Sind Sie neu in der SAP-Welt und möchten schnell mitreden? Mit diesem Buch finden Sie sich erfolgreich im SAP-Umfeld zurecht! Sie steigen direkt in die Konzepte und Technologien der SAP-Software ein und lernen die unterschiedlichen Systeme und Prozesse kennen. Schritt für Schritt zeigen die Autoren Ihnen die wichtigsten technischen Aufgaben und die Zusammenhänge zwischen den Objekten. Dank der vielen Beispiele und Abbildungen finden Sie sich schnell im SAP-Umfeld zurecht und können direkt in SAP ERP oder SAP S/4HANA anfangen.
Bei amazon.de ansehen →The Message Class GU (FI-SL-Hilfsmittel) is a standard Message Class in SAP ERP and is part of the package GBAS.
Message Class | GU |
Short Text | FI-SL-Hilfsmittel |
Package | GBAS |
ID | Language | Text |
---|---|---|
000 | D | |
001 | D | Es wurden keine zur Maske passenden Felder gefunden |
003 | D | Es wurde kein passendes Objekt gefunden |
004 | D | Es wurde kein Objekt selektiert |
005 | D | Bitte einen der angegebenen Feldnamen wählen |
006 | D | Diese Funktion ist vorhanden |
010 | D | Der Anfang der Seite wurde erreicht |
011 | D | Das Ende der Seite wurde erreicht |
012 | D | Der Sekundärindex für diese Funktion ist nicht definiert (&) |
016 | D | & & & & |
017 | D | Die Summen stimmen überein |
020 | D | Die Tabelle & ist im Selektionsprogramm noch nicht vorgesehen |
028 | D | Beginn der Initialisierung der Konzernwährungsfelder der GLT0 |
029 | D | Ende der Initialisierung der Konzernwährungsfelder der GLT0 |
030 | D | Fehler bei der Initialisierung der Konzernwährungsfelder |
031 | D | Umsetzung Tabelle & : Vorgang & konnte nicht geändert/hinzugefügt werden |
032 | D | Umsetzung Tabelle & : Fehler beim Löschen einer Tabellenzeile |
033 | D | Umsetzung Tabelle & : Fehler beim Einfügen einer Tabellenzeile |
034 | D | Umsetzung Tabelle & : Fehler beim Ändern einer Tabellenzeile |
035 | D | Umsetzung aller Tabellen erfolgreich durchgeführt |
036 | D | Generierung Spezielle Ledger abgeschlossen |
037 | D | Sperrobjekt für Tabelle & konnte nicht in T800A aufgenommen werden |
038 | D | Sperrobjekt für Tabelle & wurde in T800A aufgenommen |
039 | D | Alle Sperrobjekte waren bereits in Tabelle T800A gepflegt --> OK! |
040 | D | Exitprogramm & fehlt |
041 | D | Includes mit Summen- und EP-Tabellen erfolgreich generiert |
042 | D | Allg. Selektionsroutinen für GD13, GD23, Allocations generiert |
043 | D | Selektionsroutinen für die Stammdaten generiert |
044 | D | Routinen für die Durchbuchung ins FI-SL generiert |
045 | D | Coding für variable Feldübertragungen generiert |
046 | D | Coding für feste Feldübertragungen generiert |
047 | D | Coding für Validations-Tabellen generiert |
048 | D | Coding für Saldovortrag generiert |
049 | D | Coding für das Customizing generiert |
050 | D | Coding für die Währungsumrechnung generiert |
051 | D | Verbuchungsroutinen und feste Feldübertragungen für Rollups generiert |
052 | D | Datenbankschnittstelle SAPFGPLN für die Planung generiert |
053 | D | Verbuchungsfunktionsbausteine für die Planung generiert |
054 | D | Verbuchungsroutinen für Allocations generiert |
055 | D | Transformationsbausteine für Allokation und Rollup generiert |
056 | D | Coding und Tabelleneinträge für die Archivierung generiert |
057 | D | Mt &: Vorgang & wurde dem Ledger & zugeordnet |
058 | D | Mt &: Vorgang & wurde dem Ledger & und BUKRS & zugeordnet |
059 | D | Mt &: Vorgang & wurde dem Ledger & und Gesell. & zugeordnet |
060 | D | Mt &: Zuordnung Vorgang &, Ledger & gelöscht |
061 | D | Mt &: Zuordnung Vorgang &, Ledger &, BUKRS & gelöscht |
062 | D | Mt &: Zuordnung Vorgang &, Ledger &, Gesell. & gelöscht |
063 | D | Umsetzen der MM-Vorgänge: RMML, RMBA und RMBE gehen nicht ins FI-SL |
064 | D | Umsetzung der MM-Vorgänge erfolgreich beendet |
065 | D | Umsetzung der MM-Vorgänge fehlerhaft beendet |
066 | D | Fehler Insert T886A: Mt & Vorgang & Ledger & |
067 | D | Fehler Insert T886B: Mt & Vorgang & Ledger & BUKRS & |
068 | D | Fehler Insert T886C: Mt & Vorgang & Ledger & Gesell. & |
069 | D | Rahmenprogramme für Validierung/Substitution generiert |
070 | D | Das Programm RGUDBANA zur Analyse der Tabelleninhalte wurde generiert |
071 | D | Beginn der Ergänzung von Ledgertabellen umd Währung und Währungstyp |
072 | D | Mandant &: Für Ledger & existiert die Tabelle & nicht |
073 | D | Fehler beim Schreiben der Ledgertabelle - Umsetzung nochmals starten |
074 | D | Mandant &: Der Buchungskreis & wurde nicht gefunden (Ledger &) |
075 | D | Mandant &: Die Gesellschaft & wurde nicht gefunden (Ledger &) |
076 | D | Fehler beim Schreiben der Zuordnungen - Umsetzung nochmals starten |
077 | D | Mandant &: Das Ledger & wurde nicht gefunden |
078 | D | Interner Fehler - Umsetzung wiederholen (Mt &, Ld &, CT &) |
079 | D | Include-Programm RGCATT01 für CATT-Abläufe wurde generiert |
080 | D | Export- und Importprogramme für FI-SL-Verteilung (ALE) wurden generiert |
081 | D | Ende der Ergänzung von Ledgertabellen umd Währung und Währungstyp |
082 | D | Neuzuordnung der MM-Vorgänge RMRU und RMWQ, wenn Ledger RMWA bereits hat |
083 | D | Coding für Recherche wurde generiert |
084 | D | Tabelle & ist keine FI-SL-Summentabelle (vom Typ TT in T800a) |
085 | D | Tabelle & existiert nicht in T800a oder ist keine FI-SL-Tabelle |
086 | D | Index & zu Tabelle & nicht gefunden |
087 | D | Bitte eine Indexkennung angeben. |
088 | D | Selektionsroutinen für Löschreport RGUDEL00 generiert |
089 | D | Umsetzung für Tabelle T889T auf T889TE beendet |
090 | D | Include-Programme für Substitution und Validation wurden generiert |
091 | D | Include-Programme für Stornierung von FI-SL-Belegen wurden generiert |
092 | D | Include-Programme für Pflege Kontierungskombinationen wurden generiert |
093 | D | Anwendung FI-SL, Mandant &, XPRA & -> Bitte Langtext lesen |
094 | D | Include-Programme für Recherche wurden generiert |
095 | D | Programme für Summensatzanzeige generiert |
096 | D | Programme für Einzelposten Bericht/Bericht-Schnittstelle generiert |
097 | D | Währungseinstellungen für Flexibles Hauptbuch angepaßt |
098 | D | Coding generiert nach Transport von Flexiblem Hauptbuch |
100 | D | |
101 | D | Unterformel & nicht in Tabelle 890 (--> &) |
102 | D | Feld & & existiert nicht (--> &) |
103 | D | Fehlendes Datensegment & (--> &) |
104 | D | Unterformel & wird rekursiv benutzt |
105 | D | Fehlender Operand (Pos.& --> &) |
106 | D | Fehlender Operator (Pos.& --> &) |
107 | D | Fehlende '(' (Pos.& --> &) |
108 | D | Leere Klammern (Pos.& --> &) |
109 | D | Syntaxfehler in Segmentdefinition (Pos.& --> &) |
110 | D | Setname ist zu lang (Pos.& --> &) |
111 | D | Fehlende ')' (Pos.& --> &) |
112 | D | Feldname ist zu lang (Pos.& --> &) |
113 | D | Fehlendes '=' (Pos.& --> &) |
114 | D | Falsche Werteingabe (Pos.& --> &) |
115 | D | Interner Fehler im Unterprogramm & |
116 | D | Set & ist keiner Tabelle zugeordnet (--> &) |
117 | D | Feld & ist keiner Tabelle zugeordnet (--> &) |
118 | D | Set & zur Tabelle & existiert nicht (--> &) |
119 | D | Im Feldnamen fehlt ein '&' |
120 | D | Der Tabellenname & ist zu lang |
121 | D | Fehlende '&' |
140 | D | |
141 | D | Das Feld & ist nicht vorhanden |
142 | D | Die Tabelle & existiert nicht |
143 | D | Die Tabelle & hat keine Sendertabelle |
144 | D | Kopfdaten für Index & nicht gefunden |
145 | D | Die Domäne & existiert nicht |
160 | D | **************Nachrichten für Verteilung (IDOCs)************************ |
161 | D | Der Nachrichtentyp & ist nicht gültig |
162 | D | Segmente des Zwischendokuments & in falscher Reihenfolge |
163 | D | Ledger & darf nicht bebucht werden |
164 | D | Buchungskreis & ist nicht vorhanden |
165 | D | Gesellschaft & ist nicht vorhanden |
166 | D | Weder Buchungskreis noch Gesellschaft gefüllt |
167 | D | Kombination Ledger & Buchungskreis & kann nicht bebucht werden |
168 | D | Kombination Ledger & Gesellschaft & kann nicht bebucht werden |
169 | D | Alle Sätze wurden ordnungsgemäß verbucht |
170 | D | Interner Fehler beim Versenden des IDOC aufgetreten |
171 | D | Tabelle & ist keine aktive FI-SL-Summentabelle |
172 | D | Es sind bereits Einträge in EDIMAP für Tabelle & vorhanden |
173 | D | Es sind keine Einträge in EDIMAP für Tabelle & vorhanden |
174 | D | Der Nachrichtentyp & kann nicht verarbeitet werden |
175 | D | Die Zwischenstruktur & kann nicht verarbeitet werden |
176 | D | Vorsicht beim Aktualisieren der Zuordnungstabelle -> Bitte Langtext lesen |
177 | D | Einträge in der Zuordnungstabelle EDIMAP wurden aktualisiert |
178 | D | Export- und Importprogramme für Tabelle & wurden generiert |
179 | D | Verteilungseinstellungen für Tabelle & wurden zurückgesetzt |
180 | D | Keine Verteilung der Tabelle & möglich |
181 | D | Fehler bei der ISO-CODE-Konvertierung von & |
182 | D | Es ist ein Fehler bei der Konvertierung der Währung & aufgetreten |
200 | D | |
201 | D | Für Gesellschaft & kein Stammsatz gepflegt |
202 | D | Argument & nicht in Tabelle & |
203 | D | Für Ledger & kein Stammsatz gepflegt |
204 | D | Bitte Kursart für Referenz-Kurs eingeben |
205 | D | Fehler bei der Bestimmung des Währungsschlüssels der Gesellschaft & |
206 | D | Periodenangabe ist nicht numerisch |
207 | D | Der dem Ledger zugeordnete Währungstyp & ist nicht korrekt. |
208 | D | Bitte Periode kleiner als 999 eingeben |
209 | D | Für Buchungskreis & kein Stammsatz gepflegt |
210 | D | Gesellschaft & wurde in Konzernwährung erfasst |
211 | D | Fehler bei der Bestimmung des Währungsschlüssels des Buchungskreises & |
