | D | Tabelle wurde bereits verarbeitet |
037 | D | Checkpoint gelöscht |
039 | D | Keine transparente Tabelle |
040 | D | 'In Place'-Konvertierung ausgeschaltet |
041 | D | Die Protokolltabelle enthält noch einige Einträge |
042 | D | Auf erledigt gesetzt |
043 | D | Probleme mit Übergabe. Prüfen Sie das Protokoll |
044 | D | Manuelle Reparatur für diese Tabelle nicht zulässig |
045 | D | Prüfen Sie den Protokolleintrag |
046 | D | Kein Dictionary-Eintrag für Tabelle gefunden |
047 | D | Kein zu reparierendes Feld gefunden |
048 | D | Operation nicht möglich |
049 | D | Reparatur fehlgeschlagen. Prüfen Sie den Protokolleintrag |
050 | D | Es sind keine vorhergehenden Sets verfügbar |
051 | D | Es gibt keine Einträge mehr |
052 | D | Das eingegebene Feld existiert nicht |
053 | D | Diese Bedingung existiert bereits |
054 | D | Kein Filter angegeben, dieser Hinweis gilt für alle Einträge in Tabelle |
055 | D | Wortliste existiert nicht |
056 | D | Ergebnisse des Hinweises noch nicht verfügbar |
057 | D | Noch keine Ergebnisse verfügbar |
058 | D | Sprache nicht verfügbar oder in der Sprachenliste nicht aktiv |
059 | D | Tabelle im Arbeitsvorrat nicht verfügbar |
060 | D | Wortlisten-ID existiert bereits, wählen Sie eine andere |
061 | D | Wortlisten-ID wird noch in Hinweis (&1/&2) verwendet |
062 | D | Diese Tabelle wurde bereits zur manuellen Reparatur übergeben |
063 | D | In der Reparatur wird eine Schattentabelle verwendet |
064 | D | Tabelle muss manuell repariert werden |
065 | D | Umgeschaltet |
066 | D | Keine Schattentabelle verfügbar |
067 | D | Kein Umschalten erfolgt |
068 | D | Protokolltabelle nicht verfügbar |
069 | D | Es wird keine Schattentabelle verwendet |
070 | D | Aktion abgebrochen |
071 | D | Schattentabelle enthält noch Daten, Operation wird abgebrochen |
072 | D | Tabelle wird bereits verarbeitet |
073 | D | Kann nur für neue Tabelle aktiviert werden |
074 | D | Tabelle bereits für manuelle Reparatur angegeben |
075 | D | Sprache nicht aktiv oder in Sprachenliste nicht verfügbar |
076 | D | Diese Tabelle ist unbekannt |
077 | D | Tabelle existiert nicht im Dictionary, prüfen Sie mit SE11 |
078 | D | Hinweis kann nicht auf Tabellen mit Protokoll angewendet werden |
079 | D | Tabelle hat keinen Sprachenschlüssel, Operation abgebrochen |
080 | D | Tabelle wurde bereits verarbeitet |
081 | D | &1 wird noch verarbeitet, kann daher nicht aus AV gelöscht werden |
082 | D | Codepage &1 unbekannt |
083 | D | Kombination (&1, &2) nicht unterstützt |
084 | D | Tabelle &1 nicht im Arbeitsvorrat mit Status &2 |
085 | D | Sprache &1 nicht in globalem Sprachenpool |
086 | D | Zulässige Sprachenschlüssel sollten nicht in Ausnahmenliste sein |
087 | D | Lokaler Sprachenpool dieser Tabelle bereits berücksichtigt |
088 | D | Diese Operation ist nur für Tabellen mit lokalem Sprachenpool möglich |
089 | D | Tabellen mit lokalem Sprachenpool können nicht manuell repariert werden |
090 | D | Bereits in Bearbeitung |
091 | D | Tabelle wird noch verarbeitet, kann daher nicht gelöscht werden |
092 | D | Reparatur wird neu gestartet |
093 | D | Ergebnisse aus Protokoll holen |
094 | D | Tabelle &1 bereits gesperrt durch Benutzer &2 |
095 | D | keine Sperre |
096 | D | Sperre gelöscht |
097 | D | Sperre gehört Benutzer &1. Löschen nicht möglich |
098 | D | Sperre bereits gesetzt |
099 | D | Sperre erforderlich |
100 | D | Benutzer &1 (Mandant &2) hat bereits eine Sperre |
101 | D | Feld &1 nicht in Tabelle &2 vorhanden |
102 | D | Es gibt keine Batch-Server im System |
103 | D | Batch-Server &1 existiert nicht im System |
104 | D | Freie Abgrenzung für &1 fehlgeschlagen |
105 | D | Freie Abgrenzung mit Filter für &1 fehlgeschlagen |
107 | D | Anzeige aktualisieren |
108 | D | File cannot be opened |
109 | D | Hinweise gesichert |
110 | D | Das ist keine Hinweisdatei |
111 | D | Hinweise importiert |
112 | D | Es ist keine Filterdatei |
113 | D | Filter importiert |
114 | D | Filter exportiert |
115 | D | Eingabe nicht vollständig |
116 | D | Wortliste enthält Fehler. Prüfen Sie die Bedingung |
117 | D | Keine Fehler gefunden |
118 | D | Codepage angeben |
119 | D | Codepage nicht zulässig |
120 | D | Lesen Sie Hinweis 419006 |
121 | D | Unterstützung nur in Unicode-System |
122 | D | Probleme bei Jobsuche |
123 | D | Job existiert bereits. Verwenden Sie anderen Suffix |
124 | D | Programm ausgeführt |
125 | D | Probleme bei Ausführung von RADPOCNV |
126 | D | Sprache konnte keiner Codepage zugeordnet werden |
127 | D | Sprachenvektor ist leer. Prüfen Sie Tabellen TCPDB/TCP0I mit RSCPINST. |
128 | D | Nur eine Zeile erlaubt |
129 | D | Kein Dateiname angegeben |
130 | D | Datei &1 existiert bereits. Löschen oder umbenennen |
131 | D | Datei &1 konnte nicht zum Schreiben geöffnet werden |
132 | D | Fehler bei Aufruf POPUP_GET_VALUES |
133 | D | Fehler bei Aufruf EXPORT TO DATASET |
134 | D | Datei &1 konnte nicht zum Lesen geöffnet werden |
135 | D | Fehler bei Aufruf IMPORT FROM DATASET |
136 | D | Exportiert in Datei &1 |
137 | D | Eingefügt |
138 | D | Eingefügt und aktualisiert |
139 | D | Ungültiger Wert für Kollisionsauflösung. Zulässig sind M und O |
140 | D | Gültiger Bereich für Mindestwortlänge liegt zwischen 1 und 30 |
141 | D | Trennzeichenart ist leer, Feld wird auf alten Wert zurückgesetzt |
142 | D | Falsche Fallback-Codepage |
143 | D | Gesichert |
144 | D | Reparaturhinweise können nicht in Prä-Analyse durchgeführt werden |
145 | D | Ungültiger Wert für Checkpoint-Modus, wählen Sie Aktiv (A) o. Inaktiv (0) |
146 | D | Tabelle &1 existiert nicht |
147 | D | Kein Nametab-Eintrag für Tabelle '&1'. |
148 | D | Tabellenfeld hat nicht den Datentyp LANG (&1). |