212 | D | Für Gesellschaft & existiert keine Umrechnungsgruppe |
213 | D | Für Buchungskreis & existiert keine Umrechnungsmethode. |
214 | D | Nur Listarten 1-3 und 9 erlaubt |
215 | D | Version & ist nicht dem Ledger & zugeordnet |
216 | D | Keine Stammdaten gefunden & & |
217 | D | Das Schlüsselfeld & fehlt in der Datenbank & |
218 | D | & &/&/&: Ist-Buchung nicht möglich |
219 | D | Eines der drei Felder & ,& oder & muß Schlüssel in der Datenbank & sein |
220 | D | & &/&/&: Planung nicht möglich |
221 | D | Die Versionen des Ledgers & sind nicht korrekt definiert |
222 | D | Summentabelle & wurde nicht richtig definiert (vgl. Ledger &). |
223 | D | Bitte Referenz-Kursart '*' in den Speziellen Ledgern verwenden |
230 | D | |
250 | D | |
251 | D | Ledger & führt keine Transaktionswährung |
252 | D | Ledger & führt keine Hauswährung |
253 | D | Bitte geben Sie ein lokales Ledger ein |
254 | D | Bitte geben Sie eine gültige Version ein |
255 | D | Bitte geben Sie ein gültiges Geschäftsjahr ein |
256 | D | Vergleich nur mit Soll/Haben-Kennzeichen = BLANK möglich |
257 | D | Die Bis-Periode muß größer als die Von-Periode sein |
258 | D | Es werden maximal 16 Perioden unterstützt |
259 | D | Bitte eine andere Zeile auswählen |
260 | D | Bitte ein gültiges Soll/Haben-Kennzeichen eingeben |
261 | D | Ledger 0 führt Währung &, Ledger & aber Währung & |
262 | D | Es traten Differenzen in der Hauswährung auf |
263 | D | Es traten keine Differenzen in der Hauswährung auf |
264 | D | Es traten Differenzen in der Transaktionswährung auf |
265 | D | Es traten keine Differenzen in der Transaktionswährung auf |
266 | D | Bitte wählen Sie mindestens eine Kennzahl aus |
267 | D | Keine Daten in Ledger & zu den Selektionskriterien vorhanden |
268 | D | Keine Daten in beiden Ledgern zu den Selektionskriterien vorhanden |
269 | D | Es wurden Differenzen in der & festgestellt |
270 | D | Beim Vergleich wurden keine Differenzen festgestellt |
271 | D | Bitte geben Sie ein Verrechnungskonto ein |
272 | D | Währungsdifferenzen werden ausgeglichen -> Bitte Langtext lesen! |
273 | D | Überlappende Perioden -> keine korrekte Periodenanzeige möglich |
274 | D | Ledgervergleich für Tabelle & nicht möglich |
275 | D | Kein Vergleich möglich, da Ledger & den Kontenplan & führt |
276 | D | Kein Ausgleich bei dieser Konstellation möglich |
277 | D | Bitte aktivieren Sie das Kennzeichen 'Währungen anzeigen' |
278 | D | Das Kennzeichen 'Differenzen ausgleichen' wird im Dialog ignoriert |
279 | D | Bitte geben Sie einen Währungstypen zur Erstanzeige an |
280 | D | Kein Ausgleich notwendig, da keine Differenzen aufgetreten sind |
281 | D | Kein vollständiger Ausgleich möglich, da Sätze mit Betrag 0 vorhanden |
282 | D | Keine Ausgleichsbuchung auf Konto & möglich |
283 | D | Überlappende Perioden für Buchungskreis & (Varianten & und & ) |
284 | D | Ausgleichsbeleg & wurde gebucht |
285 | D | Beim Vergleich traten Nachrichten auf -> Bitte Nachrichten überprüfen |
286 | D | Überlappende Perioden für Gesellschaft & (Varianten & und & ) |
287 | D | Einige Konten haben kein Konzern- bzw. alternatives Konto zugeordnet |
288 | D | Keine Berechtigung für Ledger &, Satzart &, Version &, Bukrs & |
289 | D | Keine Berechtigung für Ledger &, Satzart &, Vers. &, Gesell. & |
290 | D | Sie haben keine Berechtigung zum Ausgleichen von Differenzen |
291 | D | Geschäftsbereichskonsolidierungsledger - Bitte Langtext lesen! |
292 | D | Vergleich unterschiedlicher Kontenpläne - Bitte Langtext lesen! |
293 | D | In Bukrs/Gesellschaft &1 wird Währungstyp &2 mit &3 verglichen |
294 | D | Das Konto & ist im Buchungskreis & nicht angelegt |
295 | D | Konto & für Gesellschaft & nicht gültig -> Langtext |
296 | D | Bitte tragen Sie für Gesellschaft & einen Stammdatenbuchungskreis ein |
297 | D | Bitte geben Sie zuerst ein gültiges Ledger ein |
298 | D | Bitte wählen Sie eine gültige Spalte aus |
299 | D | Detailanzeige nur für Tabellen gleichen Typs unterstützt |
300 | D | Detailanzeige nur bei Verwendung des gleichen Kontenplans möglich |
301 | D | Objekte mit führender Ziffer dürfen nicht angelegt werden |
302 | D | Objekte mit führender Null dürfen nicht geändert werden |
303 | D | Objekte mit führender Null dürfen nicht gelöscht werden |
304 | D | Sie ändern ein Objekt im SAP-Namensraum |
305 | D | Keine gültigen Ledger/Buchungskreis/Gesellschaftskombinationen gefunden |
306 | D | Auf das Ledger & dürfen keine Ausgleichsbuchungen gemacht werden |
307 | D | Bitte geben Sie nur 'feste' Ledger der Tabelle GLT0 ein |
308 | D | Der Transactionscode & wird nicht unterstützt |
309 | D | |
310 | D | Keine Berechtigung zum Anlegen von Standardlayouts |
311 | D | Keine Berechtigung zum Anlegen dieses Standardlayouts |
312 | D | Keine Berechtigung zum Ändern von Standardlayouts |
313 | D | Keine Berechtigung zum Ändern dieses Standardlayouts |
314 | D | Keine Berechtigung zum Anzeigen von Standardlayouts |
315 | D | Keine Berechtigung zum Anzeigen dieses Standardlayouts |
316 | D | Keine Berechtigung zum Löschen von Standardlayouts |
317 | D | Keine Berechtigung zum Löschen dieses Standardlayouts |
320 | D | Keine Berechtigung zum Anlegen von Bibliotheken |
321 | D | Keine Berechtigung zum Anlegen dieser Bibliothek |
322 | D | Keine Berechtigung zum Ändern von Bibliotheken |
323 | D | Keine Berechtigung zum Ändern dieser Bibliothek |
324 | D | Keine Berechtigung zum Anzeigen von Bibliotheken |
325 | D | Keine Berechtigung zum Anzeigen dieser Bibliothek |
326 | D | Keine Berechtigung zum Löschen von Bibliotheken |
327 | D | Keine Berechtigung zum Löschen dieser Bibliothek |
330 | D | Keine Berechtigung zum Anlegen von Berichten |
331 | D | Keine Berechtigung zum Anlegen dieses Berichts |
332 | D | Keine Berechtigung zum Ändern von Berichten |
333 | D | Keine Berechtigung zum Ändern dieses Berichts |
334 | D | Keine Berechtigung zum Anzeigen von Berichten |
335 | D | Keine Berechtigung zum Anzeigen dieses Berichts |
336 | D | Keine Berechtigung zum Löschen von Berichten |
337 | D | Keine Berechtigung zum Löschen dieses Berichts |
340 | D | Keine Berechtigung zum Anlegen von Parallelberichten |
341 | D | Keine Berechtigung zum Anlegen dieses Parallelberichts |
342 | D | Keine Berechtigung zum Ändern von Parallelberichten |
343 | D | Keine Berechtigung zum Ändern dieses Parallelberichts |
344 | D | Keine Berechtigung zum Anzeigen von Parallelberichten |
345 | D | Keine Berechtigung zum Anzeigen dieses Parallelberichts |
346 | D | Keine Berechtigung zum Löschen von Parallelberichten |
347 | D | Keine Berechtigung zum Löschen dieses Parallelberichts |
350 | D | Keine Berechtigung zum Anlegen von Berichtsgruppen |
351 | D | Keine Berechtigung zum Anlegen dieser Berichtsgruppe |
352 | D | Keine Berechtigung zum Ändern von Berichtsgruppen |
353 | D | Keine Berechtigung zum Ändern dieser Berichtsgruppe |
354 | D | Keine Berechtigung zum Anzeigen von Berichtsgruppen |
355 | D | Keine Berechtigung zum Anzeigen dieser Berichtsgruppe |
356 | D | Keine Berechtigung zum Löschen von Berichtsgruppen |
357 | D | Keine Berechtigung zum Löschen dieser Berichtsgruppe |
358 | D | Keine Berechtigung zum Generieren dieser Berichtsgruppe |
360 | D | Zur Pflege der Berechtigungsgruppen wurde ein neuer Modus gestartet |
361 | D | Sie ändern ein von den flexiblen Analysen generiertes Objekt |
362 | D | Verwenden Sie keine von den flexiblen Analysen generierte Objekte |
390 | D | |
391 | D | Fehler beim Zuordnen der Selektionsdynpros zu den Summentabellen |
392 | D | Bitte generieren Sie zunächst den Report & mit Hilfe von & |
393 | D | Für die simulierte Beleganzeige kann ALV Grid nicht verwendet werden. |
400 | D | |
405 | D | Bitte einen numerischen Wert eingeben |
406 | D | Bitte Datum in anderem Format eingeben |
407 | D | Bitte existierendes Datum eingeben |
408 | D | Bitte Zeit in anderem Format eingeben |
409 | D | Bitte existierende Zeitangabe eingeben |
410 | D | Wert nicht konvertierbar |
411 | D | Eingabefeld ist nicht im richtigen Format |
412 | D | Typ & des Quell- und & des Zielfeldes passen nicht zusammen |
444 | D | Es wurden keine Informationen gefunden |
445 | D | Ledger & ist kein abhängiges Ledger -> Funktion nicht möglich |
446 | D | Ledger & ist ein abhängiges Ledger -> Funktion nicht möglich |
470 | D | Fehler beim Ändern Tabelle &, Vorgang & |
471 | D | Fehler beim Löschen in Tabelle & |
472 | D | Fehler beim Schreiben in Tabelle & |
473 | D | Fehler beim Ändern Tabelle &, Feldübertragung & |
500 | D | ************ Funktionsgruppe GUPD **************************** |
501 | D | Periode & im Gsjr & ist nicht zum Buchen eröffnet |
502 | D | Bitte ordnen Sie Ledger & dem Buchungskreis & zu |
503 | D | Bitte ordnen Sie Ledger & der Gesellschaft & zu |
504 | D | Bitte legen Sie die Geschäftsjahresvariante & an |
505 | D | Bitte pflegen Sie die Gsjr-Variante & zum & |
506 | D | Buchungsperiode & ist für Gsjr-Variante & nicht definiert im Gsjr & |
507 | D | Keine Berechtigung für Periode & im Jahr & |
508 | D | Zur Geschäftsjahrevariante & Jahr & wurden keine Perioden gefunden |
509 | D | ********** Umsetzung EURO ********************************* |
510 | D | Die Tabelle & hat einen Blockungsfaktor grösser als 16. |
511 | D | Das Ledger & existiert nicht. |
512 | D | Die Tabelle & ist nicht aktiv installiert |
513 | D | Die Tabelle & speichert weder zweite noch dritte Währung. |
514 | D | Perioden bitte nummerisch eingeben. |
515 | D | Bitte Bis-Periode größer oder gleich Von-Periode eingeben. |
516 | D | Das Feld & existiert nicht in Tabelle &. |
517 | D | Bitte Konto eingeben. |
518 | D | Die Tabelle & existiert nicht. |
519 | D | Es wurden keine Sätze gefunden. |
520 | D | Feld RACCT existiert nicht in Tabelle & |
521 | D | Alle Belege saldieren zu null! |
522 | D | Konto & im Buchungskreis & ist nicht erlaubt |
523 | D | Konto & in Gesellschaft & nicht erlaubt |
524 | D | Die Tabelle & wird nicht umgestellt (Pool-Tabelle, siehe Langtext) |
525 | D | Kein Text zu Ledger & in Sprache & gefunden |
535 | D | ********************************RGUSLSEP********************************* |
538 | D | Es wurden weder Summensätze noch Einzelposten selektiert |
539 | D | Das Feld & wird bereits in der Liste ausgegeben |
540 | D | Das Feld & ist nicht in der Tabelle & vorhanden |
541 | D | Keine Objektnummer-Inkonsistenzen für Tabelle & gefunden |
542 | D | & OBJNR-Inkonsistenzen für Tab. & gefunden, Details siehe Liste |
550 | D | *********************Nachrichten für CATT******************************** |
551 | D | Das Include-Programm RGCATT01 wurde erfolgreich generiert |
552 | D | Die Tabelle & existiert bereits im Repository |
553 | D | Die Tabelle & ist bereits im FI-SL installiert |
554 | D | Die Tabelle & ist nicht im FI-SL installiert |
555 | D | Die Tabelle & ist nicht im Repository angelegt |
556 | D | Die CATT-Abläufe dürfen im Mandanten & nicht gestartet werden |
557 | D | Neuanlage oder Installation nur mit 6-stelligem Tabellennamen möglich |
558 | D | Reporting kann im Moment nur für Tabelle & getestet werden |
559 | D | Der Name der Tabelle muß mit 'ZZ' beginnen |
560 | D | Das 6. Zeichen des Tabellennamens muß ein 'T' sein |
561 | D | Test Durchbuchung und Saldovortrag nur für lokale Tabellen möglich |
600 | D | |
601 | D | Für das Muss-Ledger 00 bitte Programm SAPF011 verwenden |
602 | D | Ledger & ist nicht vorgesehen |
603 | D | Für Ledger & ist kein Saldovortrag vorgesehen |
604 | D | Die dem Ledger & zugeordnete Tabelle & ist nicht vorgesehen |
605 | D | Die dem Ledger & zugeordnete Tabelle & hat Tab.-Typ & statt TT |
606 | D | Bitte für das lokale Ledger & einen Buchungskreis angeben |
607 | D | Bitte einen gültigen Buchungskreis angeben |
608 | D | Bitte für das globale Ledger & eine Gesellschaft angeben |
609 | D | Bitte eine gültige Gesellschaft angeben |
610 | D | Ledger & ist keinem der genannten Buchungskreise zugeordnet |
611 | D | Ledger & ist keiner der genannten Gesellschaften zugeordnet |
612 | D | Bitte geben Sie einen gültigen Satztyp an |
613 | D | Version & ist nicht definiert |
614 | D | Bitte geben Sie ein gültiges Geschäftsjahr an |
615 | D | Die dem Ledger & zugeordnete Tabelle & hat keine Programmgruppe |
616 | D | Dem Bukrs & ist kein Kontenplan zugeordnet |
617 | D | Gesellschaft &, Ledger & ist kein Kontenplan zugeordnet |
618 | D | Dem Bukrs &, Ledger & ist kein eigener Ktopl. zugeordnet |
619 | D | Dem operativen Ktopl. & ist kein Konzern-Ktopl. zugeordnet (Bukrs &) |
620 | D | Keine zu verarbeitenden Konten gefunden |
621 | D | Keine Änderungen durchzuführen |
622 | D | Saldovortrag auf Geschäftsjahr & erfolgreich durchgeführt |
623 | D | Saldovortrag erfolgreich mit Nachrichten durchgeführt |
624 | D | Dem Bukrs & ist kein Landeskontenplan zugeordnet |
625 | D | Dem Kontenplan & für Bukrs & ist kein Vortragskonto zugeordnet |
626 | D | Für Bukrs & , Ledger & fehlen Informationen - kein Saldovortrag |
627 | D | Für Gesnr & , Ledger & fehlen Informationen - kein Saldovortrag |
628 | D | Fehler beim Update VTRHJ in Bukrs/Gesnr &, Ledger & |
629 | D | Der Saldovortrag kann nicht ausgeführt werden -> Bitte Fehler beheben |
630 | D | Keine intervallweise Kontenverarbeitung für & & möglich |
631 | D | Das Ledger & kann mit dieser Transaktion nicht vorgetragen werden |
632 | D | Der Transaktionscode & wird nicht unterstützt |
633 | D | Bitte tragen Sie auch die parallelen Währungsledger vor |
634 | D | Bitte zuerst Zyklus & für Periode 000 in & stornieren |
650 | D | Beginn der Umsetzung von Customizingtabellen zu 30A |
651 | D | Beginn der Umsetzung der Tabelle & |
652 | D | Ende der Umsetzung von Tabelle & |
653 | D | Fehler bei der Umsetzung von Tabelle & |
654 | D | Ende der Umsetzung von Customizingtabellen zu 30A |
655 | D | Fehler bei Feldübertragung & & Sendertabelle & Feld & |
656 | D | Bei der Feldübertragung & & existiert ein Userexit zum Feld &. |
657 | D | Beginn der Änderung von FI-SL-Einzelposten (Hinzufügen Felder) |
658 | D | Ende der Änderung von FI-SL-Einzelposten (Hinzufügen Felder) |
659 | D | Einzelpostentabelle & wurde erfolgreich geändert |
660 | D | Beginn Neuerstellung GLU1 |
661 | D | Ende Neuerstellung GLU1 |
662 | D | Die Einzelpostentabelle & kann nicht erweitert werden |
663 | D | Beginn Neuerstellung GLU2 |
664 | D | Ende Neuerstellung GLU2 |
665 | D | Beginn der Umsetzung der Tabellen T80U und T80UT |
666 | D | Ende der Umsetzung der Tabellen T80U und T80UT |
667 | D | Kein Exit-Formpool eingetragen. |
668 | D | Beginn der Umsetzung des Views V_T001B_GL (FI-SL-Buchungsperioden) |
669 | D | Ende der Umsetzung des Views V_T001B_GL (FI-SL-Buchungsperioden) |
670 | D | Beginn der Umsetzung des Views V_T892U (Rollup-Substitution) |
671 | D | Ende der Umsetzung des Views V_T892U (Rollup-Substitution) |
672 | D | Bedingung in SUBACT & SEQNR & kann nicht umgesetzt werden |
673 | D | Fehler beim Schreiben eines Satzes in Tabelle & |
674 | D | Fehler beim Schreiben eines Satzes in Tabelle T892U |
675 | D | Falsche Syntax in SUBACT & SEQNR & -> keine Umsetzung möglich |
676 | D | Das Präfix 'RGUUMG' ist für generierte Reports der Umsetzung reserviert |
700 | D | ************ Stammdatenprüfung, Utilities ******************** |
701 | D | Der Buchungskreis & existiert nicht |
702 | D | Stammdatenpflege für Kombination & & nicht möglich (T800D) |
703 | D | Bitte ein größeres Bis-Datum eingeben |
704 | D | Die Tabelle ist nicht als Summentabelle in T800A |
705 | D | Sie haben gleiche Werte mit überlappendem Datum eingegeben |
706 | D | Eingabe überlappt mit existierenden Werten |
707 | D | Tabelle für das Feld & kann nicht gesperrt werden |
708 | D | Bitte ein Von-Datum eingeben |
709 | D | Fehler beim Bestimmen des übergeordneten Feldes |
710 | D | Sicherung erfolgreich durchgeführt |
711 | D | Keine Daten gefunden (Bitte Eingabe prüfen) |
712 | D | Eintrag nicht aktivierbar, da Überlappung mit aktiven Daten |
713 | D | Kombination ohne Feldname nicht möglich |
714 | D | Kombination ohne Tabelle nicht möglich |
715 | D | Tabelle & ist nicht vorgesehen |
716 | D | Die Gesellschaft & existiert nicht |
720 | D | Bitte Cursor auf gültige Zeile stellen |
721 | D | Fehler beim Lesen der internen Tabelle |
722 | D | Die Kombination ist zur Zeit von anderem Anwender gesperrt |
723 | D | Fehler beim Sperren |
724 | D | Bitte Cursor in gültige Zeile stellen |
725 | D | Bitte die Selektionswerte überprüfen |
726 | D | Fehlerhafte Tabellen, Stammdatentabelle & nicht verwendbar |
727 | D | Der Text des übergeordneten Feldes wurde nicht gefunden |
728 | D | Es wurde kein gültiger Userexit angegeben |
729 | D | Die Stammdatentabelle kann nur für lokale Felder verwendet werden |
730 | D | Keine Information zu Ledger & und Version & gefunden |
731 | D | Keine Textinformation zu Ledger & und Version & gefunden |
732 | D | Keine gültigen Versionen zu Ledger & gefunden |
735 | D | ************Pflege Objekttabellen + Verprobung Code Combinations******** |
736 | D | Sie haben keine Berechtigung zum Anzeigen von Kontierungskombinationen |
737 | D | Sie haben keine Berechtigung zum Pflegen von Kontierungskombinationen |
738 | D | Pflege Kontierungskombinationen für Tabelle & nicht möglich |
749 | D | Bitte Belegnummer eingeben |
751 | D | Bitte Cursor auf gültige Zeile stellen |
752 | D | Bitte Blockende markieren |
753 | D | Block markiert |
754 | D | Bitte Datum im richtigen Format eingeben. (s. Benutzerfestwerte!) |
755 | D | Tabelle & ist keine objekthaltige FI-SL-Summ.tabelle |
756 | D | Bitte nur Von-Bis-Werte ODER Sets eingeben |
757 | D | Bitte geeignetes Set eingeben (s.Langtext) |
758 | D | Pflege der KontierKomb. für Tab. & durch anderen Benutzer gesperrt |
759 | D | Sperre konnte nicht gesetzt werden (Systemfehler) |
760 | D | Bitte Bis-Wert größer als Von-Wert eingeben |
761 | D | Bitte markieren Sie Zeilen |
762 | D | KontierKombinationen wurden gesichert |
763 | D | Bitte Von-Bis-Werte bzw. Set ODER Initial-Wert setzen |
764 | D | Bitte Von-Bis-Werte bzw. Set angeben oder Initial-Wert-Flag setzen. |
765 | D | Ungültige KontierKombinationen (Tabelle &) |
766 | D | Es konnten keine gültigen Kombinationen gebildet werden |
767 | D | Kein Eintrag in Tabelle T800D für &-& |
768 | D | Bitte Jahr eingeben |
769 | D | Bitte Belegdatum eingeben |
770 | D | ******Fehlermeldungen Löschreport RGUDEL00 ****************************** |
771 | D | Die aufrufende Applikation kann nicht identifiziert werden |
772 | D | Die zur Tabelle & gehörenden Daten können nicht gelöscht werden |
773 | D | Die Bewegungsdaten des Ledgers & können nicht gelöscht werden |
774 | D | Die Bewegungsdaten des Ledgers & können nicht gelöscht werden |
775 | D | Interner Fehler |
776 | D | Bitte geben Sie zuerst ein Ledger ein |
777 | D | Die Von-Periode ist größer als die Bis-Periode |
778 | D | Die gesamten FI-SL-Bewegungsdaten können nicht gelöscht werden |
779 | D | Die Bewegungsdaten der Tabelle & können nicht gelöscht werden |
780 | D | Das Ledger & ist als produktiv gekennzeichnet |