149 | D | Tabellenkategorie &1 unbekannt. |
150 | D | Standard-Codepage &1 nicht zulässig |
151 | D | Wertlänge &1 überschreitet Feldlänge &2 |
152 | D | Fallback-Codepage &1 nicht zulässig |
153 | D | Einfügen fehlgeschlagen mit &1 |
154 | D | BIDI-Analyse ist aktiviert. Deaktivieren Sie MDMP |
155 | D | Nach Ausführen der Analyse ist ein Wechseln des Analysetyps nicht möglich |
156 | D | Konvertierung kann nicht gestartet werden |
157 | D | '&1' existiert bereits |
158 | D | Codepage-Einstellung erscheint falsch. Prüfen Sie TCPDB und TCP0D |
159 | D | Für Tabellenkategorie '1' dürfen Sie keine Standard-Codepage setzen |
160 | D | Für Tabellenkategorie '1' muss Sprachenfeldname angegeben werden |
161 | D | Für Tabellenkategorie '1' muss ACPR '0' sein |
162 | D | Für Tabellenkategorie '2' darf kein Sprachenfeldname gesetzt werden |
163 | D | Es existiert bereits ein Eintrag für Tabelle &1. |
164 | D | Vokabular-Existenz muss entweder 0 oder 2 sein. |
165 | D | Standard-Codepage muss für Tabellenkategorie '3' auf 1100 gesetzt werden. |
166 | D | Für Tabellenkategorie '2' darf keine Standard-Codepage gesetzt werden |
167 | D | Für Tabellenkategorie '3' darf kein Sprachenfeldname gesetzt werden |
168 | D | Für Tabellenkategorie '3' muss ACPR '0' sein |
169 | D | Für Tabellenkategorie '3' sollte Überspringen-Kennzeichen gesetzt werden |
170 | D | Für Tabellenkategorie '1' sollte Überspringen-Kennz. nicht gesetzt werden |
171 | D | Für Tabellenkategorie '2' sollte Überspringen-Kennz. nicht gesetzt werden |
172 | D | Sprache &1 konnte nicht hinzugefügt werden, erst aus Sprachliste löschen |
173 | D | Sprache &1 konnte nicht hinzugefügt werden, erst aus mehrd.SprListe lösch |
174 | D | Dateikodierung muss UTF-8 sein |
175 | D | SET LOCALE gescheitert! |
176 | D | Sprache &1 nicht aktiv, daher nicht zugelassen für Sprachenzuordnung! |
177 | D | Kann Quelle noch nicht reparieren |
178 | D | Kein Nachbearbeitungsprotokoll für Report- oder Dynproquelle vorhanden |
179 | D | Falscher Separatortyp: Erlaubt sind A (0x00-0x3F), B(0x20-0x3F), C |
180 | D | Batchjobs laufen. Warten Sie, bis sie beendet sind |
181 | D | Keine initialen Datensätze für Tabellen-Cluster gefunden |
182 | D | Tabellen-Cluster noch nicht geprüft. Konsistenzprüfung durchführen. |
183 | D | Nach Analysebeginn können Sie die Kollisionsbehandlung nicht mehr ändern |
184 | D | Nach Analysebeginn können Sie den Separatortyp nicht mehr ändern |
185 | D | Keine MDS-Protokoll für diese Tabelle verfügbar |
186 | D | Kein Eintrag im R3load-Protokoll für diese Tabelle vorhanden |
187 | D | Keine MDS-Tabelle gefunden |
188 | D | R3load-Protokolldatei kann nicht geöffnet werden, prüfen Sie Protokoll |
189 | D | R3load-Protokolldateien wurden in DB geladen |
190 | D | XML-Transformation fehlgeschlagen für &1 |
191 | D | Tabelle kann nicht eingefügt werden, könnte bereits in Tab. UMGTSKQ sein |
192 | D | Einige Tabellen existieren nicht in Tab. DD02L, können nicht eingefügt w. |
193 | D | Tabelle existiert nicht |
194 | D | Die Datenbank-Tabelle existiert nicht |
195 | D | Keine Details zu dieser Quelle |
196 | D | Indextabellen wurden eingefügt |
197 | D | Setzen der Codepage auf Indextabelle gescheitert |
198 | D | Cl_Repair_util kann nicht angelegt werden |
199 | D | Konvertierung gescheitert in cl_repair_util |
200 | D | Bedingungs-ID existiert bereits. Falls abwesend, ist Verwendung woanders. |
201 | D | Öffnen von Datei mit R3load-Protokolldateinamen (*.xml) nicht möglich |
202 | D | Konvertierungsobjekt (UTF8 nach sys) kann nicht angelegt werden |
203 | D | Konvertierung von Hex nach String gescheitert |
204 | D | Arbeitsvorrat gelöscht |
205 | D | Arbeitsvorrat kann nicht gelöscht werden |
206 | D | Wortlisten-ID für die Tabelle existiert bereits |
207 | D | Keine Zeilen geändert |
208 | D | Zuerst Indexteil dieser Tab. reparieren, ist noch in manueller Reparatur |
209 | D | Zeile(n) auswählen |
210 | D | Geben Sie eine gültige Zahl ein |
211 | D | Keine Indextabellen haben Probleme |
212 | D | Nicht alle Indextabellen in UMGINDX wurden in AV eingefügt |
213 | D | Nicht alle Quellen im R3load-Protokoll wurden in AV eingefügt |
214 | D | Laden Sie zunächst R3load-Protokolle |
215 | D | Kein Nachbearbeitungsprotokoll für manuell hinzugefügte Quelle vorhanden |
216 | D | Unerwartete Suchebene gefunden! |
217 | D | Nach Analysestart können Sie gemeinsame Zeichensatzeinstell. nicht ändern |
218 | D | Fallback-Codepage &1 nicht zulässig |
219 | D | Tabelle &1 existiert schon in Ausnahmenliste |
220 | D | Bedingung existiert nicht |
221 | D | Geben Sie eine Wortlisten-ID ein |
222 | D | Geben Sie eine Bedingungs-ID ein |
223 | D | Bedingung wird noch von einer Wortliste verwendet |
224 | D | Quelle kann nicht angezeigt werden |
225 | D | Sprache nicht löschbar, da sich sonst der Common Character Set ändert! |
226 | D | Hinweis-ID exitiert schon, wählen Sie eine andere |
227 | D | Hinweis wurde ausgeführt, bitte Hinweise nicht erneut ausführen |
228 | D | Diese Methode existiert nicht |
229 | D | Geben Sie eine Methode an |
230 | D | Sprachenliste kann nach Start der Suche in mehrdeut.Spr. nicht bearb.werd |
231 | D | Sprache kann nicht gelöscht werden, wird im Wortschatz verwendet |
232 | D | Wählen Sie ein Tabellen-Cluster aus dem Baum |
233 | D | Markieren Sie ein Tabellen-Cluster oder doppelklicken Sie einen Knoten |
234 | D | Initiale Sätze werden aus Tabellen-Cluster gelöscht |
235 | D | Keine initialen Sätze für dieses Cluster gefunden |
236 | D | Prüfen Sie zuerst Tabellen-Cluster |
237 | D | SPUMG-Konvertierungshistorie gesichert |
238 | D | Zuerst Report UMG_HISTORY ausführen und Konvertierungshistorie sichern |