781 | D | Das Ledger & ist nicht vorhanden. |
782 | D | Die Tabelle & ist nicht definiert. |
783 | D | Das Ledger & der Tabelle GLT0 kann nicht gelöscht werden. |
784 | D | Daten werden verlorengehen! Bitte Langtext lesen! |
785 | D | Die Eingabe ist nicht konsistent. |
786 | D | Die Tabelle & kann nicht gelöscht werden. |
787 | D | Die Eingabe & ist nicht vorgesehen. |
788 | D | Bitte übergeben Sie einen korrekten Buchungskreis |
789 | D | Bitte übergeben Sie ein Geschäftsjahr. |
790 | D | Das Ledger & ist nicht definiert und kann daher nicht gelöscht werden. |
791 | D | Die Satzart & ist nicht erlaubt. |
792 | D | Berechtigung zum Rücksetzen von Daten nicht vorhanden |
793 | D | Bitte geben Sie konsistente Daten ein |
794 | D | Bitte geben Sie ein Ledger ein |
795 | D | Die Tabelle & ist nicht definiert |
796 | D | Bitte korrigieren Sie Ihre Eingabe |
797 | D | Es wurden keine Sätze in der Datenbank gefunden |
798 | D | Fehler beim Speichern der Daten für Ledger & und Buchungskreis & |
799 | D | Bitte überprüfen Sie die Eingabe des Buchungskreises/der Gesellschaft |
800 | D | Periodenweises Löschen ist nur für Istdaten zulässig |
801 | D | Bitte Von-Periode eingeben |
802 | D | Löschen von Perioden und zusätzliches Prüfen der Indextab. nicht möglich |
803 | D | Wollen Sie nicht die zugehörigen Einzelposten löschen? |
804 | D | Eingabe von Periode 0 (Initialwert) ist nicht möglich |
805 | D | Für das Ledger & der Summentabelle GLT0 ist keine Abstimmung möglich |
806 | D | Bitte geben Sie ein Ledger oder eine Summentabelle ein |
807 | D | Das Von-Konto ist grösser als das Bis-Konto |
808 | D | Bitte Von-Konto eingeben |
809 | D | Das Feld & ist kein Schlüsselfeld in Tabelle & |
810 | D | Achtung beim Löschen des festen Ledgers & |
811 | D | Feste Tabellen dürfen nicht gelöscht werden |
812 | D | Löschen von Bewegungsdaten aus Ledger & ist nicht möglich |
826 | D | |
827 | D | Keine Berechtigung zum Anlegen des Sets & |
828 | D | Keine Berechtigung zum Ändern des Sets & |
829 | D | Keine Berechtigung zum Anzeigen des Sets & |
830 | D | Keine Berechtigung zum Löschen des Sets & |
831 | D | Keine Berechtigung zum Verwenden des Sets & |
832 | D | Preislistenkomponente & ist nicht installiert |
833 | D | Tabelle & ist in keiner Preislistenkomponente |
834 | D | Keine Berechtigung für Tabelle & |
840 | D | Datenbank-Änderung für Ledger &, Satztyp &, Version & nicht erlaubt |
841 | D | Datenbank-Anzeige für Ledger &, Satztyp &, Version & nicht erlaubt |
847 | D | Keine Berechtigung Hinzufügen Cycle & in Tab & |
848 | D | Keine Berechtigung Ändern Cycle & in Tab & |
849 | D | Keine Berechtigung Anzeigen Cycle & in Tab & |
850 | D | Keine Berechtigung Löschen Cycle & in Tab & |
851 | D | Keine Berechtigung Verwenden Cycle & in Tab & |
852 | D | DB-Änderung für Gsnr & und Cycle-Satzdaten nicht erlaubt |
853 | D | DB-Verwendung für Gsnr & und Cycle-Satzdaten nicht erlaubt |
856 | D | Keine Berechtigung für Variable & |
857 | D | Keine Berechtigung zum Ändern der Tabelle & |
858 | D | Keine Berechtigung zum Anzeigen der Tabelle & |
859 | D | Keine Berechtigung zum Anlegen der Variablen |
860 | D | Keine Berechtigung zum Ändern der Variablen & |
861 | D | Keine Berechtigung zum Anzeigen der Variablen & |
862 | D | Keine Berechtigung zum Löschen der Variablen & |
863 | D | Keine Berechtigung zum Verwenden der Variablen & |
864 | D | Keine Berechtigung zum Anlegen von Sets |
865 | D | Keine Berechtigung zum Anlegen dieses Sets |
866 | D | Keine Berechtigung zum Ändern von Sets |
867 | D | Keine Berechtigung zum Ändern dieses Sets |
868 | D | Keine Berechtigung zum Anzeigen von Sets |
869 | D | Keine Berechtigung zum Anzeigen diese Sets |
870 | D | Keine Berechtigung zum Löschen von Sets |
871 | D | Keine Berechtigung zum Löschen dieses Sets |
872 | D | Keine Berechtigung zum Anlegen von Variablen |
873 | D | Keine Berechtigung zum Anlegen dieser Variablen |
874 | D | Keine Berechtigung zum Ändern von Variablen |
875 | D | Keine Berechtigung zum Ändern dieser Variablen |
876 | D | Keine Berechtigung zum Anzeigen von Variablen |
877 | D | Keine Berechtigung zum Anzeigen dieser Variablen |
878 | D | Keine Berechtigung zum Löschen von Variablen |
879 | D | Keine Berechtigung zum Löschen dieser Variablen |
880 | D | Keine Berechtigung zum Anlegen von Werten |
881 | D | Keine Berechtigung zum Ändern von Werten |
882 | D | Keine Berechtigung zum Anzeigen von Werten |
883 | D | Keine Berechtigung zum Löschen von Werten |
900 | D | ****************Nachrichten für Umsetzung und Migration***************** |
901 | D | Pool-Tabelle & wird nur noch bis Rel. 4.6C unterstützt -> Langtext |
903 | D | Fehler beim Öffnen der angegebenen Exportdatei |
904 | D | Es sind keine Daten in der Ursprungstabelle vorhanden |
905 | D | Die angegebene Exportdatei enthält Daten im falschen Format |
906 | D | Die Zieltabelle enthält bereits Daten |
907 | D | Systemfehler beim Sperren des Reports & aufgetreten |
908 | D | Der Report & wird gerade bearbeitet |
909 | D | Bitte geben Sie eine gültige Exportdatei ein |
910 | D | Die Tabelle & hat den falschen Typ |
913 | D | Fehler beim Schreiben eines Satzes in Tabelle & |
914 | D | Fehler beim Löschen eines Satzes in Tabelle & |
915 | D | Bei Datenfreigabe werden die Daten der Tabelle & gelöscht |
916 | D | Bitte geben Sie einen korrekten Migrationsmodus ein |
918 | D | Tabelle & und Tabelle & haben nicht den gleichen Typ |
919 | D | Bitte entweder Buchungskreis oder Gesellschaft eingeben |
920 | D | Es wurden keine Differenzen zwischen beiden Tabellen festgestellt |
921 | D | Es wurden Differenzen zwischen den Tabellen festgestellt -> Langtext |
922 | D | Keine Daten in Tabelle & zu den Selektionskriterien vorhanden |
923 | D | Keine Daten in den Tabellen zu den Selektionskriterien vorhanden |
924 | D | Bitte geben Sie nur Buchungskreise ein |
925 | D | Bitte geben Sie nur Gesellschaften ein |
927 | D | Bitte den Benutzer-Exit & nur einmal verwenden |
928 | D | Bitte für Benutzer-Exit & ein Ursprungsfeld eingeben |
929 | D | Bitte für Zielfeld & ein Ursprungsfeld eingeben |
930 | D | PROTOKOLL FÜR DIE UMSETZUNG VON TABELLE & NACH TABELLE & |
931 | D | Es traten Fehler bei der Umsetzung auf |
932 | D | UMSETZUNG VON TABELLE & NACH TABELLE & BEENDET |
933 | D | Tabelle & ist nicht vorhanden |
934 | D | Tabelle & ist keine Summentabelle |
935 | D | Tabelle & ist keine objekthaltige Tabelle |
936 | D | Der Name der Zieltabelle muß mit 'Y' oder 'Z' beginnen |
937 | D | Kein Eintrag für Zielfeld & bei den Feldübertragungen vorhanden |
938 | D | Einstellungen für Umsetzung von & auf & sind formal richtig |
939 | D | Kein Eintrag für Urspr.feld & bei den Feldübertragungen vorhanden |
940 | D | Zielfeld & wird auf Initialwert gesetzt |
941 | D | Die angegebene Exportdatei enthält bereits andere Daten |
942 | D | Die angegebene Exportdatei enthält bereits Daten zu Tabelle & |
943 | D | Bitte entweder 'Anzahl' eingeben oder 'Bestimmen Anzahl' ankreuzen |
944 | D | Bei Datenfreigabe wird die Anzahl der Sätze in Tabelle & bestimmt |
945 | D | Entweder 'Standard-Exportdatei' ankreuzen oder andere Datei eingeben |
946 | D | Die Exportdatei & ist nicht zum Schreiben geöffnet |
947 | D | Die Exportdatei & ist nicht zum Lesen geöffnet |
948 | D | Die Exportdatei wird bereits bearbeitet |
949 | D | Die Tabelle & wird bereits bearbeitet |
950 | D | Bitte beachten Sie die Konsequenzen der portionierten Umsetzung -> F1 |
951 | D | Bitte überprüfen Sie die Speicherkapazität der angegebenen Exportdatei |
952 | D | Das Von-Geschäftsjahr liegt zeitlich nach dem Bis-Geschäftsjahr |
953 | D | Geschäftsjahre können nur bei Einzelpostentabellen verwendet werden |
954 | D | Umsetzung der Allokationstabellen wurde um & Uhr gestartet |
955 | D | Fehler beim Löschen: & & & & |
956 | D | Fehler beim Schreiben: & & & & |
957 | D | Fehler beim Ändern: & & & & |
958 | D | Umsetzung der Allokationstabellen wurde um & Uhr beendet |
959 | D | Tabelle & kann nicht bearbeitet werden |
960 | D | Bitte unterschiedliche Tabellen eingeben |
961 | D | Bitte geben Sie nur Einzelpostentabellen ein |
962 | D | Bitte geben Sie nur Summentabellen ein |
963 | D | Bitte prüfen Sie, ob eine Sicherung der Tabelle & existiert |
964 | D | Keine Daten in Tabelle TUMDB zur Selektion & & &. |
965 | D | Fehler beim Schreiben eines Satzes in die Einzelpostentabelle -> F1 |
968 | D | Bitte prüfen Sie, ob eine Offline-Datenbank-Sicherung existiert |
969 | D | Bei der Ausführung dieses Programmes werden Bewegungsdaten gelöscht |
970 | D | Bei der Ausführung dieses Programms werden Steuerungsdaten gelöscht |
971 | D | Zieltabelle & ist nicht transparent |
972 | D | Umsetzung nicht möglich, da Summentabelle noch nicht umgesetzt wurde |
973 | D | Umsetzung nicht möglich, da Steuerungstabellen noch nicht umgesetzt |
974 | D | Die umzusetzenden Tabellen sind in diesem Mandanten nicht installiert |
975 | D | Tabelle & ist nicht als Zieltabelle vorgesehen |
976 | D | Das Programm kann nur Online gestartet werden |
977 | D | Bei Datenfreigabe werden alle FI-SL-Pools gelöscht |
978 | D | Löschen der Pools nicht möglich, da noch Pooltabellen verwendet werden |
979 | D | Die Tabelle & wird bereits bearbeitet |
980 | D | Die Zieltabelle enthält bereits Daten -> Bitte Langtext lesen |
981 | D | Die Tabelle & muß auf die Tabelle & umgesetzt werden |
982 | D | Kontierungskombinationen für Tabelle & sind schon aktiv |
983 | D | Kontierungskombinationen für Tabelle & wurden aktiviert |