239 | D | Wählen Sie Eintrag aus Liste 'Unicode-Konvertierungshistorie' |
240 | D | Fehler im Datei-Sichern-Dialog (&1) |
241 | D | Verwenden Sie die Dateierweiterung 'voc' |
242 | D | Falscher Dateiname |
243 | D | Fehler in Datei-Öffnen-Dialog (&1) |
244 | D | Fehler beim Hochladen der Datei &1 |
245 | D | Hochladen des Wortschatzes abgeschlossen |
246 | D | Fehler beim Herunterladen der Datei &1 |
247 | D | Herunterladen des Wortschatzes abgeschlossen |
248 | D | Hochladen der Zeichenstatistik abgeschlossen |
249 | D | Markieren Sie einen Tabellen-Pool im Baum |
250 | D | Markieren Sie einen Tabellen-Pool oder doppelklicken Sie einen Knoten |
251 | D | Ungültige Sätze werden aus dem Tabellen-Pool gelöscht |
252 | D | Keine ungültigen Sätze in diesem Pool gefunden |
253 | D | Prüfen Sie zuerst den Tabellen-Pool |
254 | D | Sprachenliste bereits initialisiert |
255 | D | Upload von Hinweisen beendet |
256 | D | Download beendet |
257 | D | UMG_POOL_TABLE bereits erfolgreich ausgeführt |
258 | D | SAP-Einträge können nicht modifiziert werden |
259 | D | Geben Sie einen Klassennamen ein |
260 | D | Transport nicht angelegt |
261 | D | Geben Sie einen Pfad ein |
262 | D | Dieser Report ist nur für Testzwecke vorgesehen |
263 | D | Änderung der R3trans-Option erst nach Start der Konsistenzprüfung möglich |
264 | D | Gemeinsamer Zeichensatz ist leer, Feld wird auf alten Wert zurückgesetzt |
265 | D | Kollisionsauflösung ist leer, Feld wird auf alten Wert zurückgesetzt |
266 | D | R3trans-Sprachen-Codepage leer, Feld wird auf alten Wert zurückgesetzt |
267 | D | Gültiger Bereich für Kontrollpunkt-Häufigkeit bei 2000000 bis 2147483647 |
268 | D | Tabelle TCPDB ist leer, konfigurieren Sie Ihr System mit RSCPINST |
269 | D | Tabelle noch in Bearbeitung, warten Sie, bis Analyse beendet ist |
270 | D | Neuer Status kann nur N, M oder C sein |
271 | D | Nur Status N, M oder S kann geändert werden |
272 | D | Status für diesen Tabellentyp kann nicht geändert werden |
273 | D | Sprachenliste kann nicht abgerufen werden, da keine Historie vorhanden |
274 | D | Sprachenliste erfolgreich aus UMG-Historie abgerufen. |
275 | D | Sprachenliste vorhanden, Bearbeitung muss in Transaktion SPUMG erfolgen |
276 | D | Exportkennzeichen für INDX-artige Tabellen leer, alter Wert wird gesetzt |
277 | D | Änderung der INDX-Option erst nach Start der Konsistenzprüfung möglich |
278 | D | RADCUCNT läuft bereits. |
279 | D | Protokoll von RADCUCNT ist leer. |
280 | D | Problem bei Aufruf von 'WRITE_LIST'. |
281 | D | Tabelle TCP0I ist leer. Konfigurieren Sie Ihr System mit RSCPINST. |
282 | D | Fehler: Globale Fallback-Codepage ist auf 6100, 6200, 6500 gesetzt. |
283 | D | Job u.U. durch andere Programme wie SM37 abgebrochen od. System-Shutdown |
284 | D | Markieren Sie einen Report im Baum. |
285 | D | Die letzte aktive Sprache kann nicht gelöscht werden |
286 | D | Markieren Sie das Feld 'Nachricht' |
287 | D | Klasse &1 existiert bereits |
288 | D | Referenztyp muss 'D', 'E', 'I', 'J', 'K', 'L' oder 'R' sein |
289 | D | Geben Sie einen Tabellennamen ein |
290 | D | Fehlerprotokolltyp muss 'N', 'I', 'W' oder 'E' sein |
291 | D | Strukturreferenz muss leer sein für Referenztyp 'D' |
292 | D | Struktur muss leer sein für Strukturtyp 'I' |
293 | D | Containerfeld, Strukturreferenz und Fehlerprotokolltyp müssen leer sein |
294 | D | Feld &1 existiert nicht in Tabelle &2 |
295 | D | Struktur &1 enth#lt Felder, die nicht zeichenartige sind |
296 | D | Struktur &1 ist nicht flach |
297 | D | Struktur &1 ist länger als Containerfeld &2 |
298 | D | Position von Feld &1 > Position von Referenzfeld &2 |
299 | D | Für Referenztyp 'D' müssen Sie eine Struktur eingeben |
300 | D | Für Referenztyp 'I' müssen Sie eine Strukturreferenz eingeben |
301 | D | Sprache SPACE kann aus mehrdeutiger Sprachenliste nicht gelöscht werden |
302 | D | Manche Tabellen gibt es bereits in der Standardausnahmenliste |
303 | D | Markieren Sie Tabellen-Cluster im Tree-Control |
304 | D | Wörter gelöscht aus dem externen Wortschatz |
305 | D | Codepage 6301 ist in Ihrem System nicht verfügbar |
306 | D | Versichern Sie sich, dass Codepage &1 korrekt im System installiert ist. |
307 | D | Verwenden Sie die Dateierweiterung 'twi' |
308 | D | Datensatz gelöscht. |
309 | D | Fehler beim Abrufen des Pfads. (SY-SUBRC = &1). |
310 | D | Keine Tabellen in Arbeitsvorrat für Nachbearbeitung gefunden |
311 | D | Hintergrundjob wurde bereits eingeplant. Prüfen Sie den Status in TA SM37 |
312 | D | Hintergrundjob für zusätzliche Vorbereitungsschritte wurde gestartet |
313 | D | Browser kann nicht geöffnet werden (sy-subrc = &1) |
314 | D | Problem beim Aufruf von 'POPUP_TO_CONFIRM'. Aktion wird abgebrochen |
315 | D | Vergewissern Sie sich, dass die DB-Statistiken aktuell sind (TA DB02) |
316 | D | Sprache 'U+0000' kann nicht in SPUMG-Sprachenliste aufgenommen werden |
317 | D | Variante mit Name &1 existiert nicht |
318 | D | Hochladen der Ausnahmen erfolgreich abgeschlossen |
319 | D | Aktualisieren Sie zunächst die SPUMG-Ausnahmetabellen |
320 | D | Führen Sie zunächst die 'zusätzlichen Vorbereitungsschritte' aus |
321 | D | Datei &1 entspricht nicht dem XML-Standard |
322 | D | Tabelle &1 ist nicht INDX-artig |
323 | D | Alle Reports sind verfügbar |
324 | D | Warnung: SPUMG-Scanjobs werden ausgeführt |
325 | D | Sie haben keine Berechtigung für diese Aktion (siehe Langtext) |
326 | D | Fehler aufgetreten, prüfen Sie das Hauptprotokoll |
327 | D | Sie sind für die Arbeit mit Tabelle &1 nicht berechtigt |
328 | D | Wählen Sie einen Batch-Server |
329 | D | Wählen Sie eine Zielsprache |
330 | D | Nur eine Zeile zulässig, Ausführung mehrerer Hinweise über Transakt. SUMG |
331 | D | Reparaturhinweis &1 nicht vorhanden |
332 | D | Unbekannter Objekttyp (Name: &1, Typ: &2, Formular: &3) |
333 | D | Paket bereits vorhanden. Wählen Sie einen anderen Namen. |
334 | D | Geben Sie Benutzernamen an |
335 | D | Geben Sie einen Paketnamen an |
336 | D | Paket &1 verfügt nicht über Status 'U' (Benutzer zugeordnet) |
337 | D | Paket &1 hat den Status 'Fertig', es wird nicht zugeordnet |
338 | D | Hintergrundjob wurde bereits eingeplant. Prüfen Sie den Status in TA SM37 |
339 | D | Die Zahl der Standardpakete muss zwischen 1 und 99 liegen. |
340 | D | Paket &1 ist für die Pflege geschlossen, weitere Änderungen nicht möglich |
341 | D | Paket &1 verfügt nicht über Status 'C' (Abgeschlossen) |
342 | D | Paket &1 hat Status 'R' (Freigegeben). Löschen nicht möglich. |
343 | D | Änderung der Split-Bedingungen momentan nicht möglich |
344 | D | Tabelle wurde in der Konsistenzprüfung nicht verarbeitet |
345 | D | Tabelle existiert nicht. |
346 | D | Aktion abgebrochen. Split-Bedingungen werden momentan modifiziert. |
347 | D | Tabelle hat den Status 'In Bearbeitung' oder 'Fehler'. |
348 | D | Die Tabelle wurde bereits eingefügt |
349 | D | Die Tabelle wurde in die Ausnahmenliste eingefügt. |
350 | D | Tabellenname zu lang (Anzahl Zeichen >26) |
351 | D | Tabelle &1 wird momentan verarbeitet, sie wird nicht zurückgesetzt |
352 | D | Markieren Sie eine Tabelle im Baum |
353 | D | Upload der Bedingungen abgeschlossen |
354 | D | Bedingungen löschen nicht möglich, Tabellen-Splitting freigegeben für &1 |
355 | D | Tabelle &1 hat den Status 'S', sie wird nicht zurückgesetzt |
356 | D | Tabellen-Splitting wurde bereits freigegeben |
357 | D | Tabellen-Splitting wurde für Tabelle &1 noch nicht freigegeben |
358 | D | Änderungen nicht möglich, Tabellen-Splitting wurde bereits freigegeben |
359 | D | Zurücksetzen von Tabelle &1 nicht möglich, sie ist in Pakete aufgeteilt |
360 | D | Tabelle &1 kann der Ausnahmeliste nicht hinzugefügt werden |
361 | D | Kein Nachbearbeitungs-/INDX-Protokoll für Tab. &1 abgelegt (s. Langtext) |
362 | D | Syntax-Fehler in SQL-Bedingung (Scan-Ebene=&1, Nummer=&2, &3) |
363 | D | Freigabe nicht möglich, Bedingungen weisen SQL-Syntaxfehler auf |
364 | D | Tabelle wurde noch nicht vollständig gescannt |
365 | D | Keine Syntaxfehler gefunden |
366 | D | Tabellen-Splitting für Tabelle &1 freigegeben |
367 | D | Zurücksetzen des Tabellen-Splitting für Tabelle &1 |
368 | D | Sprache &1 existiert nicht in T002 |
369 | D | Sprache &1 ist in der Liste der zulässigen Sprachen nicht enthalten |
370 | D | Zurücksetzen/Neustart nicht möglich. Worker-Jobs laufen noch |
371 | D | Ausnahmenliste nicht korrekt hochgeladen |
372 | D | Selektion auf &1 Treffer beschränkt |
373 | D | Sprache '?' kann nicht in SPUMG-Sprachenliste eingefügt werden |
374 | D | Reports dürfen nicht in einem Nicht-Unicode-System ausgeführt werden |
375 | D | Menü 'Cluster-Information' ist nicht mehr relevant (siehe Langtext) |
376 | D | Freigabe nicht möglich. Keine Informationen in Export Control Table |
377 | D | IUUC-Modus ist ausgeschaltet |
378 | D | SPUMG-Sprachenliste ist leer |
379 | D | Keine aktiven Codepages in der SPUMG-Sprachenliste |
380 | D | Keine Dictionary-Informationen für Struktur &1 verfügbar |
381 | D | Konvert.objekt konnte nicht angelegt werden (Quell-CP: &1, Ziel-CP: &2) |
382 | D | Konvertierungsobjekt konnte nicht angelegt werden (Quelle: &1 Ziel: &2) |
383 | D | Ziel-Codepage &1 wird nicht unterstützt |
384 | D | Text &1 konnte nicht in Unicode konvertiert werden |
385 | D | Binärfeld mit Inhalt &1 konnte nicht konverviert werden (Datentyp &2) |
386 | D | Keine Zuordnung für Tabellen und Strukturen gefunden (Rückgabewert &1) |
387 | D | Freigabe nicht möglich. Noch keine Bedingungen definiert |
388 | D | Benutzer &1 pflegt bereits Nachbearbeitungs-/INDX-Protokoll v. Tabelle &2 |
389 | D | Wählen Sie zuerst eine Tabelle durch Doppelklick auf d. Tabellennamen aus |
390 | D | Tabellen-Cluster &1 auf Ausnahmeliste gestellt. Lesen Sie den Langtext |
391 | D | Converter-Cache (CCC) nicht zurückgesetzt. Ursache &1 (siehe Langtext) |
392 | D | Paketname enthält Nicht-ASCII-Zeichen. Paket wurde nicht erstellt |
393 | D | Gültiger Bereich von 1 - 99. Paket nicht erstellt |
394 | D | Keine Sonderoptionen gefunden |
395 | D | Standardoption &1 darf hier nicht geändert werden |
396 | D | Geben Sie eine Option an |
397 | D | Wert &1 ist für Option &2 nicht erlaubt |
398 | D | Tabelle TCPDB enthält EBCDIC-Codepages |
399 | D | Keine Hinweise für Verarbeitung gefunden |
400 | D | Report darf nicht in Unicode-Systemen laufen |
401 | D | Syntaxfehler in SQL-Bedingung von &1 für Tabelle &2. Ursache: &3 |
402 | D | Konvertierungsobjekt (Global Fallback auf Sys) kann nicht angelegt werden |
403 | D | Sie müssen zur Ausführung des Reports eine exklusive Sperre setzen |
404 | D | Eine negative Zahl für Parameter &1 ist nicht zulässig |
405 | D | Hochladen nicht möglich. Funktionsbausteine fehlen (&1/&2). |
406 | D | Report kann nicht ausgeführt werden. CU&UC-Verfahren wurde nicht gefuden. |
407 | D | Report kann nicht ausgef.werden. Release-Info v.CU&UC-Verfahr. ist falsch |
408 | D | Report kann nicht ausgef.werden. Release-Info v.CU&UC-Verfahr. ist falsch |
409 | D | Transaktion SPUMG ist gerade gesperrt. Undefin. Status (siehe Langtext). |
410 | D | Transaktion SPUMG ist gerade gesperrt. Beenden Sie zuerst &1. |
411 | D | Unicode-Conversion-Tab.könnte beschädigte Einträge enthalten (s.Langtext) |
412 | D | SPUMG w.zurückgesetzt. Rufen Sie Transakt.SPUMG erneut auf, um z.beginnen |
413 | D | Transaktion SPUMG ist gerade gesperrt. Returncode: &1 |