984 | D | Kontierungskombinationen für Tabelle & sind nicht aktiv |
985 | D | Kontierungskombinationen für Tabelle & wurden deaktiviert |
986 | D | Es ist kein logisches System für den Mandanten eingetragen |
987 | D | Mindestens ein Ledger muss ein logisches System führen |
000 | E | |
001 | E | No fields corresponding to the mask were found |
003 | E | An appropriate object was not found |
004 | E | No object was selected |
005 | E | Select one of the specified field names |
006 | E | This function exists |
010 | E | Beginning of page has been reached |
011 | E | End of page has been reached |
012 | E | The secondary index for this function is not defined (&) |
016 | E | & & & & |
017 | E | The totals match |
020 | E | Table & does not exist in the selection program |
028 | E | Start of the initialization of the group currency fields of GLT0 |
029 | E | End of the initialization of the group currency fields of GLT0 |
030 | E | Error in the initialization of the group currency fields |
031 | E | Conversion of table & : Activity & could not be changed/created |
032 | E | Conversion of table & : Error when deleting a table line |
033 | E | Conversion of table & : Error when inserting a table line |
034 | E | Conversion of table & : Error when changing a table line |
035 | E | Conversion of all tables successfully completed |
036 | E | Generation of Special Purpose Ledger completed |
037 | E | Blocking object for table & could not be included in T800A |
038 | E | Blocking object for table & has been included in table T800A |
039 | E | All blocking objects have already been maintained in T800A -> OK |
040 | E | Exit program & missing |
041 | E | Includes with summary and line item tables successfully generated |
042 | E | General selection routines generated for GD13, GD23, allocations |
043 | E | Selection routines generated for the master data |
044 | E | Routines generated for the direct posting to FI-SL |
045 | E | Code generated for variable field movements |
046 | E | Code generated for fixed field movements |
047 | E | Code generated for validation tables |
048 | E | Code generated for balance carried forward |
049 | E | Code generated for customizing |
050 | E | Code generated for the currency translation |
051 | E | Update routines and fixed field movements generated for rollups |
052 | E | Database interface SAPFGPLN generated for planning |
053 | E | Update function modules generated for planning |
054 | E | Update routines generated for allocations |
055 | E | Transformation modules generated for allocation and rollup |
056 | E | Code and table entries generated for the archiving |
057 | E | Client &: Activity & has been assigned to ledger & |
058 | E | Client &: Activity & has been assigned to ledger & and company code & |
059 | E | Client &: Activity & has been assigned to ledger & and global company & |
060 | E | Client &: Assignment activity &, ledger & deleted |
061 | E | Client &: Assignment activity &, ledger &, company code & deleted |
062 | E | Client &: Assignment activity &, ledger &, global company & deleted |
063 | E | Conversion of MM activities: do not enter RMML, RMBA and RMBE in SL |
064 | E | Conversion of MM activities successfully completed |
065 | E | Errors occurred in the conversion of MM activities |
066 | E | Error Insert T886A: Client & activity & ledger & |
067 | E | Error Insert T886B: Client & activity & ledger & company code & |
068 | E | Error Insert T886C: Client & activity & ledger & global company & |
069 | E | Control programs generated for validation/substitution |
070 | E | Program RGUDBANA for analyzing the table contents has been generated |
071 | E | Start of the update of ledger tables and currency and currency type |
072 | E | Client &: for ledger &, table & does not exist |
073 | E | Error during the update of the ledger table - Restart conversion |
074 | E | Client &: Company code & not found (ledger &) |
075 | E | Client &: Global company & not found (ledger &) |
076 | E | Error during the update of the assignments - Restart conversion |
077 | E | Client &: Ledger & not found |
078 | E | Internal error - Repeat conversion (clnt &, ld &, CT &) |
079 | E | Include program RGCATT01 has been generated for CATT procedures |
080 | E | Export and import programs for FI-SL distribution (ALE) generated |
081 | E | End of the update of ledger tables and currency and currency type |
082 | E | Reassignment of MM activities RMRU and RMWQ if ledger already has RMWA |
083 | E | Code generated for drilldown reporting |
084 | E | Table & is not a FI-SL summary table (type TT in T800A) |
085 | E | Table & does not exist in T800A or is not a FI-SL table |
086 | E | Index & not found for table & |
087 | E | Specify an index ID |
088 | E | Selection routines generated for deletion report RGUDEL00 |
089 | E | Conversion completed for table T889T to T889TE |
090 | E | Include programs have been generated for substitution and validation |
091 | E | Include programs for reversing FI-SL documents have been generated |
092 | E | Include programs for maintaining code combinations have been generated |
093 | E | Application: FI-SL Client &, XPRA & -> Read long text |
094 | E | INCLUDE programs generated for drilldown reporting |
095 | E | Programs generated for summary record display |
096 | E | Programs generated for single-entry report and report interface |
097 | E | Currency settings are adjusted for flexible general ledger |
098 | E | Code is generated after transport from flexible general ledger |
100 | E | |
101 | E | Sub-formula & not in Table 890 (-> &) |
102 | E | Field & & does not exist (-> &) |
103 | E | Missing data segment & (-> &) |
104 | E | Sub-formula & is used recursively |
105 | E | Missing operand (pos. & -> &) |
106 | E | Missing operator (pos. & -> &) |
107 | E | Missing '(' (pos. & -> &) |
108 | E | Empty brackets (pos. & -> &) |
109 | E | Syntax error in segment definition (pos. & -> &) |
110 | E | Set ID is too long (Pos.& -> &) |
111 | E | Missing ')' (pos. & -> &) |
112 | E | Field name is too long (Pos.& -> &) |
113 | E | Missing '-' (pos. & -> &) |
114 | E | Incorrect value entry (Pos.& -> &) |
115 | E | Internal error in subprogram & |
116 | E | Set & is not assigned to a table (-> &) |
117 | E | Field & is not assigned to a table (-> &) |
118 | E | Set & for table & does not exist (-> &) |
119 | E | & is missing in the field name |
120 | E | Table name & is too long |
121 | E | Missing '&' |
140 | E | |
141 | E | Field & does not exist |
142 | E | Table & does not exist. |
143 | E | Table & has no sender table |
144 | E | Header data not found for index & |
145 | E | Domain & does not exist |
160 | E | **************Messages for distribution (IDOCs)************************** |
161 | E | Message type & is invalid |
162 | E | Segments of Intermediate Document & are not in correct sequence |
163 | E | Data cannot be posted to ledger & |
164 | E | Company code & does not exist |
165 | E | Global company & does not exist |
166 | E | Neither company code nor global company filled |
167 | E | Data cannot be posted to the combination ledger & company code & |
168 | E | Data cannot be posted to the combination ledger & global company & |
169 | E | All records have been updated correctly |
170 | E | Internal error occured when sending the IDOC |
171 | E | Table & is not an active FI-SL summary table |
172 | E | There are already entries in EDIMAP for table & |
173 | E | There are no entries in EDIMAP for table & |
174 | E | Message type & cannot be processed |
175 | E | Intermediate Document type & cannot be processed |
176 | E | Caution when updating the assignment table -> See long text |
177 | E | Entries in the assignment table EDIMAP have been updated |
178 | E | Export and import programs have been generated for table & |
179 | E | Distribution settings have been reset for table & |
180 | E | Distribution of table & not possible |
181 | E | Error during ISO-CODE conversion of & |
182 | E | An error occurred when converting currency & |
200 | E | |
201 | E | No master record maintained for global company & |
202 | E | Argument & not in table & |
203 | E | No master record maintained for ledger & |
204 | E | Enter exchange rate type for reference exchange rate |
205 | E | Error when determining the currency key of global company & |
206 | E | Period must be numeric |
207 | E | The currency type & assigned to the ledger is incorrect |
208 | E | Enter period less than 999 |
209 | E | No master record maintained for company code & |
210 | E | Global company & was entered in group currency |
211 | E | Error when determining the currency key of company code & |
212 | E | A currency translation group does not exist for global company & |
213 | E | A currency translation method does not exist for company code & |
214 | E | Only list types 1-3 and 9 allowed |
215 | E | Version & not assigned to ledger & |
216 | E | No master data found & & |
217 | E | Key field & missing in database & |
218 | E | & &/&/&: Actual posting not possible |
219 | E | One of the three fields &, & or & must be a key in the database & |
220 | E | & &/&/&: Planning not possible |
221 | E | The versions of ledger & are not defined correctly |
222 | E | Summary table & has not been defined correctly (see ledger &) |
223 | E | Use reference exchange rate type '*' in the special purpose ledgers |
230 | E | |
250 | E | |
251 | E | Ledger & does not store a transaction currency |