414 | D | Option &1 existiert nicht |
415 | D | Tabelle &1 aus Scan ausgeschlossen (siehe Langtext) |
416 | D | Auswahl beinhaltet eine benutzerspezifische Tabelle. Siehe Langtext |
000 | E | Error! |
001 | E | Could not find RFC destination. Set up an RFC destination |
002 | E | Problems occurred during RFC call for &1. Test the connection (sm59) |
003 | E | The tables were inserted successfully |
004 | E | Not yet implemented |
005 | E | Please select a line |
006 | E | Could not find any entries in the table UMGCCTL |
007 | E | Could not find any entries in the table UMGTSKQ |
008 | E | Select a table |
009 | E | Could not schedule job (sy- subrc - &1 ). |
010 | E | Could not delete batch job |
011 | E | Enter a batch period |
012 | E | Enter a start time |
013 | E | Job already exists |
014 | E | Could not terminate job |
015 | E | Could not find job. Check log. |
016 | E | Language Lists were initialized successfully |
017 | E | Job scheduled successfully |
018 | E | Enter a batch job name suffix |
019 | E | Please mark only one row |
020 | E | Language &1 already in Ambiguous Language List |
021 | E | Language &1 already in Language List |
022 | E | Transactions SPUMG/SUMG are currently tested and locked (se16: UMGTESTER) |
023 | E | Documentation could not be found (&1). |
027 | E | Get result of check from log |
028 | E | Cannot get any Dictionary information |
029 | E | Enter a table name |
030 | E | Field list is empty |
031 | E | Table inserted successfully |
032 | E | Select at least one field |
033 | E | This table has already been completely processed |
034 | E | Cannot restart |
035 | E | Table has already been processed |
037 | E | Checkpoint deleted |
039 | E | Not a transparent table |
040 | E | 'In Place' conversion switched off |
041 | E | There are still some entries in the log table |
042 | E | Set to completed |
043 | E | Problems with transfer. Check the log |
044 | E | Manual repair is not allowed for this table |
045 | E | Check the log entry |
046 | E | Could not find a Dictionary entry for the table |
047 | E | Could not find a field to repair |
048 | E | Operation not possible. |
049 | E | Repair failed. Check log entry |
050 | E | There are no previous sets available |
051 | E | There are no more entries available |
052 | E | The field you entered does not exist |
053 | E | This condition already exists |
054 | E | No filter specified, this hint applies to all the entries in the table |
055 | E | Wordlist does not exist |
056 | E | The results of the hint are not yet available |
057 | E | No results are available yet |
058 | E | The language is not available or not active in the language list |
059 | E | The table is not available in the work list |
060 | E | The Wordlist ID already exists, please choose another Wordlist ID |
061 | E | The Wordlist ID is still being used in hint (&1/&2) |
062 | E | This table was already passed to a manual repair |
063 | E | A shadow table will be used in the repair |
064 | E | The table must be repaired manually |
065 | E | Switched successfully |
066 | E | Shadow table is not available |
067 | E | No switch took place |
068 | E | Log table is not available |
069 | E | No shadow table will be used |
070 | E | Action canceled |
071 | E | Shadow table still contains data, operation will be canceled |
072 | E | Table is already being processed |
073 | E | Can only be activated for a new table |
074 | E | The table is already specified as for manual repair |
075 | E | Language is not active or not available in the language list |
076 | E | This table is unknown |
077 | E | The table does not exist in the Dictionary, check it using SE11 |
078 | E | A hint cannot be applied to tables with a log |
079 | E | The table has no language key, operation canceled |
080 | E | Table has already been processed |
081 | E | &1 is still being processed. Cannot delete it from the worklist |
082 | E | Code page &1 is unknown |
083 | E | The combination (&1, &2) is not supported |
084 | E | Table &1 is not in the worklist with status &2. |
085 | E | The language &1 is not in the global language pool |
086 | E | Permitted language keys should not be in the exception list |
087 | E | The local language pool of this table is already being taken into account |
088 | E | This operation is only possible for tables with a local language pool |
089 | E | Tables with a local language pool cannot be repaired manually |
090 | E | It is already in use |
091 | E | The table is still being processed. Deletion not possible |
092 | E | The repair is being restarted |
093 | E | Obtain results from log |
094 | E | Table &1 is already locked by user &2 |
095 | E | No lock |
096 | E | Lock deleted |
097 | E | Lock belongs to user &1. Deletion not possible |
098 | E | Lock already in place |
099 | E | Lock necessary |
100 | E | User &1 (client &2) already has a lock. |
101 | E | Field &1 does not exist in table &2 |
102 | E | There are no batch servers in the system |
103 | E | Batch server &1 does not exist in the system |
104 | E | Dynamic select for &1 failed |
105 | E | Dynamic select with filter for &1 failed |
107 | E | Refresh the display |
108 | E | File cannot be opened |
109 | E | Hints saved |
110 | E | It is not a hint file |
111 | E | Hints imported |
112 | E | It is not a filter file |
113 | E | Filters imported |
114 | E | Filters exported |
115 | E | Input is not complete |
116 | E | The Wordlist contains errors. Check the Condition. |
117 | E | No errors found |
118 | E | Specify a code page |
119 | E | Code page not permitted |
120 | E | Read note 419006 |
121 | E | Support only in Unicode system |
122 | E | Problems with job find |
123 | E | Job already exists. Use a different suffix |
124 | E | Program successfully executed. |
125 | E | Problems during executing RADPOCNV. |
126 | E | Language could not be mapped to a code page. |
127 | E | Language vector is empty. Please check tables TCPDB/TCP0I with RSCPINST. |
128 | E | Only one line allowed. |
129 | E | No file name specified. |
130 | E | File &1 already exists. Please rename or delete file. |
131 | E | File &1 could not be opened for writing. |
132 | E | Error calling POPUP_GET_VALUES. |
133 | E | Error calling EXPORT TO DATASET. |
134 | E | File &1 could not be opened for reading. |
135 | E | Error calling IMPORT FROM DATASET. |
136 | E | Exported into file &1. |
137 | E | Successfully inserted. |
138 | E | Successfully inserted and updated. |
139 | E | Unallowed value for collision resolution. Allowed are M and O. |
140 | E | The valid range for the minimal word length is 1 to 30. |
141 | E | Separator type is empty ! Resetting to old value. |
142 | E | Wrong Fallback Code Page. |
143 | E | Saved. |
144 | E | Repair hints cannot be executed in the pre analysis. |
145 | E | Unallowed value for checkpoint mode. Select Active (A) or Inactive (O). |
146 | E | Table &1 does not exist. |
147 | E | No Nametab entry for table '&1'. |
148 | E | Table field has not the data type LANG (&1). |
149 | E | Table Category &1 unknown. |
150 | E | Default Code Page &1 not allowed. |
151 | E | Value length &1 exceeds field length &2. |
152 | E | Fallback Code Page &1 not allowed. |
153 | E | Insert failed with &1. |
154 | E | BIDI Analysis is activated. Deactivate MDMP. |
155 | E | After running Analysis it is not possible to switch Analysis Type. |
156 | E | Conversion cannot be started. |
157 | E | '&1' already exists. |
158 | E | Codepage setting looks wrong. Please check TCPDB and TCP0D. |
159 | E | It is not allowed to set a default codepage for table category '1'. |
160 | E | Language field name must be specified for table category '1'. |
161 | E | ACPR must be '0' for table category '1'. |
162 | E | It is not allowed to set a language field name for table category '2'. |
163 | E | An entry already exists for table &1. |
164 | E | Vocabulary Existence must be either 0 or 2. |
165 | E | Default codepage must be set to 1100 for table category '3'. |
166 | E | It is not allowed to set a default codepage for table category '2'. |
167 | E | It is not allowed to set a language field name for table category '3'. |
168 | E | ACPR must be '0' for table category '3'. |
169 | E | Skip-flag should be set for table category '3'. |
170 | E | Skip-flag should not be set for table category '1'. |
171 | E | Skip-flag should not be set for table category '2'. |
172 | E | Cannot add language &1. Delete first from language list. |
173 | E | Cannot add language &1. Delete first from ambiguous language list. |
174 | E | File encoding needs to be UTF-8 |
175 | E | SET LOCALE failed! |
176 | E | Language &1 is not active and hence not allowed for language assignment! |
177 | E | Not able to repair the source yet |
178 | E | No Reprocess Log exists yet for report source or dynpro source |
179 | E | Wrong Separator Type: Allowed values are A (0x00-0x3F), B(0x20-0x3F), C |
180 | E | Batch Jobs are running. Please wait until they are finished. |
181 | E | No initial records found for the table cluster. |
182 | E | Table cluster has not yet been checked. Please run the Consistency Check. |
183 | E | |
184 | E | |
185 | E | No MDS Log is available for this table |
186 | E | No entry is in R3load Log for this table |
187 | E | No MDS tables found. |
188 | E | A R3load Log file cannot be opened, check log |
189 | E | R3load Log files have been loaded to DB |
190 | E | XML transformation failed for &1 |
191 | E | Table cannot be inserted and the table may be already in table UMGTSKQ |
192 | E | Some table(s) may not exsit in table DD02L, so cannot be inserted |
193 | E | Table does not exist |
194 | E | Database table does not exist |
195 | E | No detail for this source |
196 | E | Index tables have been inserted successfully |
197 | E | Setting codepage to Index table failed |
198 | E | Cl_Repair_util cannot be created |
199 | E | Conversion failed in cl_repair_util |
200 | E | The cond id is already used.If it isn't here,it is used for other usages. |
201 | E | The file containing R3load Log filenames(*.xml) cannot be opened |
202 | E | The conversion obj(UTF8 to sys) cannot be created |
203 | E | Conversion from Hex to String failed. |
204 | E | Worklist has been deleted |
205 | E | Worklist cannot be deleted |
206 | E | Wordlist ID for the table exists already |
207 | E | No rows have been changed |
208 | E | Fix index part of this table first, and it is in manual repair still |
209 | E | Select a line or lines |
210 | E | Please input valid number |
211 | E | No index tables have problems |
212 | E | Not all index tables in UMGINDX have been inserted to Worklist |
213 | E | Not all sources in R3load Log have been inserted to Worklist |
214 | E | Please load R3load Logs first |
215 | E | No Reprocess Log exists for manually added source |
216 | E | Unexpected scan level found ! |
217 | E | |
218 | E | Fallback Code Page &1 not allowed. |
219 | E | Table &1 already exists in the exception list. |
220 | E | Condition does not exist. |
221 | E | Enter a Wordlist ID |
222 | E | Enter a Condition ID |
223 | E | Condition is still used by a Wordlist. |
224 | E | Cannot show the source |
225 | E | Language cannot be deleted because Common Character Set will change ! |
226 | E | Hint ID already exists, please choose another Hint ID |