252 | E | Ledger & does not store a local currency |
253 | E | Enter a local ledger |
254 | E | Enter a valid version |
255 | E | Enter a valid fiscal year |
256 | E | Comparison only possible with debits/credits indicator - BLANK |
257 | E | The to-period must come after the from-period |
258 | E | A maximum of 16 periods are supported |
259 | E | Choose a different line |
260 | E | Enter a valid debits/credits indicator |
261 | E | Ledger 0 stores currency &, but ledger & stores currency & |
262 | E | There were differences in the local currency |
263 | E | There were no differences in the local currency. |
264 | E | There were differences in the transaction currency. |
265 | E | There were no differences in the transaction currency. |
266 | E | Select at least one key figure |
267 | E | No data exists in ledger & for the selection criteria |
268 | E | No data exists in either ledger for the selection criteria |
269 | E | Differences found in & |
270 | E | No differences found during comparison |
271 | E | Enter a clearing account |
272 | E | Currency differences will be cleared -> See long text |
273 | E | Overlapping periods -> correct period display not possible |
274 | E | Ledger comparison not possible for table & |
275 | E | Comparison not possible because ledger & has chart of accts & |
276 | E | No clearing possible for this combination |
277 | E | Activate the 'Display currencies' indicator |
278 | E | The 'Clear differences' indicator is ignored online |
279 | E | Enter a currency type for initial display |
280 | E | No clearing necessary because no differences appeared |
281 | E | Complete clearing is not possible due to records with amount 0 |
282 | E | Clearing posting not possible to account & |
283 | E | Overlapping periods for company code & (variants & and &) |
284 | E | Clearing document & was posted |
285 | E | Messages occurred during comparison -> Check messages |
286 | E | Overlapping periods for global company & (variants & and &) |
287 | E | A group or alternative account was not assigned to some G/L accounts |
288 | E | No authorization for ledger &, record type &, version &, CC & |
289 | E | No authorization for ledger &, rec type &, version &, global comp. & |
290 | E | You do not have authorization for clearing differences |
291 | E | Business area consolidation ledger - Read long text |
292 | E | Comparison of different charts of account - See long text |
293 | E | In company code/global company &1, currency type &2 compared to &3 |
294 | E | Account & not created in company code & |
295 | E | Account & not valid for global company & -> long text |
296 | E | Enter a master data company code for global company & |
297 | E | First enter a valid ledger |
298 | E | Select a valid column |
299 | E | Detailed display only supports tables of the same type |
300 | E | Detailed display only possible when using the same chart of accounts |
301 | E | Objects with leading numerals may not be created |
302 | E | Objects with leading zero may not be changed |
303 | E | Objects with leading zero may not be deleted |
304 | E | You are changing an object in the SAP naming range |
305 | E | No valid ledger/company code/company combination found |
306 | E | No clearing postings can be made to ledger & |
307 | E | Only enter standard ledgers of table GLT0 |
308 | E | Transaction code & is not supported |
309 | E | |
310 | E | You do not have authorization to create standard layouts |
311 | E | You do not have authorization to create this standard layout |
312 | E | You do not have authorization to change standard layouts |
313 | E | You do not have authorization to change this standard layout |
314 | E | You do not have authorization to display standard layouts |
315 | E | You do not have authorization to display this standard layout |
316 | E | You do not have authorization to delete standard layouts |
317 | E | You do not have authorization to delete this standard layout |
320 | E | You do not have authorization to create libraries |
321 | E | You do not have authorization to create this library |
322 | E | You do not have authorization to change libraries |
323 | E | You do not have authorization to change this library |
324 | E | You do not have authorization to display libraries |
325 | E | You do not have authorization to display this library |
326 | E | You do not have authorization to delete libraries |
327 | E | You do not have authorization to delete this library |
330 | E | You do not have authorization to create reports |
331 | E | You do not have authorization to create this report |
332 | E | You do not have authorization to change reports |
333 | E | You do not have authorization to change this report |
334 | E | You do not have authorization to display reports |
335 | E | You do not have authorization to display this report |
336 | E | You do not have authorization to delete reports |
337 | E | You do not have authorization to delete this report |
340 | E | You do not have authorization to create parallel reports |
341 | E | You do not have authorization to create this parallel report |
342 | E | You do not have authorization to change parallel reports |
343 | E | You do not have authorization to change this parallel report |
344 | E | You do not have authorization to display parallel reports |
345 | E | You do not have authorization to display this parallel report |
346 | E | You do not have authorization to delete parallel reports |
347 | E | You do not have authorization to delete this parallel report |
350 | E | You do not have authorization to create report groups |
351 | E | You do not have authorization to create this report group |
352 | E | You do not have authorization to change report groups |
353 | E | You do not have authorization to change this report group |
354 | E | You do not have authorization to display report groups |
355 | E | You do not have authorization to display this report group |
356 | E | You do not have authorization to delete report groups |
357 | E | You do not have authorization to delete this report group |
358 | E | You do not have authorization to generate this report group |
360 | E | A new session was opened for maintaining authorization groups |
362 | E | Do not use any of the objects generated by flexible analyses |
390 | E | |
391 | E | Error during assignment of selection screens to summary tables |
392 | E | Generate program & first using & |
393 | E | The ALV grid cannot be used for the simulated document display |
400 | E | |
405 | E | Enter a numeric value |
406 | E | Enter date in a different format |
407 | E | Date does not exist |
408 | E | Enter the time in a different format |
409 | E | Enter existing time |
410 | E | Value cannot be converted |
411 | E | The entry field is not in the correct format |
412 | E | Type & of the source field and & of the target field do not correspond |
444 | E | No information was found |
445 | E | Ledger & is an independent ledger -> Function not possible |
446 | E | Ledger & is a dependent ledger -> Function not possible |
470 | E | Error when changing table &, activity & |
471 | E | Error when deleting in table & |
472 | E | Error when writing in table & |
473 | E | Error when changing table &, field movement & |
500 | E | ************ Function group GUPD ***************************** |
501 | E | Period & in FiYr & is not open for posting |
502 | E | Assign ledger & to company code & |
503 | E | Assign ledger & to global company & |
504 | E | Create fiscal year variant & |
505 | E | Maintain the fiscal year variant & to & |
506 | E | Posting period & is not defined for fiscal year variant & |
507 | E | You do not have authorization for period & in year & |
508 | E | No periods were found for fiscal year variant &, year & |
509 | E | ********** EURO Conversion ******************************** |
510 | E | Table & has a blocking factor greater than 16. |
511 | E | Ledger & does not exist. |
512 | E | Table & is not actively installed. |
513 | E | Table & does not store a second or third currency. |
514 | E | Enter periods numerically. |
515 | E | Enter the to-period as greater than or equal to the from-period. |
516 | E | Field & does not exist in table &. |
517 | E | Enter an account. |
518 | E | Table & does not exist. |
519 | E | No records found. |
520 | E | Field RACCT does not exist in table &. |
521 | E | All documents balance to zero. |
522 | E | Account & not allowed in company code & |
523 | E | Account & not allowed in global company & |
524 | E | Table & will not be changed over (pool table, see long text) |
525 | E | No text found for ledger & in language & |
535 | E | ********************************RGUSLSEP********************************* |
538 | E | Neither summary records nor line items were selected |
539 | E | Field & was already output in the list |
540 | E | Field & does not exist in table & |
541 | E | No object number inconsistencies found for table & |
542 | E | & OBJNR inconsistencies found for table &, see list for details |
550 | E | *********************Messages for CATT*********************************** |
551 | E | The include program RGCATT01 has been successfully generated |
552 | E | Table & already exists in the Repository |
553 | E | Table & is already installed in FI-SL |
554 | E | Table & is not installed in FI-SL |
555 | E | Table & is not created in the Repository |
556 | E | The CATT processes cannot be started in client & |
557 | E | Creation or installation only possible if the table name has 6 characters |