227 | E | Hint has been executed,pls do not reexecute hints |
228 | E | No such method exists |
229 | E | Please specify a method |
230 | E | You cannot edit the Lang. Lists after the Ambiguous Lang. Scan started |
231 | E | You cannot delete the language. It is used in the vocabulary. |
232 | E | Please select a table cluster from the tree |
233 | E | Select a table cluster or double click on a node |
234 | E | Initial Records were deleted from table cluster |
235 | E | |
236 | E | |
237 | E | SPUMG conversion history is saved. |
238 | E | Please run report UMG_HISTORY first and save the conversion history. |
239 | E | Please select an entry from the list 'Unicode Conversion History'. |
240 | E | Error in the File Save Dialog (&1) |
241 | E | Please use the file extension 'voc'. |
242 | E | Wrong filename. |
243 | E | Error in the File Open Dialog (&1) |
244 | E | Error while uploading file &1. |
245 | E | Upload of vocabulary finished. |
246 | E | Error while downloading file &1. |
247 | E | Download of vocabulary finished. |
248 | E | Upload of character statistics finished |
249 | E | Please select a table pool from the tree |
250 | E | Select a table pool or double click on a node |
251 | E | Invalid Records were deleted from table pool |
252 | E | No inivalid records found for this pool |
253 | E | Please check the table pool first |
254 | E | Language Lists already initialized. |
255 | E | Upload of hints finished. |
256 | E | Download finished. |
257 | E | UMG_POOL_TABLE was executed already. |
258 | E | SAP entries cannot be modified. |
259 | E | Please enter a class name. |
260 | E | Transport not created. |
261 | E | Please enter a path. |
262 | E | This report should be used only for test purposes |
263 | E | |
264 | E | Common Character Set is empty ! Resetting to old value. |
265 | E | Collision Resolution is empty ! Resetting to old value. |
266 | E | R3trans language codepage is empty ! Resetting to old value. |
267 | E | The valid range for the checkpoint frequency is 2000000 to 2147483647). |
268 | E | Table TCPDB is empty. Please configure your system with RSCPINST. |
269 | E | Table is still in process. Please wait until the scan has finished. |
270 | E | The new status can be only N, M or C. |
271 | E | Only the status N,M or S can be changed. |
272 | E | The status for this type of table cannot be changed |
273 | E | It is not possble to retrieve language list because no history exists. |
274 | E | The language list is retrieved successfully from umghistory. |
275 | E | The language list exists, and please edit in transaction SPUMG. |
276 | E | Export flag for INDX type tables is empty ! Resetting to old value. |
277 | E | |
278 | E | RADCUCNT is running already. |
279 | E | Log of RADCUCNT is empty. |
280 | E | Problem when calling 'WRITE_LIST'. |
281 | E | Table TCP0I is empty. Please configure your system with RSCPINST. |
282 | E | Error: Global fallback code page is set to 6100, 6200, 6500. |
283 | E | Maybe the job is aborted by other programs like SM37 or system shutdown. |
284 | E | Please mark a report in the tree. |
285 | E | The last active language cannot be deleted. |
286 | E | Please select the field 'Message'. |
287 | E | The class &1 exists already. |
288 | E | Reference type must be 'D', 'E', 'I', 'J', 'K', 'L' or 'R'. |
289 | E | Please enter a table name. |
290 | E | Error log type must be 'N', 'I', 'W' or 'E'. |
291 | E | Structure reference must be empty for reference type 'D'. |
292 | E | Structure must be empty for reference type 'I'. |
293 | E | Container field, structure reference and error log type must be empty. |
294 | E | The field &1 does not exist in table &2. |
295 | E | The structure &1 has fields which are not character like. |
296 | E | The structure &1 is not flat. |
297 | E | The structure &1 is longer than the container field &2. |
298 | E | Position of field &1 > Position of reference field &2. |
299 | E | You have to enter a structure for reference type 'D'. |
300 | E | You have to enter a structure reference for reference type 'I'. |
301 | E | Language SPACE cannot be deleted from the Ambiguous Language List. |
302 | E | Some tables exist in the Default Exception List already. |
303 | E | Please mark table cluster in the Tree Control. |
304 | E | Words deleted from external vocabulary. |
305 | E | Code page 6301 is not available in your system. |
306 | E | Please make sure code page &1 is installed correctly in the system. |
307 | E | Please use the file extension 'twi'. |
308 | E | Record deleted. |
309 | E | Error when getting path. (SY-SUBRC - &1). |
310 | E | No tables found in the worklist of the Reprocess. |
311 | E | Background job was scheduled already. Please check status in TA SM37. |
312 | E | A background job for the additional preparation steps was started. |
313 | E | Cannot open browser (sy-subrc - &1). |
314 | E | Problem during call to 'POPUP_TO_CONFIRM'. Canceling action. |
315 | E | Please make sure that the database statistics are up-to-date (TA DB02). |
316 | E | The language 'U+0000' cannot be inserted into the SPUMG Language List. |
317 | E | Variant with name &1 does not exist |
318 | E | Upload of exceptions successfully finished. |
319 | E | Please update the SPUMG exception tables first. |
320 | E | Please run the 'Additional Preparation Steps' first. |
321 | E | File &1 does not comply the XML standard. |
322 | E | Table &1 is not INDX like. |
323 | E | All reports are available. |
324 | E | Warning: SPUMG scan jobs are running. |
325 | E | You do not have authorization for this action (see long text). |
326 | E | An error occured, please check the Main Log. |
327 | E | You are not authorized to work with table &1. |
328 | E | Please select a batch server. |
329 | E | Please select a target language. |
330 | E | Only one line allowed. Multiple hint execution via transaction SUMG |
331 | E | Repair Hint &1 does not exist. |
332 | E | Unkown object type (Name: &1, Type:&2, Form:&3) |
333 | E | Package exist already. Please choose another name. |
334 | E | Please specify user names. |
335 | E | Please specify a package name. |
336 | E | Package &1 does not have the status 'U' (Users assigned) |
337 | E | Package &1 has the status 'Finished'. It will not be assigned. |
338 | E | Background job was scheduled already. Please check status in TA SM37. |
339 | E | Number of standard packages must be between 1 and 99. |
340 | E | Package &1 is closed for maintenance. No further changes possible. |
341 | E | Package &1 does not have the status 'C' (Closed). |
342 | E | Package &1 has the status 'R' (Released). Deletion not possible. |
343 | E | Modification of split conditions currently not possible. |
344 | E | Table was not processed in the Consistency Check. |
345 | E | Table does not exist. |
346 | E | Action canceled. Split conditions are currently modified. |
347 | E | The table has the status 'In Process' or 'Error'. |
348 | E | The table has already been inserted. |
349 | E | The table has been inserted into the exception list. |
350 | E | The table name is too long (number of characters >26) |
351 | E | Table &1 is currently processed. It will not be reset. |
352 | E | Please mark a table in the tree. |
353 | E | Upload of conditions finished. |
354 | E | Conditions cannot be deleted. Table splitting is released for &1. |
355 | E | Table &1 has the status 'S'. It will not be reset. |
356 | E | Table splitting was released already. |
357 | E | Table splitting was not released yet for table &1. |
358 | E | Modifications not possible. Table splitting was released already. |
359 | E | Table &1 cannot be reset because it is split up in packages. |
360 | E | Table &1 cannot be added to the exception list. |
361 | E | No Reprocess/INDX Log stored for table &1 (see long text). |
362 | E | Syntax Error in SQL condition (Scanlevel-&1, Number-&2, &3) |
363 | E | Release not possible. Conditions have SQL syntax errors. |
364 | E | The table is not yet scanned completely. |
365 | E | No syntax errors found. |
366 | E | Table splitting released for table &1. |
367 | E | Table splitting reset for table &1. |
368 | E | Language &1 does not exist in T002. |
369 | E | Language &1 is not in the list of allowed languages. |
370 | E | Reset/Restart not possible. Worker jobs are running. |
371 | E | Exception List was not uploaded correctly. |
372 | E | Selection restricted to &1 hits. |
373 | E | The language '?' cannot be inserted into the SPUMG Language List. |
374 | E | The reports must not run in non Unicode systems. |
375 | E | The menu 'Cluster Information' is not relevant anymore (see long text) |
376 | E | Release not possible. No information in Export Control Table. |
377 | E | The IUUC mode is switched off. |
378 | E | The SPUMG Language List is empty. |
379 | E | There are no active code pages in the SPUMG Language List. |
380 | E | No dictionary information available for structure &1. |
381 | E | Conversion object could not be created (Source CP: &1 Target CP: &2). |
382 | E | Conversion object could not be created (Source: &1 Target: &2). |
383 | E | Target code page &1 is not supported. |
384 | E | The text &1 could not be converted to Unicode. |
385 | E | A binary field with content &1 could not be converted (data type &2) |
386 | E | No mapping for tables and structure found (return code &1). |
387 | E | Release not possible. No conditions have been defined yet. |
388 | E | User &1 is already maintaining the Reprocess/INDX Log of table &2. |
389 | E | Select a table first by double-clicking a table name. |
390 | E | Table Cluster &1 put on Exception List. Please read long text. |
391 | E | Could not reset the Converter Cache (CCC). Reason &1. (see long text). |
392 | E | Package name includes non ASCII characters. Package not created. |
393 | E | Valid range is 1 - 99. Package not created. |
394 | E | No special options found. |
395 | E | The standard option &1 must not be changed here. |
396 | E | Please specify an option. |
397 | E | The value &1 is not allowed for option &2. |
398 | E | Table TCPDB contains EBCDIC code pages. |
399 | E | No hints found for processing. |
400 | E | The report must not run in Unicode systems. |
401 | E | Syntax Error in SQL condition of &1 for table &2. Reason: &3. |
402 | E | The conversion obj(global fallback to sys) cannot be created |
403 | E | You need to have an exclusive lock to execute the report. |
404 | E | Negative number for parameter &1 is not allowed. |
405 | E | Upload not possible. Function modules are missing (&1/&2). |
406 | E | Report cannot be executed. Status of CU&&UC procedure cannot be found. |
407 | E | Report cannot be executed. Release info of CU&&UC procedure is wrong. |
408 | E | Report cannot be executed. Release info of CU&&UC procedure is wrong. |
409 | E | Transaction SPUMG is currently locked. Undefined status (see long text). |
410 | E | Transaction SPUMG is currently locked. Finish &1 first. |
411 | E | Unicode Conversion tables might contain corrupted entries (see long text) |
412 | E | SPUMG has been reset. Call transaction SPUMG again to start from scratch. |
413 | E | Transaction SPUMG is currently locked. Return code: &1 |
414 | E | Option &1 does not exist. |
415 | E | Table &1 excluded from scan. (Read long text). |
416 | E | Selection includes a user-specific table. Read long text. |