558 | E | Reporting can currently only be tested for table & |
559 | E | The name of the table must begin with 'ZZ' |
560 | E | The 6th character of the table name must be 'T' |
561 | E | Test direct posting and bal. carry forward only possible for local tables |
600 | E | |
601 | E | Use program SAPF011 for the required ledger 00 |
602 | E | Ledger & is not supported |
603 | E | Balance c/f is not supported for ledger & |
604 | E | Ledger & is assigned table &, but this table is not supported |
605 | E | Ledger & is assigned table &, but this table has tab.type & instead of TT |
606 | E | Enter a company code for local ledger & |
607 | E | Enter a valid company code |
608 | E | Enter a global company for global ledger & |
609 | E | Enter a valid global company |
610 | E | Ledger & is not assigned to any of the specified company codes |
611 | E | Ledger & is not assigned to any of the specified global companies |
612 | E | Enter a valid record type |
613 | E | Version & is not defined |
614 | E | Enter a valid fiscal year |
615 | E | Ledger & is assigned table &, but this table does not have a program grp |
616 | E | A chart of accounts is not assigned to company code & |
617 | E | A chart of accounts is not assigned to global company &, ledger & |
618 | E | A chart of accounts is not assigned to company code &, ledger & |
619 | E | Grp chrt of accnts is not assgnd to operative chrt of accnts (CCde &) |
620 | E | No accounts to be processed found |
621 | E | No changes to be performed |
622 | E | Balance carryforward to fiscal year & successful |
623 | E | Balance carried forward successfully completed with messages |
624 | E | No country chart of accts assigned to CCde & |
625 | E | A carry-forward account is not assigned to chart of accounts & for CCde & |
626 | E | Information missing for compny code & and ledgr & - blnce not carried fwd |
627 | E | Missing information for company &, ledger & - balance not carried forward |
628 | E | Error during update of VTRHJ in company code/company &, ledger & |
629 | E | Balance carry forward could not be made -> Correct errors |
630 | E | No account processing by interval possible for & & |
631 | E | Ledger & cannot be carried forward using this transaction |
632 | E | Transaction code & is not supported |
633 | E | Carry forward the parallel currency ledgers also |
634 | E | First reverse cycle & for period 000 in & |
650 | E | Start of the conversion of the Customizing tables for 30A |
651 | E | Start of the conversion of table & |
652 | E | End of the conversion of table & |
653 | E | Error in the conversion of table & |
654 | E | End of the conversion of the Customizing tables for 30A |
655 | E | Error in field movement & &, sender table &, field & |
656 | E | In field movement & & there is a user exit for field & |
657 | E | Start of changes to FI-SL line items (add fields) |
658 | E | End of changes to FI-SL line items (add fields) |
659 | E | Line item table & has been successfully changed |
660 | E | Start of regeneration GLU1 |
661 | E | End of regeneration GLU1 |
662 | E | The line item table & cannot be enhanced |
663 | E | Begin generating GLU2 |
664 | E | End generating GLU2 |
665 | E | Beginning of the conversion of tables T80U and T80UT |
666 | E | End of the conversion of tables T80U and T80UT |
667 | E | No exit pool entered. |
668 | E | Begin of the conversion of view T_T001B_GL (FI-SL posting periods) |
669 | E | End of the conversion of veiw V_T001B_GL (FI-SL posting periods) |
670 | E | Start conversion of view V_T892U (rollup substitution) |
671 | E | End conversion of view V_T892U (rollup substitution) |
672 | E | Condition in SUBACT & SEQNR cannot be converted |
673 | E | Error when writing a record to table & |
674 | E | Error when writing a record to table T892U |
675 | E | Incorrect syntax in SUBACT & SEQNR & -> conversion not possible |
676 | E | Prefix 'RGUUMG' reserved for generated conversion reports |
700 | E | ************ Master data check, utilities ******************** |
701 | E | Company code & does not exist |
702 | E | Master data maintenance for combination & & not possible (T800D) |
703 | E | Enter a later to-date |
704 | E | The table is not in T800A as a summary table |
705 | E | You have entered identical values with overlapping date |
706 | E | Entry overlaps existing values |
707 | E | Table for field & cannot be blocked |
708 | E | Enter a from-date |
709 | E | Error in determining the higher-level field |
710 | E | Saving carried out successfully |
711 | E | No data found. Please check entry |
712 | E | Entry cannot be activated because of overlapping active dates |
713 | E | Combination without field name not possible |
714 | E | Combination without table not possible |
715 | E | Table & is not supported |
716 | E | Global company & does not exist |
720 | E | Position cursor on a valid line |
721 | E | Error in reading internal table |
722 | E | The combination is currently blocked by another user |
723 | E | Blocking error |
724 | E | Place cursor on valid line |
725 | E | Check the selection values |
726 | E | Incorrect tables, master data table & cannot be used |
727 | E | The text of the higher-level field was not found |
728 | E | No valid user exit specified |
729 | E | The master data table can only be used for local fields |
730 | E | No information found for ledger & and version & |
731 | E | No text information found for ledger & and version & |
732 | E | No valid versions found for ledger & |
735 | E | ************Maintain object tables + validate code combinations********* |
736 | E | You are not authorized to display code combinations |
737 | E | You are not authorized to maintain code combinations |
738 | E | Maintenance of code combinations is not possible for table & |
749 | E | Enter document number |
750 | E | ********Maintain object table (code combinations) |
751 | E | Position cursor on a valid line |
752 | E | Mark end of block |
753 | E | Block is selected |
754 | E | Enter date in the correct format (see user defaults) |
755 | E | Table & is not a FI-SL summary table with objects |
756 | E | Only enter from/to values OR sets |
757 | E | Enter a valid set (see the long text) |
758 | E | Maintenance of the code combinations for tab.& is blocked by another user |
759 | E | The block could not be set (system error) |
760 | E | Enter a to-value that is greater than the from-value |
761 | E | Select the lines |
762 | E | Code combinations have been saved |
763 | E | Set from-to values OR the initial value |
764 | E | Specify from-to values or set the initial value indicator |
765 | E | Invalid code combinations (table &) |
766 | E | No valid combinations could be formed |
767 | E | No entry in table T800D for &-& |
768 | E | Enter year |
769 | E | Enter document date |
770 | E | ******Error messages for deletion report RGUDEL00************************ |
771 | E | The calling application cannot be identified |
772 | E | You cannot delete the data for table & |
773 | E | You cannot delete the transaction data of ledger & |
774 | E | You cannot delete the transaction data of ledger & |
775 | E | Internal error |
776 | E | Enter a ledger first |
777 | E | The From-period is greater than the To-period |
778 | E | You cannot delete all the FI-SL transaction data |
779 | E | You cannot delete the transaction data of table & |
780 | E | Ledger & is set as productive |
781 | E | Ledger & does not exist |
782 | E | Table & is not defined |
783 | E | You cannot delete ledger & of table GLT0 |
784 | E | Data will be lost. See long text. |
785 | E | The entry is not consistent |
786 | E | You cannot delete table & |
787 | E | Entry & is not supported |
788 | E | Transfer a correct company code |
789 | E | Transfer a fiscal year |
790 | E | Ledger & is not defined and cannot therefore be deleted |
791 | E | Record type & is not allowed |
792 | E | You do not have authorization to reset data |
793 | E | Enter consistent data |
794 | E | Enter a ledger |
795 | E | Table & is not defined |
796 | E | Correct your entry |
797 | E | No records found in the database |
798 | E | Error when storing the data for ledger & and company code & |
799 | E | Check your entry for company code/global company |
800 | E | Deletion by period(s) only permitted for actual data |
801 | E | Enter a from period |
802 | E | Deletion of periods and additional check of index tables not possible |
803 | E | Do you want to delete the accompanying line items? |
804 | E | Input of period 0 (initial value) is not possible |
805 | E | No Reconciliation possible for ledger & of summary table GLT0 |
806 | E | Enter a ledger or a summary table |
807 | E | The 'From' account is larger than the 'To' account |
808 | E | Enter 'From' account |
809 | E | Field & is not a key field in table & |
810 | E | Warning -- Deleting standard ledger & |
811 | E | Fixed tables may not be deleted |
812 | E | Not possible to delete transaction data from ledger & |
813 | E | No authorization to change report & & |
814 | E | No authorization to display report & & |
815 | E | No authorization to delete the report & & |
816 | E | No authorization to use report & & |
817 | E | No authorization to start report & & |
818 | E | No authorization to create parallel report & & 1 |
819 | E | No authorization to change parallel report & & |
820 | E | No authorization to display parallel report & & |
821 | E | No authorization to delete parallel report & & |
822 | E | No authorization to use parallel report & & |
823 | E | No authorization to start parallel report & & |
824 | E | No authorization to create the defaults & |
825 | E | No authorization to change the defaults & |
826 | E | |
827 | E | You do not have authorization to create set & |
828 | E | You do not have authorization to change set & |
829 | E | You do not have authorization to display set & |
830 | E | You do not have authorization to delete set & |
831 | E | You do not have authorization to use set & |
832 | E | The price list component & is not installed |
833 | E | Table & is not in a price list component |
834 | E | No authorization for table & |
835 | E | No authorization to create plan variant & |
836 | E | No authorization to change plan variant & |
837 | E | No authorization to display plan variant & |
838 | E | No authorization to delete plan variant & |
839 | E | No authorization to use plan variant & |
840 | E | Database change for ledger &, record type &, version & not allowed |
841 | E | Database display for ledger &, record type &, version & not allowed |
842 | E | No authorization to create rollup & |
843 | E | No authorization to change rollup & |
844 | E | No authorization to display rollup & |
845 | E | No authorization to delete rollup & |
846 | E | No authorization to use rollup & |
847 | E | You do not have authorization to create cycle & in tab. & |
848 | E | You do not have authorization to change cycle & in tab. & |
849 | E | You do not have authorization to display cycle & in tab. & |
850 | E | You do not have authorization to delete cycle & in tab. & |
851 | E | You do not have authorization to use cycle & in tab. & |
852 | E | DB change for CoID & and cycle record data not allowed |
853 | E | DB use for CoID & and cycle record data not allowed |
854 | E | No authorization for processing ledger & |
855 | E | No authorization for processing company & |
856 | E | You do not have authorization for variable & |
857 | E | You do not have authorization to change table & |
858 | E | You do not have authorization to display table & |
859 | E | You do not have authorization to create the variables |
860 | E | You do not have authorization to change the variables & |
861 | E | You do not have authorization to display the variables & |
862 | E | You do not have authorization to delete the variables & |
863 | E | You do not have authorization to use the variables & |
864 | E | You do not have authorization to create sets |
865 | E | You do not have authorization to create this set |
866 | E | You do not have authorization to change sets |
867 | E | You do not have authorization to change this set |
868 | E | You do not have authorization to display sets |
869 | E | You do not have authorization to display this set |
870 | E | You do not have authorization to delete sets |
871 | E | You do not have authorization to delete this set |
872 | E | You do not have authorization to create variables |
873 | E | You do not have authorization to create this variable |
874 | E | You do not have authorization to change variables |
875 | E | You do not have authorization to change this variable |
876 | E | You do not have authorization to display variables |
877 | E | You do not have authorization to display this variable |
878 | E | You do not have authorization to delete variables |
879 | E | You do not have authorization to delete this variable |
880 | E | You do not have authorization to create values |
881 | E | You do not have authorization to change values |
882 | E | You do not have authorization to display values |
883 | E | You do not have authorization to delete values |
884 | E | No authorization to display jobs |
885 | E | No authorization to display this job |
886 | E | No authorization to delete jobs |
887 | E | No authorization to delete this job |
888 | E | No authorization to generate this job |
890 | E | No authorization to create parallel reports |
891 | E | No authorization to create this parallel report |
892 | E | No authorization to change parallel reports |
893 | E | No authorization to change this parallel report |
894 | E | No authorization to display parallel reports |
895 | E | No authorization to display this parallel report |
896 | E | No authorization to delete parallel reports |
897 | E | No authorization to delete this parallel report |
900 | E | ***************Messages for the conversion and migration***************** |
901 | E | Pool table & only supported until 4.6C -> long text |
902 | E | Field movement & transfers fields from table & to table & |
903 | E | Error when opening the specified export file |
904 | E | No data exists in the source table |
905 | E | The specified export file contains data in the wrong format |
906 | E | The target table already contains data |
907 | E | A system error occurred when blocking report & |
908 | E | Report & is being edited |
909 | E | Enter a valid export file |
910 | E | Table & has the wrong table type |
911 | E | Maintain table TUMHT for object & |
912 | E | Maintain table TGUMS according to table TUMHT |
913 | E | Error when writing a record to table & |
914 | E | Error when deleting a record from table & |
915 | E | When you press Enter, data of table & will be deleted |
916 | E | Enter a correct migration mode |
917 | E | In table &, only use help table & |
918 | E | Table & and table & do not have the same type |
919 | E | Enter either company code or global company |
920 | E | No differences were found between the two tables |
921 | E | Differences were found between the tables -> Long text |
922 | E | No data exists in table & for the selection criteria entered |
923 | E | No data exists in the tables for the selection criteria entered |
924 | E | Enter company codes only |
925 | E | Enter global companies only |
926 | E | Tables TGUMS and TUMHT are inconsistent |
927 | E | Use user exit & once only |
928 | E | Enter a source field for user exit & |
929 | E | Enter a source field for target field & |
930 | E | LOG FOR THE CONVERSION FROM TABLE & TO TABLE & |
931 | E | Errors occurred during the conversion |
932 | E | CONVERSION OF TABLE & TO TABLE & COMPLETED |
933 | E | Table & does not exist |
934 | E | Table & is not a summary table |
935 | E | Table & is not a table with objects |
936 | E | The name of the target table must begin with 'Y' or 'Z' |
937 | E | There is no entry for target field & in the field movements |
938 | E | The settings for the conversion from & to & are formally correct |
939 | E | No entry exists for source field & in the field movements |
940 | E | Target field & is set to the initial value |
941 | E | The specified export file already contains other data |
942 | E | The specified export file already contains data for table & |
943 | E | Either enter 'No. of data records' or check off 'No.determined by system' |
944 | E | When you press Enter, the number of records in table & will be determined |
945 | E | Either check off 'Standard export file' or enter a different file |
946 | E | Export file & is not open for writing |
947 | E | Export file & is not open for reading |
948 | E | The export file is already being edited |
949 | E | Table & is already being edited |
950 | E | Note the effects of the partial conversion -> F1 |
951 | E | Check the storage capacity of the specified export file |
952 | E | The from fiscal year is after the to fiscal year |
953 | E | You can only use fiscal years with line item tables |
954 | E | Conversion of the allocation tables was started at & |
955 | E | Error when deleting: & & & & |
956 | E | Error when writing: & & & & |
957 | E | Error when changing: & & & & |
958 | E | Conversion of the allocation tables was completed at & |
959 | E | Table & cannot be processed |
960 | E | Enter different tables |
961 | E | Enter line item tables only |
962 | E | Enter summary tables only |
963 | E | Check whether there is a data backup for table & |
964 | E | No data in table TUMDB for selection & & & |
965 | E | Error occurred when writing a record to the line item table -> F1 |
966 | E | Ledger & has been assigned to table & |
967 | E | When you press Enter, ledger & will be assigned to table & |
968 | E | Check whether an off-line database backup exists |
969 | E | Transaction data will be deleted when you execute this program |
970 | E | Control data will be deleted when you execute this program |
971 | E | Target table & is not transparent |
972 | E | Conversion not possible because summary table has not yet been converted |
973 | E | Conversion not possible since control tables have not yet been converted |
974 | E | The tables to be converted are not installed in this client |
975 | E | Table & is not supported as a target table |
976 | E | The program can only be started online |
977 | E | When you press Enter, all FI-SL pools will be deleted |
978 | E | You cannot delete the pools since pooled tables are still used |
979 | E | Table & is already being edited |
980 | E | The target table already contains data -> Read long text |
981 | E | Table & must be converted to table & |
982 | E | Code combinations for table & are already active |
983 | E | Code combinations for table & have been activated |
984 | E | Code combinations for table & are not active |
985 | E | Code combinations for table & have been deactivated |
986 | E | No logical system entered for the clients |
987 | E | At least one ledger must manage a logical system |